631 Wheel Tractor-Scraper
Open Bowl Scrapers
Details
Flywheel Power - Tractor/Scraper
570 hp
Scraper Capacity - Heaped
34 yd³
Top Speed - Loaded
34.7 mile/h
Overview
Delivers results
Quick loading, high travel speeds and the ability to load and dump on the run yield fast cycle times, allowing Cat Wheel Tractor-Scrapers to consistently deliver high productivity at the lowest cost per ton.
Benefits
Increased
Ergonomic controls and a newly redesigned cab interior provide a more comfortable and efficient working environment all day long
Improved
Improvements in fuel efficiency and the new APECS transmission controls deliver more productivity in most applications
Additional
New safety features help operators be more productive and work more efficiently all day long
Features at a Glance
- Be More Productive
-
Be More Productive
- The Advanced Productivity Electronic Control System (APECS) allows
the engine and transmission to communicate on a high level. This
communication allows the machine to utilize better the power
and torque the engine is producing. The net result is moving more
material. - Use Ground Speed Control to set the desired top speed and the machine will find the gear that works best for the engine and the
transmission, providing a lower fuel burn. - The machine speed limit feature allows the machine to maintain a
set top speed instead of relying on top gear selector. - Auto-Stall assists in quickly bringing the transmission to an
operating temperature at start-up when the machine is working in a cold climate region. - Cat® Payload for scrapers is an earthmoving solution for optimal payload and jobsite efficiency. Cat Payload achieves on-the-go weighing by using bowl lift cylinder pressure during the loaded haul segment. Cat Payload is optimized to be used with Sequence Assist, which provides increased productivity with less operator
effort. - Enhance productivity through the usage of Cat Payload with
Sequence Assist.
- The Advanced Productivity Electronic Control System (APECS) allows
- Work in Comfort
-
Work in comfort
- Reduce up to 14 individual operator commands per cycle with Sequence Assist.
- Steer with less effort using the newly designed high-pressure steering system.
- Enjoy interior improvements and a more ergonomic work
environment with a 21% larger cab than the G Series cab. - Intuitive, ergonomic controls keep operators focused on their work.
- Maintain desired cab temperature with automatic temperature control.
- Designed for Safety
-
Designed for Safety
Enhance an operator’s awareness of site surroundings with the work area vision system (WAVS).- Get in and out of the cab easier with the new powered access ladder system (optional attachment).
- Seat belt indicator provides visual and audible alerts when the seatbelt is not in use.
- Advanced Cushion Hitch allows the cushion hitch to prevent endstroke by predicting endstroke events and managing the rate of dampening, resulting in reduced hitch maintenance and improved operator ride in rough conditions.
- The fuel fill, fuel filter, engine oil filter, engine oil change, and water drain are easily accessible at ground level.
- Easy to Operate
-
Easy to Operate
- The spacious cab features easy, intuitive controls and excellent visibility
. The cab provides a comfortable working environment for all-day
operation.
Cat advanced ride management (ARM) seat suspension reduces end
stroke movement of the load cylinder for a smoother ride.
Engine overspeed protection will automatically engage with no operator
input when the machine is in eighth gear. The machine will assist in slowing the machine speed by canceling the throttle command and engaging the engine compression brake.
- The spacious cab features easy, intuitive controls and excellent visibility
- Integrated Cat Technologies
-
Integrated Cat Technologies
- Monitor, manage, and enhance jobsite operations.
- Hit the target grade faster and more accurately with Cat Grade technologies. Finish jobs in fewer passes and with less operator effort, saving you time and helping to increase profit.
- Product Link™ collects machine data that can be viewed online through web and mobile applications (optional attachment).
- Access information anytime, anywhere with VisionLink® – use it to make informed decisions that boost productivity, lower costs, simplify maintenance, and improve safety and security on your
jobsite. - Shorten the learning curve for inexperienced operators with
Sequence Assist and Load Assist (included with Cat Grade
attachment).
- Execute Efficiency
-
Execute Efficiency
- The new tractor hydraulic on -demand fan helps assist in lower fuel consumption.
- Using draft-arm overflow guards diverts material away from the bowl, preventing material from getting caught between the draft arms and the bowl sides.
