Small Wheel Loaders

360° Exterior View (HTML5)

360° Interior View (HTML5)

Details

Maximum Gross Power
168 HP

Operating Weight
31382 lb

Bucket Capacities
2.1-5.0 m³ (2.7-6.5 yd³)

Contact

Foley Equipment Sales

+1 (316) 943-4211

Request a Quote

Overview

Configured for Success

The Cat® 930M Ag Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A power boost in Range 1 for silage work maximizes productivity, while a boost in Range 4 gets you to the farm or field faster. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.

Benefits

Engine Speed

Lower engine speed lowers fuel burn.

Control

More refined control with consistent and predictable stopping distances.

Sound Level

When running at 1,600 RPM in Standard Mode.

Features at a Glance

Efficiently Powerful: Experience hybrid-like fuel efficiency with an intelligent hydrostatic power train and industry leading fuel savings through a lower maximum engine speed of just 1,600 rpm in Standard Mode. Power when you need it with Caterpillar's exclusive Power‑by-Range technology that increases power in Range 4 for improved speed on grade. For your toughest and most demanding farm applications a new Performance Mode will allow you to boost the power and hydraulic speed in all Ranges to get the job done even quicker. Meets U.S. EPA Tier 4 Final emission standards with a Cat® C7.1 engine that is designed to manage itself so you can concentrate on your work.

Work Made Easy: Move more with Caterpillar's patented quick loading Performance Series buckets and High Lift optimized Z-bar linkage that combines the digging efficiency of a traditional Z-bar with tool carrier capabilities. The parallel lift and high tilt forces throughout the working range allow you to safely and confidently handle loads from bales to silage with precise control. Multi-function work has never been easier with dedicated pumps for each system and a flow sharing implement valve governed by an intelligent power management system. Simultaneously lift, steer and drive without compromise. A 20% boost in hydraulic speeds on the Ag Handler helps you finish the day on time.

Enjoy All Day Comfort: Have a seat in the 930M Ag Handler and enjoy automatic temperature control, class leading sound levels, excellent all around visibility and low-effort joystick controls that move with you on a fully adjustable seat suspension. A large spacious operator environment combined with Caterpillar's exclusive hydraulic cylinder damping and smooth predictable controls make this the most comfortable seat on the farm.

Customize Your Experience: Fine tune machine performance with adjustments at your fingertips through the soft touch buttons and optional secondary touch screen display. Quickly set auxiliary flow to optimize grapple or silage defacer speed, enable auto reversing fan to breathe clean in dusty environments, toggle over to fine mode for improved control when bale stacking, program linkage kick-out positions for easy feed wagon loading, adjust wheel torque to match underfoot conditions when cleaning corrals and customize ride control activation speed for a smooth loaded carry run. The 930M Ag Handler is ready for the challenge on your farm!

Sustainability

The Cat® C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 5 emission standards.
Engine Idle Management System (EIMS) helps maximize fuel efficiency and reduce greenhouse gas emissions while maintaining machine performance.
Engine Idle Shutdown Timer reduces fuel burn, greenhouse gas emissions and unnecessary idle time by shutting down the machine after a pre-set idling period.
Performance Series Buckets have rounded side boards, a longer floor and open angle to carry more and load quicker so each pass is the most efficient.
Rimpull Control is a quick way to adjust the torque to the tires for less slipping and tire wear.
Cat® Production Measurement provides real-time payload weighing which help you maximize productivity, reduce fuel burn and greenhouse gas emissions, all while improving job site efficiency and lowering costs.
Extended maintenance intervals not only reduce downtime but decrease the amount of fluid and filters that are replaced over the life of the machine.
Power on Demand, transparent to the operator, provides full-time efficiency and power when you need it.
Tire Pressure Monitoring provides real-time tire pressure information to the operator to help increase tire wear and achieve better fuel efficiency and reduced greenhouse gas emissions.
Intelligent Hystat Transmission helps improves control and reduces fuel consumption and greenhouse gas emissions in load and carry applications.
Variable Displacement Pumps match power to load as application requirements change.

