Center-Pivot Backhoe Loaders

Details

Net Power - SAE J1349
92 HP

Dig Depth - Standard
14 ft

Operating Weight - Maximum
24251 lb

Contact

Foley Equipment Sales

+1 (316) 943-4211

Request a Quote

Overview

More Comfort – More Performance – More Versatility

The Cat^® 420 XE Backhoe Loader delivers exceptional performance, increased fuel efficiency, superior hydraulic system, versatility and an updated operator station.

Benefits

OPERATOR EXPERIENCE

• Seat Mounted Controls improve Operator Comfort & Ergonomics • NEW LCD Operator Display with Touchscreen Control Improves User Interface • Effortlessly Shift Gears with the Powershift Transmission • SAHR Parking Brake for Peace of Mind.

UP TO 15% MORE PERFORMANCE

• NEW Cat® C3.6 provides 10%+ more Fuel Efficiency Selectable Parallel Lift ensures Material Retention when Loading • Up to 15% more Boom Lift Performance • Operator Control Modes provide More Response, More Speed, More Torque • Electronic Loader Controls enable Programmable Loader Kickout & Return to Dig

IMPROVED MACHINE UTILIZATION

IT Loader Coupler • Change Attachments for various applications with a touch of a button > Pallet Forks > Material Handling Arms > Snow Pushes

LESS CO2 EMISSIONS

The 420 XE emits up to 10% less CO2 than the previous 420F2 IT.

Features at a Glance

Ergonomic Operator Station: Adjustable Seat Mounted Controls improve ergonomics by increasing operator comfort and legroom. Operators have Loader and Backhoe Controls in the palm of their hands, whether they are facing the Loader, the Backhoe, or sitting off set for better visibility. The new Spring Applied Hydraulically Released (SAHR) Parking Brake is controlled by simply pressing a button.

Load Sensing Hydraulics: The Cat Backhoe Loader’s load sensing piston pump provides full hydraulic lifting and digging forces at any engine speed. Variable flow pump matches hydraulic power to work demands.

Machine Performance: The Cat C3.6 engine delivers solid performance and meets U.S. EPA Tier 4 Final/EU Stage V emission standards by utilizing Selective Catalytic Reduction technology with a Diesel Oxidation Catalyst. The system allows the operator to disconnect the machine, even while the diesel exhaust fluid is being purged from the system.

Machine Versatility: The all new Integrated Tool Carrier (IT Coupler) for Single Tilt Loader Arm configurations are available from the factory or for simple field installation. The Cat Backhoe Loader with Integrated Tool Carrier (IT Coupler) will be the most versatile machine on the job site providing quick connection to a variety of Cat Attachments.

Cat Attachments: A large portfolio of Backhoe Loader Attachments, including but not limited to, Quick Couplers, Thumbs, assorted Buckets, and Brooms are available from the factory or for field installation. Cat Backhoe Loaders will be “Dirt Ready” upon delivery.

Powershift Transmission: A Four Speed Powershift Transmission is standard to make shifting gears smooth and as simple as twisting the Powershuttle Lever.

Lift Performance: The redesigned boom cylinder increases lift performance by 15%.

Sustainability

The Cat® C3.6 engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Save fuel and reduce your greenhouse gas emissions with efficiency features such as operator control modes (420 XE/440/450/432/444 models only) selectable through the display and with fuel management modes.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
Auto Idle helps reduce unnecessary fuel burn and greenhouse gas emissions by allowing the engine to automatically go into idle mode when the machine is not working. Available on all models with pilot or E/H controls.

