Open Bowl Scrapers

360 Exterior View

360 Interior View

Details

Flywheel Power - Tractor/Scraper
570 hp

Scraper Capacity - Heaped
34 yd³

Top Speed - Loaded
34.7 mile/h

Contact

Contact Foley Equipment and ask for Sales

+1 (316) 943-4211

Request a Quote

Overview

High performance

Cat’s 637 Wheel Tractor-Scraper is engineered to conquer challenges operators face worldwide. With its strength and durability, it works in some of the most difficult conditions and materials one can find.

Benefits

Increased

Ergonomic controls and a newly redesigned cab interior provide a more comfortable and efficient working environment all day long

Improved

Improvements in fuel efficiency and the new APECS transmission controls deliver more productivity in most applications

Additional

New safety features help operators be more productive and work more efficiently all day long

Features at a Glance

Be More Productive

Be More Productive

Advanced productivity electronic control system (APECS) allows the engine and transmission to communicate on a high level. This communication allows the machine to better utilize the power and torque the engine is producing. The net result is moving more material.
Use ground speed control to set the desired top speed and the machine will find the gear that works best for the engine and the transmission, providing a lower fuel burn.
The machine speed limit feature replaces top gear selection, allowing the machine to find the correct gear that works best for the engine and transmission. Pulling the load in the correct gear, in most cases, results in a lower engine load factor and lower fuel burn.
Auto-stall assists in quickly bringing the transmission to an operating temperature at startup when the machine is working in a cold climate region.
Cat Payload for scrapers is an earthmoving solution for optimal payload and job site efficiency. Cat Payload achieves on-the-go weighing using bowl lift cylinder pressure during the loaded haul segment. Cat Payload is optimized to be used with sequence assist, which provides increased productivity with less operator effort. Cat Payload is an automatic feature when ordered with sequence assist.

Work in Comfort

Work in Comfort

Reduce up to 14 individual operator commands per cycle with Sequence Assist.
Steer with less effort using the newly designed high-pressure steering system.Enjoy interior improvements and a more ergonomic work environment with a 21% larger cab than the G Series cab.
Intuitive, ergonomic controls keep operators focused on their work.
Maintain desired cab temperature with automatic temperature
control.

Designed for Safety

Designed for Safety

Enhance an operator’s awareness of site surroundings with the Work Area Vision System (WAVS).
Get in and out of the cab easier with the new powered access ladder system (optional attachment).
Seat belt indicator provides visual and audible alerts when the seatbelt is not in use.
The Advanced Cushion Hitch allows the cushion hitch to prevent endstroke by predicting endstroke events and managing the rate of dampening, resulting in reduced hitch maintenance and improved operator ride in rough conditions.
Easy ground-level access to fuel fill, tractor fuel filters, and tractor engine oil filter.

Easy to Operate

Easy to Operate

The spacious cab features easy, intuitive controls and excellent visibility. The cab provides a comfortable working environment for all-day operations.
Cat Advanced Ride Management (ARM) seat suspension reduces end stroke movement of the load cylinder for a smoother ride.
Engine overspeed protection will automatically engage with no operator input when the machine is in eighth gear. The machine will assist in slowing the machine’s speed by canceling the throttle command and engaging the engine compression brake.

Integrated Cat Technologies

Integrated Cat Technologies

Monitor, manage, and enhance jobsite operations.
Hit target grade faster and more accurately with Cat Grade technologies. Finish jobs in fewer passes and with fewer operator efforts, saving you time and helping to increase profit.
Product Link™ collects machine data that can be viewed online
through web and mobile applications (optional attachment).
Access information anytime, anywhere with VisionLinkTM – use it to make informed decisions that boost productivity, lower costs, simplify maintenance, and improve safety and security on your
jobsite.
Shorten the learning curve for inexperienced operators with
Sequence Assist and Load Assist (included with Cat Grade
attachment).

Execute Efficiency

Execute Efficiency

The new tractor's hydraulic on-demand fan helps assist in lower fuel
consumption.
Using draft-arm overflow guards diverts material away from the bowl, preventing material from getting caught between the draft
arms and the bowl sides.
Cat Grade (optional attachment) intelligently ensures the machine does not cut below grade in a cut area or overfill in the fill area.

Specifications

Full Specifications

Engine: Emissions
Cat® C9.3 and C18 engines meet U.S. EPA Tier 4 Final/EU Stage IV emission standards.