Specifications

Full Specifications

Engine: Maximum Gross Power
168 HP

Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
601 ft·lbf

Stroke - Performance Power Mode: Range 1-4
5.3 in

Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800 r/min

Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)
797 N·m

Displacement (Performance Power Mode: Speed Range 1-4)
428 in³

Emissions
Engine meets U.S. EPA Tier 4 Final emission standards.

Engine Model
Cat® C7.1

Note (4)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.

Maximum Rated Gross Power - ISO 14396
168 HP

Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
170 HP

Note (2)
**Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.

Note (3)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.

Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
168 HP

Note (1)
*The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.

Bore (Standard Power Mode: Range 1-4)
4.1 in

Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
156 HP

Stroke (Standard Power Mode: Range 1-3**)
5.3 in

Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
156 HP

Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3**)
1600 r/min

Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
166 HP

Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
164 HP

Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
158 HP

Bore (Standard Power Mode: Range 1-3**)
4.1 in

Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4)
587 ft·lbf

Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3**)
795 N·m

Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3**)
776 N·m

Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
163 HP

Displacement (Standard Power Mode: Range 1-3**)
428 in³

Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3**)
160 HP

Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3**)
162 HP

Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3**)
573 ft·lbf

Maximum Rated Gross Power - ISO 14396 (metric)
170 mhp

Buckets: Bucket Capacities
2.1-5.0 m³ (2.7-6.5 yd³)

Bucket Capacities - Light Material
3.1-5.0 m³ (4.0-6.5 yd³)

Weights: Operating Weight
31382 lb

Cab: ROPS
ISO 3471:2008

FOPS
ISO 3449:2005 Level II

Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*
101 dB(A)

Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*
68 dB(A)

Note (1)
*The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.

Steering: Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.5 turns

Maximum Flow - Steering Pump
34 gal/min

Steering Cylinder, Double Acting - Bore Diameter
2.8 in

Steering Cylinder, Double Acting - Stroke
17.2 in

Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.

Maximum Working Pressure - Steering Pump
3500 psi

Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8 s

Steering Articulation Angle - Each Direction
40°

Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4 s

Steering Cylinder, Double Acting - Rod Diameter
1.6 in

Loader Hydraulic System: Relief Pressure - Tilt Cylinder
4351 psi

Cycle Times - 1,600 rpm - Standard: Total Cycle Time
10.1 s

Maximum Flow - Implement Pump
50 gal/min

Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gal/min

Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height)
1.5 s

Note
*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display.

Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time
9.3 s

Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level)
2.7 s

Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift)
5.1 s

Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level)
2.7 s

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
4061 psi

Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height)
1.7 s

Maximum Working Pressure - Implement Pump
4061 psi

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4351 psi

Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.

Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift)
5.7 s

Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50 gal/min

Lift Cylinder: Standard Lift Linkage - Bore Diameter
4.3 in

Tilt Cylinder: Standard Lift Linkage - Stroke
21.9 in

Tilt Cylinder: Standard Lift Linkage - Rod Diameter
2.8 in

Lift Cylinder: Standard Lift Linkage - Rod Diameter
2.4 in

Tilt Cylinder: Standard Lift Linkage - Bore Diameter
5.1 in

Lift Cylinder: Standard Lift Linkage - Stroke
28.7 in

Tires: Standard Size
20.5 R25, radial (L-3)

Note (2)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Note (1)
Other tire choices are available. Contact your Cat dealer for details.

Other Choices Include
20.5 R25, Radial (L-2); 620/75 R26 MegaX, 750/65 R26 MegaX

Service Refill Capacities: Transmission - Gear Box
2.2 gal (US)

Cooling System
7.9 gal (US)

Diesel Exhaust Fluid (DEF) Tank
5 gal (US)

Fuel Tank
51.5 gal (US)

Axles - Rear
6.6 gal (US)

Hydraulic System - Including Tank
43.6 gal (US)

Engine Crankcase
5.3 gal (US)

Axles - Front
6.9 gal (US)

Hydraulic Tank
23.8 gal (US)

Power Train: Note
*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph).