Specifications

Full Specifications

Engine: Net Power - SAE J1349
92 HP

Displacement
220 in³

Engine Model
C3.6 74.5 kW (100 hp) Electronic Turbo Intercooled

Net Power Rating at 2,200 rpm - ISO 9249
91 HP

Power Rating Conditions - No De-Rating Required Up To
10000 ft

Net Torque Rise - 1,400 rpm - SAE J1349
47%

Ratings at 2,200 rpm - Gross Power SAE J1995
102 HP

Ratings at 2,200 rpm - Gross Power ISO 14396
100 HP

Net Power Rating at 2,200 rpm - SAE J1349
92 HP

Net Torque Rise - 1,400 rpm - SAE J1349
322 ft-lb

Emissions
Engine meets Tier 4 Final/Stage V emission standards.

Net Peak Power - 1,800 rpm - ISO 9249
105 HP

Dimensions - Bore
3.86 in

Dimensions - Stroke
4.72 in

Net Peak Power Rating @ 1,800 rpm - SAE J1349
105 HP

Weights: Operating Weight - Maximum
24251 lb

Cab - ROPS/FOPS
320 lb

Ride Control
33 lb

Air Conditioning
99 lb

Note
Machine configuration: standard stick hoe, OROPS canopy, AWD power shift transmission, 0.96 m³ (1.25 yd³) GP (General Purpose) loader bucket, 610 mm (24 in) standard duty hoe bucket, front 340/80-18 and rear 500/70-24 tires, 240 kg (530 lb) counterweight, 80 kg (176 lb) operator, full fuel tank.

MP Bucket (0.96 m3/1.25 yd3) - With Fold-Over Forks
2017 lb

Operating Weight - Maximum - ROPS Capacity
24251 lb

MP Bucket (0.96 m3/1.25 yd3) - Without Fold-Over Forks
1642 lb

Power-Shift Transmission
STD

Extendible Stick (excludes ft. counterweight)
595 lb

Counterweights, base - Maximum
1014 lb

Counterweights, base
256 lb

Loader QC
540 lb

All-Wheel Drive
STD

Operating Weight (estimated)
17271 lb

Counterweights, base - Stackable, one
529 lb

Backhoe: Dig Depth - Standard
14 ft

Transmission: Power-Shift Transmission with LTC - Optional - Forward - 2nd
5.8 mile/h

Power-Shift Transmission with LTC - Optional - Forward - 6th LTC*
25 mile/h

Power-Shift Transmission with LTC - Optional - Forward - 5th LTC
18 mile/h

Power Shift Transmission - Standard - Forward - 3rd
12 mile/h

Power Shift Transmission - Standard - Reverse - 2nd
7.7 mile/h

Power-Shift Transmission with LTC - Optional - Reverse - 3rd
17 mile/h

Power-Shift Transmission - Optional - Forward - 2nd
5.8 mile/h

Power-Shift Transmission - Optional - Reverse - 1st
3.7 mile/h

Power-Shift Transmission with LTC - Optional - Forward - 4th
12 mile/h

Power Shift Transmission - Standard - Forward - 1st
3.7 mile/h

Power-Shift Transmission with LTC - Optional - Forward - 5th
17 mile/h

Power-Shift Transmission - Optional - Reverse - 2nd
7.7 mile/h

Power-Shift Transmission with LTC - Optional - Reverse - 1st
3.7 mile/h

Power-Shift Transmission with LTC - Optional - Forward - 1st
3.7 mile/h

Power-Shift Transmission - Optional - Reverse - 3rd
17 mile/h

Power Shift Transmission - Standard - Reverse - 1st
3.7 mile/h

Power-Shift Transmission - Optional - Forward - 3rd
8 mile/h

Power Shift Transmission - Standard - Reverse - 3rd
17 mile/h

Power-Shift Transmission with LTC - Optional - Forward - 6th
25 mile/h

Power Shift Transmission - Standard - Forward - 4th
25 mile/h

Power Shift Transmission - Standard - Forward - 2nd
5.8 mile/h

Power-Shift Transmission with LTC - Optional - Forward - 3rd
8 mile/h

Power-Shift Transmission with LTC - Optional - Reverse - 2nd
7.7 mile/h

Power-Shift Transmission - Optional - Forward - 6th
25 mile/h

Power-Shift Transmission - Optional - Forward - 4th
12 mile/h

Power-Shift Transmission - Optional - Forward - 5th
17 mile/h

Power-Shift Transmission - Optional - Forward -1st
3.7 mile/h

Note (2)
*Limited by engine speed to 40 km/h (25 mph).

