Small Dozers

Virtual Product Tour

360° Exterior View (HTML5)

360° Interior View (HTML5)

Details

Engine Model
Cat C3.6

Power - Net
80 HP

Operating Weight
17855 lb

Contact

Foley Equipment Sales

+1 (316) 943-4211

Request a Quote

Overview

Work Looks Better from Here

The Cat® D1 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.

Benefits

Easy to Operate

GRADE with 3D and Slope Assist™ help achieve the best quality grading results, while new technologies make machine operation easier and more efficient.

Lower Total Ownership Cost

with improved fuel economy, long undercarriage life and easy maintenance.

More Performance

with customizable operator settings, improvements in grade control features and optimum machine balance for smooth, fast finish grading.

Features at a Glance

IMPROVED VISIBILITY

The sloped hood provides better visibility to the work in front of the blade as well as the overall job site. Better visibility can equal less operator fatigue and more confidence in your work.

ENHANCED TECHNOLOGY

Cat small dozers include a suite of Operator Assist, Grade, and Cat Command Features that work seamlessly to save time, effort, fuel, machine wear and overall cost.

Stable Blade Lift and Tilt automatically works behind the scenes to allow operators to create smooth surfaces with less effort using accelerometers on the blade and chassis with an advanced algorithm to make minor blade raise and lower movements.
Blade Load Monitor provides real-time feedback of current load vs. target load to fully utilize machine capacity benefiting operators of all skills levels. Automatically compensates for ground conditions. This feature is not available indoors or in areas where a GPS signal is not available.
Low Slip Traction Control prevents excessive track slip to improve machine efficiency and reduce burden on the operator. Feature offers two modes: Normal Mode helps when pushing heavy blade loads by limiting non-productive track slip, recommended for most applications. And Low Slip Mode limits track slip for applications sensitive to slip such as spreading material on top of a liner, select this mode when needed.
AutoCarry™ raises and lowers the blade to maximize pushing capability and prevent excessive track slip when pushing heavy loads. Feature is designed to work in unison with other Operator Assist Features. Not available indoors or in areas where a GPS signal is not available.
Scalable 2D and 3D Cat Grade is an optional feature that makes your job up to 39% faster with up to 82% fewer operator inputs and less rework by maintaining blade angles for better surface quality – even with less experienced operators.
Cat Command remote control is an optional feature that takes you off the machine and away from hazardous conditions, dust, noise or vibration or operating on unstable surfaces. Eliminates risk of injury from climbing on or off the machine. Integrated with dozer systems, Cat Command enables smooth, precise control with access to all machine functions and advanced features (if equipped) for maximum efficiency and productivity.

UP TO 10% IMPROVED FUEL ECONOMY

The D1 features the lowest fuel consumption in this size class with the same great performance you've come to expect. Up to 20% improvement and no performance sacriﬁce when ECO mode is active.

COMFORTABLE WORK SPACE

The spacious and comfortable cab features an optional heated and ventilated seat, along with heated joystick controls to make the operator comfortable no matter what the conditions are outside. The seat height and armrests can be easily adjusted to the operator’s preference.

BIGGER, BETTER DISPLAY WITH CAMERA

This new and improved optional 10 in (254 mm) touchscreen, color display is easy to use, with a great view of machine settings, rearview camera and Slope Indicate/Slope Assist screens. The large reversing camera gives the operator better visibility to the job site.

DURABLE UNDERCARRIAGE

The D1 is available with either a Sealed and Lubricated Track (SALT) or Abrasion undercarriage to best suit your application. The undercarriage has a longer life resulting in less down time. A one piece mainframe/track roller frame design and the large, double reduction planetary final drive allow the machine to push heavy loads.

SUSTAINABILITY

The Cat® C3.6 engine meets U.S. EPA Tier 4 Final, EU Stage V, Japan 2014, and Korea Tier 5 emission standards.
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 20% biodiesel FAME (fatty acid methyl ester) * or 100% renewable diesel, HVO (hydrogenated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
Auto Engine Speed Control helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working.
Cat® Grade with Slope Assist™ helps you avoid costly rework and wasteful fuel burn and greenhouse gas emissions by automating your blade position without a GPS signal.
Cat® Grade with 3D automates blade movements using a GPS signal helping you follow a grade design, reducing fuel burn and greenhouse gas emissions by improving efficiency and accuracy.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
VisionLink® displays the CO2 emissions for monitored assets, calculated by fuel type for the Runtime Fuel Burned each day in a selected date range.
Remote Flash minimizes downtime and maintenance time while keeping your asset running with maximum efficiency. Alerts for machine updates are sent virtually from your Cat dealer and updates can be deployed without a dealer technician needing to be onsite.
Remote Troubleshoot decreases maintenance time and keeps your machine running with maximum efficiency by allowing your Cat dealer to virtually test the machine while working. Once a problem is identified, a technician can fix it the first time, saving time and money.

*Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel.

Specifications

Full Specifications

Engine: Engine Model
Cat C3.6

Power - Net
80 HP

Displacement
220 in³

Net Power - 2,200 rpm - SAE J1349
80 HP

Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
80 HP

Note (1)
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the ﬂywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.

Note (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

Engine: Power Train
Hydrostatic

Weights: Operating Weight
17855 lb

Weights: Operating Weight - LGP
18839 lb

Note (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.

Operating Weight - LGP, 762 mm/30 in
19295 lb

Note (2)
For machine with ripper, add 554 kg (1,222 lb).

Cab: FOPS
ISO 3449:2005 Level II

ROPS
ISO 3471:2008

Transmission: Drive Pumps
1

Maximum Travel Speed - Reverse
6.2 mile/h

Relief Valve Settings
7033 psi

Maximum Travel Speed - Forward
5.6 mile/h

Track Motors
2

Undercarriage: Length - Track on Ground - LGP, 762 mm (30 in)
89 in

Length - Track on Ground - LGP
89 in

Track Gauge - LGP
68 in

Shoe Width - LGP, 762 mm (30 in)
30 in

Track Gauge - LGP, 762 mm (30 in)
73 in

Shoe Width - LGP
25 in

Track Gauge
59 in

Shoe Width - Standard
16 in

Ground Pressure - LGP
4.3 psi

Ground Pressure - LGP, 762 mm (30 in)
3.7 psi

Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
43

Number of Rollers - Each Side
6

Undercarriage: Length of Track on Ground
89 in

Number of Shoes - Each Side - Abrasion Undercarriage
38

Ground Pressure
6.45 psi

Service Refill Capacities: Final Drive - Each - LGP
2.6 gal (US)

Cooling System
4.2 gal (US)

Diesel Exhaust Fluid (DEF) Tank
4.9 gal (US)

Transmission - Hydraulic Tank
23.8 gal (US)

Crankcase - With Filter
2.8 gal (US)

Fuel Tank
51.5 gal (US)

Service Refill Capacities: Final Drives - Each Side
2.6 gal (US)

Hydraulic Controls: Pump Output
17.2 gal/min

Relief Valve Settings
2988 psi

Ripper: Type
Parallelogram

Number of Shanks
3

Height
6.5 in

Weight
1222 lb

Maximum Ground Clearance Under Tip
17.6 in

Maximum Digging Depth
13.3 in

Overall Width
67.3 in

Maximum Reach - Ground Line
30.2 in

Air Conditioning System: Air Conditioning
The air conditioning system on this machine contains the ﬂuorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Dimensions: BLADE: Blade Capacity (SAE) - LGP
2.17 yd³