Rear Axle
Oscillating

Note (2)
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.

Front Axle
Fixed

Front Axle - Traction Aid*
Locking differential standard

Rear Axle - Oscillation Angle by Tire Size - 20.5 R25
± 10.5 degrees

Brakes - Service
Inboard wet disc

Rear Axle - Traction Aid
Limited slip differential optional

Brakes - Parking
Spring applied hydraulically released

Rear Axle - Oscillation Angle by Tire Size - 750/65, 620/65
± 7 degrees

Transmission: Forward - Range 2
8 mile/h

Forward - Range 1*
1-13 km/h (0.6-8 mph)

Reverse - Range 4
25 mile/h

Reverse - Range 2
8 mile/h

Note
Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintained at 13 km/h (8 mph) in Range 1 for a quick reverse.

Forward - Range 3
17 mile/h

Forward - Range 4
25 mile/h

Reverse - Range 3
17 mile/h

Reverse - Range 1*
8 mile/h

Operating Specifications: Full Turn Tip Load
19424 lb

Air Conditioning System: Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Axles: Rear
Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)

Front
Fixed; Locking differential (standard)

Dimensions with Bucket - Standard Lift: Height - Ground Clearance**
1.3 ft

Rack Angle at Carry
43 °

Departure Angle
33 °

Length - Wheel Base
9.8 ft

Length - Rear Axle to Bumper
6.5 ft

Turning Radius - Over Bucket
19.5 ft

Carry Height - Bucket Pin
1.3 ft

Width - Over Tires
8.3 ft

Note (2)
**Vary with tire.

Dig Depth**
3.9 in

Turning Radius - Outside of Tires
17.7 ft

Clearance - Level Bucket**
11.75 ft

Clearance - Bucket at 45°*
9.1 ft

Rack Angle at Full Lift
54 °

Height - Overall**
17.1 ft

Width - Bucket
8.4 ft

Height - Ground to Axle Center**
2.25 ft

Height - Bucket Pin**
12.8 ft

Operating Weight
31125 lb

Width - Tread Center
6.3 ft

Turning Radius - Inside of Tires
9.4 ft

Reach - Bucket at 45°*
3.6 ft

Length - Overall*
24.9 ft

Clearance - Load over Height**
10.9 ft

Length - Hitch to Front Axle
4.9 ft

Height - Ground to Beacon**
12.2 ft

Articulation Angle
40 °

Height - Ground to Cab**
10.9 ft

Note (3)
Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.

Note (1)
*Vary with bucket.

Dump Angle at Full Lift
48 °

Dimensions with Bucket - High Lift: Length - Rear Axle to Bumper
6.5 ft

Departure Angle
33 °

Height - Overall**
18.7 ft

Reach - Bucket at 45°*
4.4 ft

Dump Angle at Full Lift
48 °

Width - Bucket
8.4 ft

Length - Wheel Base
9.8 ft

Width - Tread Center
6.3 ft

Length - Hitch to Front Axle
4.9 ft

Height - Ground to Axle Center**
2.25 ft

Note (1)
*Vary with bucket.

Clearance - Bucket at 45°*
10.7 ft

Height - Bucket Pin**
14.4 ft

Height - Ground to Beacon**
12.2 ft

Carry Height - Bucket Pin
1.9 ft

Clearance - Load over Height**
11.6 ft

Turning Radius - Outside of Tires
17.7 ft

Turning Radius - Over Bucket
20.6 ft

Rack Angle at Full Lift
51 °

Rack Angle at Carry
47 °

Length - Overall*
27 ft

Note (2)
**Vary with tire.