Note (1)
Travel speeds of two wheel drive backhoe loader at full throttle, when equipped with 500/70-24 rear tires.

Axle Ratings: Rear Axle - Dynamic
22046 lb

Front Axle, AWD - Dynamic
19841 lb

Front Axle, AWD - Static
51808 lb

Rear Axle - Static
58422 lb

Hydraulic System: Pump Type
Variable-flow, Axial Piston

System Pressure - Loader
3626 psi

Pump Capacity at 2,200 rpm
49.4 gal/min

System Pressure - Backhoe
3626 psi

Type
Closed Center

Steering: Bore
2.6 in

Turning Circle - (inner wheel not braked) - Outside Front Wheels
26.92 ft

Turning Circle - (inner wheel not braked) - Outside Widest Loader Bucket
35.25 ft

Power Steering
Hydrostatic

Rod Diameter
1.6 in

Type
Front Wheel Steering

Stroke
4.2 in

Axle Oscillation
11°

Cylinder
One Double-Acting

Service Refill Capacities: Fuel Tank
42.3 gal (US)

Engine Oil - With Filter
2.4 gal (US)

Hydraulic Tank
11.1 gal (US)

Hydraulic System
25.1 gal (US)

Cooling System with Air Conditioning
4.8 gal (US)

Rear Axle
4.2 gal (US)

Diesel Exhaust Fluid (DEF)
5 gal (US)

Rear Axle - Planetaries
0.4 gal (US)

Transmission - Power Shift - AWD
5 gal (US)

Transmission - Power Shuttle - AWD
4.8 gal (US)

Front Axle (AWD) - Planetaries
0.2 gal (US)

Front Axle (AWD)
2.9 gal (US)

Equipment

Standard Equipment

STANDARD EQUIPMENT

Adjustable auxiliary controls, backhoe loader
Air cleaner
Alarm, back-up
Audible system fault alarm
Automatic Engine Speed Control (AESC)
Battery, maintenance-free, 850 CCA
Battery disconnect switch
Boom transport lock
Brace, lift cylinder
Brake, parking, Spring Applied Hydraulically Released (SAHR)
Brakes, hydraulically boosted, oil disc, dual pedals, interlocking
Bucket level indicator
Canopy, ROPS/FOPS
Cat cushion swing system
Coat restraint
Coolant/antifreeze, extended life
Dome light (cab only)
Diagnostic port for engine, machine and gauge cluster Electronic Control Modules
Differential lock, loader joystick
Drink holders, two
Engine, Cat C3.6 (Direct Injection Turbocharged), meets Tier 4 Final/Stage V emission standards, Selective Catalytic Reduction, Diesel Oxidation Catalyst (DOC)
Engine enclosure, sound suppression, removable side panels
Face seals, O-ring
Fan, suction and guard
Fast reversing shuttle, all gears
Fenders, rear
Filters, spin-on: fuel, engine oil, transmission oil, water separator
Filters, bowl and cartridge: hydraulic fluid
Flashing hazards/signal lights
Floor mat
Four wheel drive
Four wheel drive shaft guard
Fuel tank, fully enclosed
Fully hinged front grill for cooling package cleaning access
Gauge cluster: coolant temperature, fuel level, torque converter temperature, DEF level
Ground level fuel fill and DEF fill
Halogen lights, working (2 front, 2 rear)
High ambient cooling package
Hood lock, inside cab
Hydraulic Lock Out, loader, backhoe, auxiliary hydraulics
Hydraulic hose, XT™
Hydraulic oil cooler
Hydraulic oil level sight gauge
Hydraulic valves, loader 2 function
Hydraulic valves, backhoe 4 function
Hydraulics, load sensing with variable displacement piston pump
Indicator lights: wait to start, water in fuel, engine warning, warning lamp, emissions module malfunction, low battery/charging system warning, high hydraulic oil temperature: LCD warnings: engine oil pressure, machine locked, service due, air filter blocked, high coolant temperature, auto idle shutdown, high torque converter temperature, hydraulic filter bypass
Instrument panel lights
Key start/stop system
LCD operator display with soft key controls: engine speed, hour meter, gear/direction, battery voltage, hydraulic oil temperature, torque converter temperature, coolant temperature, trip totals (fuel and hours), lifetime totals (fuel and hours), operator settings (units, brightness, programmable hoe auxiliary flow), service mode diagnostics, maintenance intervals, ECM/system info
Loader, EH Parallel Lift
Loader, Programmable Kick Out
Loader, Programmable Return To Dig
Loader, single tilt
Mirror, interior, rearview
One-touch low idle
Open circuit breather
Pattern changer, in cab
Power receptacle, 12 volt, 2 internal, 1 external
Power receptacle, 5 volt USB, 1 internal
Power steering, hydrostatic
Product Link™, satellite, network manager
Product Link, cellular, network manager
Seat belt, retractable, 51 mm (2 in)
Seat mounted joystick controls: backhoe and loader, EH operated, excavator style with pattern changer
Socket, two roof
Stabilizers, EH Control, Auto-UP
Stabilizer shoes, street
Steering knob
Seat, air suspension, vinyl cover, with armrest
Starting system, glow plugs
Steering column, tilting, telescopic
Storage compartment, lockable
Storage tray
Stop and tail lights
Swing transport lock
Tires
Toolbox, external, lockable
Torque converter
Throttle, hand and foot, electronic
Transmission, 4 speed, powershift
Transmission neutralizer switch
Transport tie-downs
Vandalism locks, four
Warning horn, electric