BLADE: Blade Lift Height - LGP
28.7 in

BLADE: Maximum Tilt - LGP
17.2 in

BLADE: Blade Width - LGP
124 in

Ground Clearance - LGP
13 in

BLADE: Blade Width at Maximum Angle - LGP
113.1 in

BLADE: Digging Depth - LGP
23 in

Track Gauge - LGP
67.9 in

Ground Clearance - LGP, 762 mm (30 in)
13 in

BLADE: Blade Height - LGP
33.8 in

Overall Length - With Blade - LGP, 762 mm (30 in)
167.8 in

Track Gauge - LGP, 762 mm (30 in)
73 in

BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52° to 58°

BLADE: Maximum Angle (either side) - LGP
25°

Overall Length - With Blade - LGP
167.8 in

Note
*Abrasion Undercarriage

Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)
129.6 in

Width of Dozer (standard shoes, no blade) - Standard
74.8 in

Length of Basic Dozer (without blade) - Standard
129.6 in

Length of Basic Dozer (without blade) - LGP
129.6 in

Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)
94.9 in

Dozer Height - LGP
108.9 in

Width of Dozer (standard shoes, no blade) - LGP
92.9 in

Dozer Height - LGP, 762 mm (30 in)
108.9 in

Dozer Height - Standard
108.9 in

Dimensions: BLADE: Blade Width at Maximum Angle - Standard
95.2 in

BLADE: Digging Depth - Standard
23.2 in

BLADE: Blade Width - Standard
104.2 in

BLADE: Blade Lift Height - Standard
28.7 in

Ground Clearance - Standard
13 in

BLADE: Blade Cutting Edge Angle, Adjustable - Standard
52° to 58°

BLADE: Maximum Angle (either side) - Standard
25°

BLADE: Maximum Tilt - Standard
14.5 in

BLADE: Blade Capacity (SAE) - Standard
1.99 yd³

Track Gauge - Standard
58.9 in

BLADE: Blade Height - Standard
35.8 in

Overall Length - With Blade - Standard
168 in

Note
With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)

Retrieval Winch: Weight
1747 lb

Maximum Line Pull - Full Drum
79 ft/min

Drum Capacity - Recommended Cable
277 ft

Maximum Line Pull - Bare Drum
50 ft/min

Drum Capacity - Optional Cable
195 ft

Maximum Line Speed - Full Drum
20350 lb

Control
Hydraulic

Maximum Line Speed - Bare Drum
32150 lb

Rope Diameter - Optional
0.75 in

Winch Drive
Hydraulic

Rope Diameter - Recommended
0.63 in

Speed
Variable

Drum Diameter
8 in

Drum Width
9.65 in

Throat Clearance
5.6 in

Winch Length
35.63 in

Overall width
27.91 in

High Performance Winch: Weight
1345 lb

Drum diameter
10 in

Winch drive
Hydrostatic

Winch length
27.76 in

Maximum line pull – bare drum
40000 lb

Maximum line speed – full drum
207 ft/min

Drum width
10.8 in

Drum capacity – optional
256 ft

Rope diameter – recommended
0.63 in

Maximum line pull – full drum
25000 lb

Rope diameter – optional
0.75 in

Speed
Variable

Maximum line speed – bare drum
131 ft/min

Throat clearance
6.75 in

Drum capacity – recommended cable
371 ft

Overall width
29.2 in

Control
Hydraulic

Equipment

Standard Equipment

POWER TRAIN

Air cleaner with precleaner, automatic dust ejection and underhood intake
Aluminum bar plate cooling system (radiator, power train)
Automatic traction control
Cat® C3.6 diesel engine
Drive, auxiliary
Dual path, closed loop, hydrostatic transmission
Electric fuel pump
Fuel/water separator
Turbocharged aftercooled

ELECTRICAL

Alarm, backup
Alternator, 150 amp, heavy duty
Batteries, heavy duty, maintenance free, 1,000 CCA
Diagnostic connector
Four integrated front halogen lights, two rear halogen
Horn, electric
Starter, electric, 12 V, heavy duty

UNDERCARRIAGE

SALT undercarriage (43 section)
Carrier rollers
Guards, front/rear guiding
Six roller track frame
Track adjusters, hydraulic
Track rollers, lifetime lubricated

HYDRAULIC

Hydraulic pump and oil
Single lever, three function control
Three valve hydraulics

CAT TECHNOLOGY

Low Slip Traction Control (included with ARO and Cat Grade 3D)
Slope Indicate
Stable Blade Lift and Tilt (included with ARO and Cat Grade 3D)
Compatibility with radios and base stations from Trimble, Topcon, and Leica
Capability to install 3D grade systems from Trimble, Topcon, and Leica

ATTACHMENTS

Rigid drawbar
Front pull device

OPERATOR ENVIRONMENT

Armrests, adjustable
Coat hook
Controls, seat mounted, fore/aft adjustment
Cup holders
Eco Mode
Electronic Monitoring system with gauge:
– Chassis slope indication
– Diesel exhaust fluid (DEF)
– Engine coolant temperature
– Fuel level
– Hydraulic oil temperature
Electronic security system
Engine air cleaner service indicator
Engine RPM and gear display
Floor mat, rubber, heavy duty
Foot pads, dash
Hour meter, electronic
Independent forward/reverse speed settings
Mirror, rearview, inside
Power port, 12 volt
ROPS/FOPS canopy
Seat, air suspended, cloth or vinyl
Seatbelt, hi-vis retractable 76 mm (3")
Seatbelt buckling indicator/reminder
Single pedal combining decel and brake functions
Speed recall
Storage compartment
Throttle switch, rotary
Travel speed limiter, electronic

Optional Equipment