Elevating Scrapers | 623 Wheel Tractor-Scraper

360° Exterior View (HTML)

360° Interior View (HTML)

Details

Flywheel Power - Tractor/Scraper
304 kW (407 hp)

Scraper Capacity - Heaped
23.0 yd³

Top Speed - Loaded
33.5 mile/h

Contact

Contact Foley Equipment and ask for Sales

+1 (316) 943-4211

Request a Quote

Overview

One machine team

Quick loading, high travel speeds and the ability to load and dump on the run yield fast cycle times, allowing Cat Wheel Tractor-Scrapers to consistently deliver high productivity at the lowest cost per ton.

Benefits

Increased

Ergonomic controls and a newly redesigned cab interior provide a more comfortable and efficient working environment all day long

More Elevator Torque

A stronger elevator structure reduces chain wear and improves available torque

Additional

New safety features help operators be more productive and work more efficiently all day long

Features at a Glance

BE MORE PRODUCTIVE

BE MORE PRODUCTIVE

Additional elevator torque.
Improvement in chain life.
Enhanced elevator drive sprocket for reduced chain wear.Improved scissor-style chain tension system for decreased sprocket wear, chain wear, and chain jumping.
Cat C13 engine offers increased power density with a combination of proven electronic, fuel, and air systems.
Use Ground Speed Control to set the desired top speed, and the machine will find the gear that works best for the engine and the transmission, providing a lower fuel burn.
The Machine Speed Limit feature replaces Top Gear Selection.
Advanced Productivity Electronic Control System (APECS) allows the engine and transmission to communicate on a high level. This communication allows the machine to better utilize the power and torque the engine is producing. The net result is moving more material.
Auto-Stall assists in quickly bringing the transmission to an operating temperature at start-up when the machine is working in a cold climate region.
Cat Payload for scrapers is an earthmoving solution for optimal payload and job site efficiency. Cat Payload achieves on-the-go weighing by using bowl lift cylinder pressure during the loaded haul segment. Cat Payload is optimized to be used with Sequence Assist, which provides increased productivity with less operator effort.

WORK IN COMFORT

WORK IN COMFORT

Reduce up to 14 individual operator commands per cycle with
Sequence Assist (optional attachment).
Steer with less effort using the newly designed high-pressure steering
system.
Enjoy interior improvements and a more ergonomic work environment
with a 21% larger cab than the G Series cab.
Intuitive, ergonomic controls keep operators focused on their work.
Maintain desired cab temperature with automatic temperature control
.

DESIGNED FOR SAFETY

DESIGNED FOR SAFETY

Enhance an operator’s awareness of site surroundings with the optional
Work Area Vision System (WAVS).
The seatbelt indicator provides both visual and audible alerts when the seat
belt is not in use.
Ground-level, engine shut-off switch stops all fuel to the engine when
activated and shuts down the machine.
Advanced Cushion Hitch allows the cushion hitch to prevent
end stroke by having the ability to predict end stroke events
and manage the rate of dampening, resulting in reduced hitch maintenance
and improved operator ride in rough conditions.

EASY TO OPERATE

EASY TO OPERATE

The spacious cab features easy, intuitive controls and excellent
visibility. The cab provides a comfortable working environment for
all-day operation.
Cat Advanced Ride Management (ARM) seat suspension reduces
end stroke movement of the load cylinder for a smoother ride.
Engine overspeed protection will automatically engage with no
operator input when the machine is in eighth gear. The machine
will assist in slowing the machine speed by canceling the throttle
command and engaging the engine compression brake.

INTEGRATED CAT TECHNOLOGIES

INTEGRATED CAT TECHNOLOGIES

Monitor, manage, and enhance job site operations.
Hit target grade faster and more accurately with Cat GRADE technologies. Finish jobs in fewer passes and with less operator effort, saving you time and helping to increase profit.
Product Link™ collects machine data that can be viewed online through web and mobile applications (optional attachment).
Access information anytime, anywhere with Vision Link®– use it to make informed decisions that boost productivity, lower costs, simplify maintenance, and improve safety and security on your job site.
Shorten the learning curve for inexperienced operators with Sequence Assist and Load Assist (included with Cat Grade
attachment).