Engine Model - Tractor
Cat® C18

Rated Engine RPM - Tractor
1900 r/min

Flywheel Power - Tractor
570 hp

Engine Model - Scraper
Cat® C9.3

Rated Engine RPM - Scraper
2150 r/min

Flywheel Power - Scraper
290 hp

General: Fuel Tank Refill Capacity - Scraper
370 gal (US)

Overall Width
12.93 ft

Overall Shipping Height
13.7 ft

Scraper Capacity - Struck
24 yd³

Scraper Capacity - Heaped
34 yd³

Rated Load
37 200 kg (82,200 lb); 37.2 tonnes (41.1 tons)

Width - Cut
11.50 ft

Maximum Depth of Cut
17.7 in

Maximum Depth of Spread
21.1 in

Top Speed - Loaded
34.7 mile/h

180° Curb-to-Curb Turning Width
40.12 ft

Tires - Tractor
37.25R35**E3

Tires - Scraper
37.25R35**E3

Tractor Engine: Flywheel Power - Tractor/Scraper
570 hp

Scraper Bowl: Scraper Capacity - Heaped
34 yd³

Transmission: Top Speed - Loaded
34.7 mile/h

Travel Speeds - Runout: Transmission Gear - First
3.4 mile/h

Transmission Gear - Second
6.2 mile/h

Transmission Gear - Third
7.7 mile/h

Transmission Gear - Fourth
10.5 mile/h

Transmission Gear - Fifth
14.1 mile/h

Transmission Gear - Sixth
19.0 mile/h

Transmission Gear - Seventh
25.7 mile/h

Transmission Gear - Eighth
34.7 mile/h

Transmission Gear - Reverse
6.2 mile/h

Service Refill Capacities: Real Wheels (Each)
2.37 gal (US)

Crankcase - Tractor
13.7 gal (US)

Transmission System - Tractor
29 gal (US)

Cooling System - Tractor
18.75 gal (US)

Cooling System - Scraper
10.8 gal (US)

Fuel Tank
370 gal (US)

Hydraulic System
37.5 gal (US)

Crankcase - Scraper
6.5 gal (US)

Diesel Exhaust Fluid (DEF)*
8.0 gal (US)

Diesel Exhaust Fluid - Scraper
5.8 gal (US)

Transmission System - Scraper
12.9 gal (US)

Diesel Exhaust Fluid - Tractor
8 gal (US)

Dimensions: Width - Overall Machine
155 in

Width - Overall Machine - Ladder Down
152.7 in

Width - Tractor
137.8 in

Width - Rear Tire Centers
96.9 in

Width - Inside of Bowl
134 in

Width - Outside Bowl - Shipping Width
143.1 in

Height - Top of Cab
149.8 in

Front of Tractor to Front Axle
142.2 in

Ground Clearance - Tractor
26.1 in

Axle to Vertical Hitch Pin
20 in

Height - Scraper Blade Maximum
20 in

Wheel Base
346.8 in

Length - Overall Machine - Standard
597 in

Length - Maximum (Push-Pull)
655.1 in

Rear Axle - Rear of Machine
90.2 in

Width - Outside Rear Tires
143.2 in

Extended Push Block (Push-Pull)
108 in

Height - Overall Shipping
163.2 in

Non Push-Pull: Overall Length
49.34 ft

Operating Weight - Empty
114950 lb

Push-Pull: Operating Weight - Empty
119060 lb

Overall Length - With Bail Down
54.59 ft

Cab: Exterior Sound Level
The exterior sound power level for the standard machine (ISO 6393) is 119 dB(A).

ROPS/FOPS
ROPS/FOPS meet “ISO Standards.”

Safety Criteria Compliance Standards: Steering System
ISO 5010:2007

Falling Object Protective Structure (FOPS)
ISO 3449:2005 Level II

Brakes
ISO 3450:2011

Rollover Protection Structure (ROPS)
ISO 3471:2008 for up to 21 282 kg (46,919 lb)

Reverse Alarm
ISO 9533:2010

Seat Belt
SAE J386:FEB2006

Implement Cycle Times: Bowl Raise
3.5 s

Bowl Lower
3.5 s

Apron Raise
4.0 s

Apron Lower
3.8 s

Ejector Extend
8.5 s

Ejector Retract
8.5 s

Bail Raise
1.5 s

Bail Lower
2.1 s

Equipment

Standard Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

POWER TRAIN – TRACTOR

Cat® C18 engine with MEUI™
Compression engine brake
Electric start, 24V
Air cleaner, dry type with precleaner
Fan, hydraulic
Ground level engine shutdown
Radiator, aluminum unit core, 9 fins per inch
Guard, crankcase
Starting aid, ether
Braking system:
- Primary and secondary, wet disc, hydraulic actuated
- Parking, hydraulic-released, spring-applied
Throttle lock
Transmission:
- 8-speed planetary power shift
- ECPC control
- APECS software
- Programmable top gear selection
- Transmission hold
- Differential lock
- Guard, power train
- Standard tire spin reduction
- Ground speed control
- Machine speed limit
- Differential lock protection