- Cat Grade (optional attachment) intelligently ensures the machine does not cut below grade in a cut area or overfill in the fill area.
Specifications
Full Specifications
- Engine
-
Emissions
Cat® C18 engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.Engine Model - Tractor
Cat® C18Rated Engine RPM - Tractor
1900 r/minFlywheel Power - Tractor
570 hp
- General
-
Overall Width
12.11 ftOverall Shipping Height
12.9 ftScraper Capacity - Struck
24 yd³Scraper Capacity - Heaped
34 yd³Rated Load
37 200 kg (82,200 lb); 37.2 tonnes (41.1 tons)Width - Cut
17.7 ftMaximum Depth of Cut
12.4 inMaximum Depth of Spread
21.1 inTop Speed - Loaded
34.7 mile/h180° Curb-to-Curb Turning Width
40.12 ftTires - Scraper
37.25R35**E3Tires - Tractor
37.25R35**E3Fuel Tank Refill Capacity - Scraper
231 gal (US)
- Tractor Engine
-
Flywheel Power - Tractor/Scraper
570 hp
- Scraper Bowl
-
Scraper Capacity - Heaped
34 yd³
- Transmission
-
Top Speed - Loaded
34.7 mile/h
- Travel Speeds - Runout
-
Transmission Gear - First
3.4 mile/hTransmission Gear - Second
6.2 mile/hTransmission Gear - Third
7.7 mile/hTransmission Gear - Fourth
10.5 mile/hTransmission Gear - Fifth
14.1 mile/hTransmission Gear - Sixth
19.0 mile/hTransmission Gear - Seventh
25.7 mile/hTransmission Gear - Eighth
34.7 mile/hTransmission Gear - Reverse
6.2 mile/h
- Service Refill Capacities
-
Real Wheels (Each)
2.37 gal (US)Crankcase - Tractor
13.7 gal (US)Transmission System
29 gal (US)Cooling System
18.75 gal (US)Fuel Tank
231 gal (US)Hydraulic System
37.5 gal (US)Diesel Exhaust Fluid (DEF)
8 gal (US)
- Service Refill Capacities - Tractor
-
Windshield Washer Reservoir
1.3 gal (US)Differential
40.41 gal (US)
- Service Refill Capacities - Scraper
-
Final Drive - Each
8.71 gal (US)
- Dimensions
-
Width - Overall Machine
155 inWidth - Overall Machine - Ladder Down
159.3 inWidth - Tractor
144.2 inWidth - Rear Tire Centers
96.9 inWidth - Inside of Bowl
134 inWidth - Outside Bowl - Shipping Width
143.1 inHeight - Overall Shipping
153.2 inHeight - Top of Cab
149.8 inFront of Tractor to Front Axle
142.0 inGround Clearance - Tractor
26.1 inAxle to Vertical Hitch Pin
20 inHeight - Scraper Blade Maximum
20 inWheel Base
346.8 inLength - Overall Machine - Standard
596.8 inLength - Maximum (Push-Pull)
655.2 inRear Axle - Rear of Machine
108 inWidth - Outside Rear Tires
143.2 in
- Non Push-Pull
-
Overall Length
49.34 ftOperating Weight - Empty
102750 lb
- Push-Pull
-
Operating Weight - Empty
106430 lbOverall Length - With Bail Down
54.59 ft
- Cab
-
Exterior Sound Level
The exterior sound power level for the standard machine (ISO 6393) is 116 dB(A).ROPS/FOPS
ROPS/FOPS meet “ISO Standards.”