EXECUTE EFFICIENCY

EXECUTE EFFICIENCY

The tractor hydraulic on-demand fan helps assist in lower fuel consumption.
The Cat C13 tractor engine and C9.3 scraper engine meet U.S. EPA
Tier 4 Final and EU Stage V emission standards, or equivalent to
U.S. EPA Tier 2, or equivalent to U.S. EPA Tier 3 and EU Stage IIIA.
Cat Grade Control (optional attachment) intelligently ensures the machine does not cut below grade in a cut area or overfill in the fill area.

Specifications

Full Specifications

Engine: Flywheel Power - Tractor/Scraper
304 kW (407 hp)

Engine Model
Cat® C13

Rated Engine RPM
2000.0 r/min

Flywheel Power - Tractor
407.0 hp

Note
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards, or equivalent to U.S. EPA Tier 2, or equivalent to U.S. EPA Tier 3 and EU Stage IIIA.

Scraper Bowl: Scraper Capacity - Heaped
23.0 yd³

General: Top Speed - Loaded
33.5 mile/h

Overall Width
11.8 ft

Overall Shipping Height
12.37 ft

Scraper Capacity - Heaped
23.0 yd³

Scraper Capacity - Struck
18.8 yd³

Rated Load
25 038 kg (55,200 lb); 25.1 tonnes (27.6 tons)

Width - Cut
10.4 ft

Maximum Depth of Cut
10.3 in

Maximum Depth of Spread
18.3 in

180° Curb-to-Curb Turning Width
38.71 ft

Tires - Tractor Drive
33.25R29**E3

Tires - Scraper
33.25R29**E3

Number of Flights
15

Maximum Floor Opening
4.4 ft

Overall Length
45.18 ft

Elevator Flight Spacing
20.0 in

Transmission: Top Speed - Loaded
33.5 mile/h

Travel Speeds - Runout: Transmission Gear - First
3.1 mile/h

Transmission Gear - Second
5.5 mile/h

Transmission Gear - Third
7.5 mile/h

Transmission Gear - Fourth
10.1 mile/h

Transmission Gear - Fifth
13.6 mile/h

Transmission Gear - Sixth
18.4 mile/h

Transmission Gear - Seventh
24.8 mile/h

Transmission Gear - Eighth
33.5 mile/h

Transmission Gear - Reverse
5.7 mile/h

Service Refill Capacities: Final Drive - Each
5.0 gal (US)

Crankcase
9.7 gal (US)

Transmission System
25.5 gal (US)

Fuel Tank
216.09 gal (US)

Hydraulic System
21.926 gal (US)

Service Refill Capacities - Tractor: Differential
41.7 gal (US)

Dimensions: Height - Overall Shipping
158.9 in

Length - Overall Machine
542.0 in

Axle to Vertical Hitch Pin
17.0 in

Width - Overall Machine
141.1 in

Width - Overall Machine - Ladder Down
149.2 in

Height - Top of Cab
142.6 in

Height - Scraper Blade Maximum
20.5 in

Width - Tractor
133.1 in

Width - Inside of Bowl
120.0 in

Width - Outside Rear Tires
128.9 in

Front of Tractor to Front Axle
122.8 in

Wheel Base
329.5 in

Rear Axle - Rear of Machine
89.7 in

Ground Clearance - Tractor
21.9 in

Width - Rear Tire Centers
90.2 in

Height - Top of Elevator
148.3 in

Cab: Exterior Sound Level
The exterior sound power level for the standard machine (ISO 6395:2008) is 114 dB(A).

ROPS/FOPS
Meets ISO standards

Safety Criteria Compliance Standards: Steering System
ISO 5010:2007

Rollover Protection Structure (ROPS)
ISO 3471:2008 for up to 17 084 kg (37,664 lb)

Falling Object Protective Structure (FOPS)
ISO 3449:2005 Level II

Reverse Alarm
ISO 9533:2010

Brakes
ISO 3450:2011

Seat Belt
SAE J386:JUN1985

Implement Cycle Times: Ejector Extend
6.5 s

Ejector Retract
9.7 s

Bowl Lower
3.5 s

Bowl Raise
3.0 s

Equipment

Standard Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

INTEGRATED TECHNOLOGIES

Sequence Assist, Cat Payload

POWER TRAIN - TRACTOR

Cat C13
Cat engine brake
Electric start, 24 Volt
Air cleaner, dry type with precleaner
Fan, hydraulic
Ground level engine shutdown
Radiator, aluminum unit core, 9 fins per inch
Guard, crankcase
Muffler (only for less or non-regulated regions engine arrangement only)
Starting aid, ether

