Three Axle Articulated Trucks

360 Exterior View (HTML)

360 Interior View (HTML)

Details

Engine Model
Cat® C13B

Rated Payload
35.3 ton (US)

Heaped (SAE 2:1)
26.2 yd³

Contact

Contact Foley Equipment and ask for Sales

+1 (316) 943-4211

Request a Quote

Overview

Efficient Productivity

For tough quarry and mining jobs, rely on the Cat® 735 articulated truck. Its 35.3-ton (32-tonne) payload capacity is pass-matched with excavators and loaders to help you move more material and boost productivity across any jobsite.

Benefits

RELIABLE PERFORMANCE

The redesigned dump body provides easier loading and maximum payload, while the C13B engine delivers the power you require, combined with relentless reliability.

BUILT-IN SAFETY

Designed for safe and convenient access with ground level service, and Dynamic Rollover Protection applies brakes when needed to help reduce the risk of rollovers.

ENHANCED OVERALL EFFICIENCY

Easily set job parameters with Body Height and Machine Speed Limiting, while achieving up to 16% more fuel efficiency with more dirt moved per fuel used.

Features at a Glance

PROVEN RELIABILITY

LONG TERM VALUE AND DURABILITY

ACHIEVE GREATER PRODUCTIVITY

POWERFUL EFFICIENCY

WORK IN COMFORT

TECHNOLOGY THAT GETS WORK DONE

BUILT-IN SAFETY FEATURES

LOWER MAINTENANCE COSTS

SUSTAINABILITY

The Cat® C13B engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
VisionLink® displays the CO2 emissions for monitored assets, calculated by fuel type for the Runtime Fuel Burned each day in a selected date range.
Don't waste fuel idling. Cat VisionLink® online fleet monitoring helps you manage idle time and reduce fuel burn and greenhouse gas emissions.
Cat® Stability Assist for Articulated Trucks helps improve machine safety and uptime by increasing awareness of machine stability during operation.
Cat® Production Measurement provides real-time payload weighing which help you maximize productivity, reduce fuel burn and greenhouse gas emissions, all while improving job site efficiency and lowering costs.

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer).

Specifications

Full Specifications

Engine: Engine Model
Cat® C13B

Gross Power (SAE J1995)
436 hp

Net Power (SAE J1349)
427 hp

Engine Power (ISO 14396)
431 hp

Bore
5.1 in

Stroke
6.2 in

Displacement
763 in³

Note (1)
Advertised power is tested at 1,800 rpm.

Note (2)
Advertised power is tested per the specified standard in effect at the time of manufacture.

Note (3)
Net power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed.

Note (4)
Net power when the fan is at maximum speed is 319 kW (427 hp) per the SAE reference conditions.

Note (5)
Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.

Note (6)
Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.

No Engine De-rating Below
12500 ft

Peak Engine Torque Gross (SAE J1995)
1627 lbf·ft

Peak Engine Torque Net (SAE J1349)
1612 lbf·ft

Peak Engine Torque Speed
1200 r/min

Weights: Rated Payload
35.3 ton (US)

Body Capacities: Heaped (SAE 2:1)
26.2 yd³

Struck
20.9 yd³

Tailgate Heaped SAE 2:1
28.4 yd³

Tailgate Struck
22.2 yd³

Transmission: Forward - 1
5 mile/h

Forward - 2
9 mile/h

Forward - 3
14 mile/h

Forward - 4
22 mile/h

Forward - 5
30 mile/h

Forward - 6
35 mile/h

Reverse - 1
6 mile/h

Sound Levels: Interior Cab
72 dB(A)

Note (1)
The declared dynamic operator sound pressure level is 72 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the cooling fan’s maximum speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.

Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Operating Weights: Front Axle - Empty
32584 lb

Center Axle - Empty
11199 lb

Rear Axle - Empty
10692 lb

Total - Empty
54476 lb

Front Axle - Rated Load
8938 lb

Center Axle - Rated Load
30805 lb

Rear Axle - Rated Load
30805 lb

Total - Rated Load
70548 lb

Front Axle - Loaded
41522 lb

Center Axle - Loaded
42005 lb

Rear Axle - Loaded
41498 lb

Total - Loaded
125024 lb

Body Plate: Type
High strength Brinell HB450 wear resistant steel

Body Plate Thickness: Front Plate
0.28 in

Base Plate
0.51 in

Side Plates
0.43 in

Service Refill Capacities: Fuel Tank
105.7 gal (US)

DEF Tank
9.0 gal (US)

Cooling System
21.9 gal (US)

Hydraulic System
32.5 gal (US)