Optional Equipment

OPTIONAL EQUIPMENT

Auxiliary hydraulics, loader, adjustable flow
Auxiliary hydraulics, rear, adjustable flow
Battery, additional, 850 CCA
Cab, deluxe
Cold weather fuel (–30° C/–22° F)
Cold weather package, including additional battery, engine block heater, radiator antifreeze, cold weather fuel (–30° C/–22° F) and mounting for an ether bottle
Counterweights, 115 kg (255 lb), 240 kg (530 lb) or 460 kg (1,015 lb)
Fenders, front with integral steps
Guard, boom protection plate
Guard, stabilizer, rock
Hydraulic valves, loader with auxiliary roller thumb control (3rd valve for MP or Quick Coupler)
Hydraulic valves, backhoe (5th and 6th function)
Hydraulic lines, combined function auxiliary
LED lights, working (2 front, 2 rear)
Quick Coupler, hydraulic, dual lock
Quick Coupler, manual, dual lock
Quick Coupler, manual, pin lock
Radio and CD player, Bluetooth®
Ride Control
Rotating beacon, magnetic mount
Seat, air suspension, fabric with armrest
Seat, air suspension, fabric with armrest, heated
Seat belt, retractable, 75 mm (3 in)
Security system, Bluetooth
Security system, operator display
Side mirrors, cab, external
Single Tilt Loader Coupler, Integrated Tool Carrier (IT) Interface
Stabilizer pads, reversible
Stick, extendible
Touch screen LCD Display: engine speed, hour meter, gear/direction, battery voltage, hydraulic oil temperature, torque converter temperature, coolant temperature, trip totals (fuel and hours), lifetime totals (fuel and hours), operator settings (units, brightness, programmable hoe auxiliary flow), service mode diagnostics, maintenance intervals, ECM/system info
Transmission, AutoShift with lock-up torque converter, 6 speed
Vandalism protection, gauge cover
Work Tool Attachments such as buckets, forks, material handling arms, augers, hammers, brooms, cold planers and vibratory plate compactors. See your Cat dealer for more information.