Height - Ground to Cab**
10.9 ft

Turning Radius - Inside of Tires
9.4 ft

Clearance - Level Bucket**
13.4 ft

Width - Over Tires
8.3 ft

Note (3)
Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.

Dig Depth**
5.3 in

Articulation Angle
40 °

Operating Weight
31441 lb

Height - Ground Clearance**
1.3 ft

Sustainability: Recyclability
94%

Equipment

Standard Equipment

POWER TRAIN

Auto idle shut down feature
Cat C7.1 engine
- Power modes (Standard and Performance)
- Power by range (High Power in Range 4)
- Turbocharged and aftercooled
- Diesel particulate filter (Fit for Life)
Coded start (requires secondary display)
Differential lock in front axle
Enclosed wet disc full hydraulic brakes
Oil sampling ports
Hydraulically driven demand cooling fan
Hydrostatic transmission with electronic control
- Operator modes (Default, TC, Hystat™, and Ice)
- Directional Shift Aggressiveness (fast, medium, slow)
- Rimpull control, adjust wheel torque
- Creeper control, adjust ground speed
Axle Duo-Cone™ seal guards
Parking brake, electric
Single plane cooling package wide six fins per inch density
Throttle lock and max speed limiter

HYDRAULICS

Automatic lift lower and tilt kickouts, adjustable in-cab
Bucket and fork modes, adjustable in-cab
Cylinder damping at kickout and mechanical end stops
Fine mode control (fast, medium, slow)
Hydraulic response setting (fast, medium, slow)
Load sensing hydraulics and steering
Load sensing hydraulics and steering

ELECTRICAL

Alternator, 115 amp, heavy duty
Batteries, 1,000 CCA (2) 24V system, disconnect switch
Back-up alarm
Halogen work and roading lights, LED rear tail lights
Product Link™ PRO with three year subscription
Remote jump start post
Resettable main and critical function breakers

OPERATOR ENVIRONMENT

Cab, pressurized
75 mm (3 in) retractable seat belt, with audible alarm and indicator
Automatic temperature control
External heated mirrors with lower parabolic
Hydraulic control lockout
Ground level cab door release
Suspension seat, fabric
Lunch box storage
Radio ready speakers
Rear window defrost, electric
Mirror, single
Column mounted multi function control – lights, wipers, turn signal
Tilt and telescopic steering wheel
Tinted front glass
Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
Camera, rear view

OTHER STANDARD EQUIPMENT

Cat optimized Z-bar linkage with parallel lift
Large-access enclosure doors with adjustable close/open force
Recovery hitch, with pin
Remote mounted lubrication points
Lockable compartments and enclosures

Optional Equipment

OPTIONAL EQUIPMENT

Auto lube, integrated in secondary display
Auxiliary flow, third and fourth function
Beacon light, strobe
Cab, deluxe (standard in Europe)
- Camera, rear view integrated into advanced display
- Electrically adjustable external heated mirrors (2)
- Secondary display to enable features and adjust parameters
- LED interior lighting
- Sunscreen, front and rear
- Touchscreen secondary display
- Ride control adjustable speed activation
- Preventative maintenance reminders
- Integrated help function (26 languages)
Camera, roof mounted, front view with separate display
Cat Production Measurement weigh scale system integrated into secondary display
Cold start package
- Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
Coupler, (Fusion and ISO 23727)
Fenders (extended cover and full coverage)
Differential, limited slip, rear
Guarding packages
Lights, auxiliary, halogen or LED with engine and DEF compartment lights
Linkage, high lift
Payload Technology
- Cat Production Measurement (CPM)
- CPM Printer
Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
Radio packages
Ride Control System, adjustable through secondary display
Seats
- Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
- Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
Steering
- Dual mode and secondary
Tire Pressure Monitoring (TPM)
Counterweight, additional options
Debris packages (low, medium, high)
Rear Object Detection