Engine Crankcase
11.4 gal (US)

Transmission
12.4 gal (US)

Final Drives/Differential
33 gal (US)

Output Transfer Gear Box
6.6 gal (US)

Body Hoist: Raise Time
12 s

Lower Time
11 s

Standards: Brakes
ISO 3450 – 2011

Cab - FOPS
ISO 3449 Level II – 2005

Cab - ROPS
ISO 3471 – 2008

Steering
ISO 5010 – 2019

Turning Circle: Turning Dimensions - Steer Angle - Left/Right
45°

Turning Dimensions - SAE Turning Radius
294 in

Turning Dimensions - Clearance Radius
318 in

Turning Dimensions - Inside Radius
153 in

Turning Dimensions - Aisle Width
210 in

Note
Dimensions are for machines equipped with 750/65 R25 tires.

Steering: Lock to Lock
4.75 seconds @ 60 rpm

Optimal Loader/Truck Pass Matching: Hydraulic Excavators: 350/352 - Passes
4-5

Hydraulic Excavators: 336 - Passes
5-6

Wheel Loaders: 972/972 XE - Passes
3-4

Wheel Loaders: 966/966 XE - Passes
4

Wheel Loader: 962 - Passes
4-5

Wheel Loader: 950 - Passes
5

Note
An optimum system match gives you a major productivity advantage. The 735 is an excellent match for the Cat 350/352 and 336 Hydraulic Excavators; and Cat 972, 966, 962 and 950 Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved.

Equipment

Standard Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

Retractable belt: Operator seat and second seat
Touchscreen display incorporating the rearview camera video feed
Windshield wiper and washer, two speed, intermittent (front)
Mirrors: exterior
Windows opening side, tinted
Heater and defroster with four-speed fan
Glass windows:
– Front, laminated and tinted
– Sides and rear, toughened and tinted
Sun visor
Secondary steering – electro hydraulic
Machine operation monitoring system includes:
– Action lamp
– Engine oil pressure
– Primary steering system
– Left and right turn signal
– High beam
– Coolant temperature
– Tachometer
– Parking brake
– Fuel level
– Transmission oil temperature
– Brake system
– Transmission hold
– Hoist control
– Hydraulic system
– Charging system
– Retarder
– Transmission fault
– Traction control system
– Check engine lamp
Air conditioning
Combined gear selection and hoist control lever
Seats:
– Operator: fully adjustable, air suspension
– Trainer: padded with lap belt
Liquid Crystal Display (LCD):
– Alert indicator
– Selected gear and direction
– Speed or auto shift
– Review Operation and Maintenance Manual (OMM)
– Primary steering failure warning
– Seat belt warning
– Secondary steering failure warning
– Diesel Particulate Filter (DPF) regeneration filter
– Secondary steering energy source engaged
– Hour meter
– Retarder active
Storage:
– Cup holder
– Flask receptacle
– Under seat storage
– Door pocket
– Behind operator seat storage
– Coat hook
Tilt and telescopic steering wheel
Adjustable air vents

TECHNOLOGY

Product Link Cellular PLE643
Cat® Detect with Stability Assist

ELECTRICAL AND LIGHTING

Remote starting receptacle (cables not included)
Electrical system: 24-volt, 10A 24- to 12-volt converter
Horn
Lighting systems:
– Cab interior
– Two head lamps
– Two width marker
– Two reversing
– Work light/cab access light
– Two stop/tail lights
– Front and rear direction indicators
Main disconnect switch
Batteries (x2) maintenance free

POWERTRAIN

Cat Clean Emission Module (CEM) and exhaust aftertreatment package
Three axle, six-wheel drive
Auto shift six-speed forward and single-speed reverse transmission
Retarder: engine compression brake and hydraulic
Dual circuit oil immersed, enclosed brakes – all wheels
Cat C13B engine
Differentials: standard with automatic clutched inter- and cross-axle differential locks

SAFETY

Rollover protective structure/Falling objects protective structure (ROPS/FOPS) cab
Rearview camera
Reverse alarm

GUARDS

Crankcase
Front dump body spill guard, integral part of fabricated body
Rear window
Radiator

OTHER STANDARD EQUIPMENT

Vandalism protection: lockable caps
Tires, six 750/65 R25
Mud flaps: wheel arch and body mounted with transportation tiebacks
Scheduled Oil Sampling (S•O•S) sampling valves
Sound suppression (standard in some countries*)
*Countries are EU countries plus Iceland, Norway, Lichtenstein, Switzerland, Türkiye and UK.

Optional Equipment

NOTE