POWER TRAIN – SCRAPER

Cat® C9.3 engine:
- High pressure common rail fuel
- Constant lift engine brake
Electric start, 24V
Air cleaner, dry type with precleaner
Fan, mechanical driven
Ground level engine shutdown
Radiator, aluminum unit core, 9 fins per inch
Starting aid, either
Braking system:
- Primary and secondary, dry caliper, hydraulic actuated
Transmission:
- 4-speed (torque converter drive)
- Planetary power shift

ELECTRICAL – TRACTOR

Alternator, 150 Amp
Batteries (4), 12V, 1,000 CCA, maintenance free, high output
Electrical system, 24V
Lighting system:
- Headlights, LED
- Turn signals with hazard function, LED floodlights, (2) cutting edge (1) bowl, halogen side vision (2)
Starting/charging receptacle

ELECTRICAL – SCRAPER

Alarm, backup
Batteries (4) 12V, 1,000 CCA, maintenance free, high output
Alternator, 65 Amp
Electrical system, 24V
Lighting system:
- Brake lights, LED
- Turn signals with hazard function, LED

OPERATOR ENVIRONMENT – TRACTOR

HVAC system, heat, AC, defrost
Thermostat control of HVAC system
Coat hook
Lunchbox platform with holding strap
Diagnostic connection (2)
12V power ports (2)
Differential lock (1)
Dome courtesy light
Horn, electric
T-Handle implement control
Mirror, rearview
Radio ready
ROPS/FOPS cab, pressurized
Keypad switches:
- Throttle lock
- Wipers/washers
- Hazard lights
- Retarding level select
- Work lights on, off
- Information mode on Messenger Display
Safety tab rocker switches
Seat belt, static two-piece
Seat, Cat Advanced Ride Management (ARM), Cat Comfort Series 3, rotates 30 degrees
Steering wheel, tilt, telescoping, padded
Windows, right side emergency egress
Windows, sliding
Windows, laminated, zipped in
Windshield wipers, front and rear windows, includes washers
Door lock
Messenger Display
Gauges, warnings include:
- Coolant temperature
- Engine oil temperature
- Hydraulic oil temperature
- Diesel Particulate Filter (DPF) temperature
- Fuel level
- Park brake
- Implement lockout
- Brake system
- Regeneration required
- Throttle lock
- System voltage
- Secondary steering
- Bail down
- Ejector auto
- Differential lock
- Apron float
- Transmission hold
- Cushion hitch
- High beam lights
- Action lamp
- Engine speed, rpm
- Gear selection
- DEF fill levels

FLUIDS

Extended Life Coolant to –37° C (–34° F)

OTHER STANDARD EQUIPMENT – TRACTOR

Advanced cushion hitch
Accumulators (cushion hitch) with Canadian Registration Number (CRN)
Fast oil change
Fenders, non-metallic
Heater, engine coolant 120V
Rims (2)
Tow hooks, front
Vandalism locks
Heater, engine coolant 120V
Steering locks

OTHER STANDARD EQUIPMENT – SCRAPER

Bowl:
- 18.3 m3 (24 yd3), struck
- 26 m3 (34 yd3), heaped
Vandalism locks
Scraper fenders
Overflow guard
Fast oil change
Rims (2)
Hydraulic position sensing cylinders (bowl lift and apron)

Optional Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

STEERING ARRANGEMENTS

Secondary Steering Arrangement

INTEGRATED TECHNOLOGIES

Sequence Assist Arrangement with Payload Estimator
Load Assist
Cat Grade Control with Load Assist
Advanced Tire Spin Reduction

OTHER ATTACHMENTS

Camera arrangement – Work Area Vision System (WAVS)
Cab beacon
Air horn
Air horn and beacon
Wiring group
Push Pull

SERVICE INSTRUCTIONS

Film arrangement – U.S. (ANSI)
Film arrangement – International (ISO)

Resources

637K Product Brochure

637 (11A) Wheel Tractor-Scraper - Key Features (Global, excluding Japan)

637 (11A) Wheel Tractor-Scraper - Technical Specifications (Global, excluding Japan)

637 Wheel Tractor-Scraper

Details

Contact

Overview

High performance

Benefits

Increased

Improved

Additional

Features at a Glance

Be More Productive

Work in Comfort

Designed for Safety

Easy to Operate

Integrated Cat Technologies

Execute Efficiency

Specifications

Full Specifications

Equipment

Resources

Similar New Equipment

621 Wheel Tractor-Scraper

Open Bowl Scrapers

627 Wheel Tractor-Scraper

Open Bowl Scrapers

631 Wheel Tractor-Scraper

Open Bowl Scrapers

651 Wheel Tractor-Scraper

Open Bowl Scrapers

657 Wheel Tractor-Scraper