BRAKING SYSTEM

Primary and secondary, wet disc, hydraulic
Primary and secondary, wet disc, hydraulic
Throttle lock
Parking , hydraulic released, spring applied

TRANSMISSION

Programmable top gear selection
Ground speed control
Machine speed limit
Guard, power train
Differential lock protection
Differential lock
Transmission hold
ECPC control
Standard tire spin reduction
8-speed planetary power shift
APECS software

ELECTRICAL - TRACTOR

Alternator, 150 Amp
Batteries (4), 12V, 1,000 CCA, maintenance free, high output
Electrical system, 24V
Starting/charging receptacle

LIGHTING SYSTEM - TRACTOR

Headlights, halogen
LED Floodlights
Turn Signals with hazard Function
Bowl (1)
Cutting Edge (2)
Halogen sdie vision (2)

ELECTRICAL - SCRAPER

Alarm, backup

LIGHTING SYSTEM - SCRAPER

Trun signals with hazard function, LED
Brake lights, LED

OPERATOR ENVIRONMENT - TRACTOR

HVAC system, heat, AC, defrost
Thermostat control of HVAC system
Coat hook
Lunchbox platform with holding strap
Diagnostic connection (2)
12V power ports (2)
Differential lock (1)
Dome courtesy light
Horn, electric
T-Handle implement control
Mirror, rearview
Radio ready
ROPS/FOPS cab, pressurized
Seat belt, static two-piece
Seat, Cat Advanced Ride Management (ARM), Cat Comfort Series 3, rotates 30 degrees
Steering wheel, tilt, telescoping, padded
Windows, right side emergency egress
Windows, sliding
Windows, laminated, zipped in
Windshield wipers, front and rear windows, includes washers
Door lock
Messenger Display

KEYPAD SWITCHES

Information mode on Messenger Display
Throttle lock
Hazard lights
Retarding level select
Work lights on/off
Wipers/washers

SAFETY TAB ROCKER SWITCHES

Parking Brake
Regeneration control

GAUGES, WARNINGS INCLUDE:

Coolant temperature
Gear selection
Fuel level
Bail down
Cushion hitch
Engine oil temperature
Brake system
System voltage
Regeneration required
High beam lights
Implement lockout
Throttle lock
Ejector auto
Park brake
Action lamp
Hydraulic oil temperature
Differential lock (1)
Secondary steering
Transmission hold
Apron float
Engine speed, rpm

FLUIDS

Extended Life Coolant to -37� C (-34� F)

OTHER STANDARD EQUIPMENT - TRACTOR

Advanced cushion hitch
Accumulators (cushion hitch) with Canadian Registration Number (CRN)
Fast oil change
Fenders, non-metallic
Heater, engine coolant 120V
Rims (2)
Tow pin, front
Vandalism locks
Heater, engine coolant 120V

BOWL

17.6 m³ (23 yd³), heaped
13.5 m� (17.6 yd�), struck

OTHER STANDARD EQUIPMENT - SCRAPER

Vandalism locks
Elevator with 15 flights
Hydraulic position sensing cylinders (bowl lift and apron)

Optional Equipment

NOTE

Standard and optional equipment may vary. Consult your Cat dealer for details.

STEERING ARRANGEMENTS

Secondary Steering Arrangement

INTEGRATED TECHNOLOGIES

Product Link
Cat Grade Control, Cat Payload, Sequence Assist and Load Assist

OTHER ATTACHMENTS

Camera arrangement - WAVS
Steering lock - external
Cab beacon
Air horn
Air horn and beacon
Fender, scraper
Wiring group
Year of manufacture plate

WORK LIGHT ATTACHMENTS

HID work lights

AMBIENT CAPABILITY ARRANGEMENTS

Cooling, high ambient HRC
Extended Life Coolant, -50� C (-58� F)
Cooling, high ambient LRC
Cooling, low ambient LRC

SERVICE INSTRUCTIONS

Film arrangement - U.S. (ANSI)
Film arrangement - International (ISO)

Resources

623 (11A) Wheel Tractor-Scraper - Key Features (Global)

623 (11A) Wheel Tractor-Scraper - Technical Specifications (Global)