- Safety Criteria Compliance Standards
-
Steering System
ISO 5010:2007Falling Object Protective Structure (FOPS)
ISO 3449:2005 Level IIRollover Protection Structure (ROPS)
ISO 3471:2008 for up to 21 282 kg (46,919 lb)Seat Belt
SAE J386:FEB2006Reverse Alarm
ISO 9533:2010Brakes
ISO 3450:2011
- Implement Cycle Times
-
Bowl Raise
3.5 sBowl Lower
3.5 sApron Raise
4.0 sApron Lower
3.8 sEjector Extend
8.5 sEjector Retract
8.5 sBail Raise
1.5 sBail Lower
2.1 s
Equipment
- Standard Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
POWER TRAIN – TRACTOR
- Cat® C18
- Compression engine brake
- Electric start, 24V
- Air cleaner, dry type with precleaner
- Fan, hydraulic
- Ground level engine shutdown
- Radiator, aluminum unit core, 9 fins per inch
- Guard, crankcase
- Starting aid, ether
- Braking system:
- Primary and secondary, wet disc, hydraulic
- Parking, hydraulic-released, spring-applied
- Throttle lock
- Transmission:
- 8-speed planetary power shift
- ECPC control
- APECS software
- Programmable top gear selection
- Transmission hold
- Differential lock
- Guard, power train
- Standard tire spin reduction
- Ground speed control
- Machine speed limit
- Differential lock protection
POWER TRAIN – SCRAPER
- Braking system:
- Primary and secondary, dry caliper, hydraulic actuated
ELECTRICAL – TRACTOR
- Alternator, 150 Amp
- Batteries (4), 12V, 1,000 CCA, maintenance free, high output
- Electrical system, 24V
- Lighting system:
- Headlights, LED
- Turn signals with hazard function, LED floodlights, (2) cutting edge (1) bowl, halogen side vision (2)
- Starting/charging receptacle
ELECTRICAL – SCRAPER
- Alarm, backup
- Lighting system:
- Brake lights, LED
- Turn signals with hazard function, LED
OPERATOR ENVIRONMENT – TRACTOR
- HVAC system, heat, AC, defrost
- Thermostat control of HVAC system
- Coat hook
- Lunchbox platform with holding strap
- Diagnostic connection (2)
- 12V power ports (2)
- Differential lock (1)
- Dome courtesy light
- Horn, electric
- T-Handle implement control
- Mirror, rearview
- Radio ready
- ROPS/FOPS cab, pressurized
- Keypad switches:
- Throttle lock
- Wipers/washers
- Hazard lights
- Retarding level select
- Work lights on, off
- Information mode on Messenger Display
- Safety tab rocker switches
- Seat belt, static two-piece
- Seat, Cat Advanced Ride Management (ARM), Cat Comfort Series 3, rotates 30 degrees
- Steering wheel, tilt, telescoping, padded
- Windows, right side emergency egress
- Windows, sliding
- Windows, laminated, zipped in
- Windshield wipers, front and rear windows, includes washers
- Door lock
- Messenger Display
- Gauges, warnings include:
- Coolant temperature
- Engine oil temperature
- Hydraulic oil temperature
- Diesel Particulate Filter (DPF) temperature
- Fuel level
- Park brake
- Implement lockout
- Brake system
- Regeneration required
- Throttle lock
- System voltage
- Secondary steering
- Bail down
- Ejector auto
- Differential lock
- Apron float
- Transmission hold
- Cushion hitch
- High beam lights
- Action lamp
- Engine speed, rpm
- Gear selection
- DEF fill levels
FLUIDS
- Extended Life Coolant to –37° C (–34° F)
OTHER STANDARD EQUIPMENT – TRACTOR
- Advanced cushion hitch
- Accumulators (cushion hitch) with Canadian Registration Number (CRN)
- Fast oil change
- Fenders, non-metallic
- Heater, engine coolant 120V
- Rims (2)
- Tow hooks, front
- Vandalism locks
- Heater, engine coolant 120V
- Steering locks
OTHER STANDARD EQUIPMENT – SCRAPER
- Bowl:
- 18.3 m3 (24 yd3), struck
- 26 m3 (34 yd3), heaped
- Vandalism locks
- Rims (2)
- Hydraulic position sensing cylinders (bowl lift and apron)
- Optional Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
STEERING ARRANGEMENTS
- Secondary Steering Arrangement
INTEGRATED TECHNOLOGIES
- Sequence Assist Arrangement with Payload Estimator
- Load Assist
- Cat Grade Control with Load Assist
- Advanced Tire Spin Reduction
OTHER ATTACHMENTS
- Camera arrangement – Work Area Vision System (WAVS)
- Cab beacon
- Air horn
- Air horn and beacon
- Fender, scraper
- Guard, overflow
- Wiring group
- Push Pull
SERVICE INSTRUCTIONS
- Film arrangement – U.S. (ANSI)
- Film arrangement – International (ISO)


