TL642 w/StabilizersTelehandler
Telehandlers
Details
Rated Load Capacity
6500.0 lb
Maximum Lift Height
42.0 ft
Engine Model
Cat® C3.6L
Overview
CONFIGURED FOR SUCCESS
Cat Telehandlers offer performance and versatility.
Benefits
EFFICIENTLY POWERFUL
Superior stability and powerful hydraulics
ALL DAY COMFORT
Exceptional all-around visibility
DEFIANTLY DURABLE
Ground level servicing for easily accessible daily checks
Features at a Glance
- Operator Station
-
Intuitive Control Layout
All day operator comfort and efficiency is ensured through our easier to use control layout.Easier Access
Cab entry and exit is both easier and more convenient due to the well placed handholds.Operator Protection
The machine provides full operator security with OROPS or EROPS protection.Enhanced Visibility
The TL-Series cab has improved visibility due to the use of advanced virtual design techniques.
- Ease of Operation
-
Joystick Control
The joystick allows three simultaneous boom functions enabling application customization for more than a dozen configurations.Flow Sharing
Three simultaneous hydraulic functions are achieved using a full flow sharing hydraulic valve. A load sensing variable displacement pump allows full hydraulic power even at low revs.
- Performance
-
Lift Height
The TL642 can pick and place bricks and materials to a maximum height of 42 ft. (12.8 m).Reach
Job site obstacles present challenges demanding a machine to place loads at greater distances - the TL642 delivers.Maneuverability
The TL642 offers improved maneuverability, allowing it to work productively in confined areas.Steering Modes
The TL642 offers three steering modes (two wheel, crab and 4-wheel steer) to allow an operator to more easily position the machine. Steering modes are selected by a single three-position rocker switch. Steering position sensors are fitted as standard to all steering modes to be changed while moving.
- Power Train
-
Transmission
Th TL642 features a Cat Power-shift transmission.
- Versatility
-
Quick Coupler
A manual IT coupler is standard on the TL-Series machines. For optimum versatility, all machines are equipped with the hydraulic quick coupler, allowing the operator to more easily change non-hydraulic work tools without leaving the cab.Hydraulic Services
Machines are equipped with Auxiliary Hydraulic services, allowing the use of hydraulically operated work tools. All TL-Series telehandlers are equipped with a single auxiliary hydraulic service and continuous hydraulic flow.Work Tools
A wide range of work tools are available to meet most job site applications. Caterpillar Telehandler Work Tools extend the versatility of the machine. Built for performance and durability, these work tools deliver high productivity, long life and excellent value.- General Purpose Bucket (1.0 m3/1.3 yd3)
- Light Materials Bucket (2.0 m3/2.6 yd3, 2.5 m3/3.25 yd3, 3.0 m3/3.90 yd3)
- Material Handling Bucket (1.5 m3/1.95 yd3, )
- Multi Purpose Bucket (1.0 m3/1.3 yd3)
- Grapple Bucket (0.85 m3/1.1 yd3)
- Fixed Carriage
- Rotate Carriage
- Sideshift Carriage
- Pallet Forks
- Block Forks
- Lift Hook
- Truss Boom
Tires
A wide range of tire options enables the machine to be configured to achieve optimum job site performance.
- Cost of Ownership
-
Ease of Access
Cost of ownership starts with ease of service. All Cat Telehandler service points are accessible and major components are at ground level due to overall machine design.Daily Maintenance
Routine daily maintenance is now reduced to checking fluid levels and a walkaround inspection.Service Intervals
Engine oil, filter changes and routine lubrication are now only required every 500 hours.Reduced Componentry
With the reduction in the number of filters and extended service intervals, operating costs are the lowest in the industry.Equipment Protection Plan
Designed to enhance your telehandler ownership experience with comprehensive coverage and peace of mind.
- Serviceability and Customer Support
-
Access
All Cat Telehandler service points, including the combined transmission/hydraulic oil filter, are accessible and major components are at ground level due to the overall machine design. A cab mounted service point allows access to the fuel fill, hydraulic oil fill, washer bottle, fuse box and cab air filter for routine checks.Selection
Make detailed comparisons before you buy. Your Cat Dealer can give you precise answers to your questions.Purchase
Look at the value that the TL642 telehandler will offer you. Consider all the flexible financing options your Cat Dealer offers as well as day-to-day operating costs.Operation
Improving operating techniques can boost your profits. Your Cat Dealer has literature and other tools to help increase your productivity.Replacement
Repair, rebuild or replace? Your Cat Dealer can help you evaluate the cost involved so you can make the right choice.Product Support
You will find high availability of parts at our Dealer parts counter. Cat Dealers utilize a worldwide computer network to find in-stock parts to minimize machine downtime. Additionally, Caterpillar offers a line of genuine remanufactured components which can help lower repair costs.Easy Financing
Your Cat Dealer can provide a financing package to meet your needs.
Specifications
Full Specifications
- Engine
-
Engine Model
Cat® C3.6LGross Power - Basic
73.7 hpNote
Meets U.S. EPA Tier 4 Final emission standards.
- Weights
-
Operating Weight
22928 lb
- Operating Specifications
-
Rated Load Capacity
6500.0 lbMaximum Lift Height
42.0 ftLoad at Maximum Height - Stabilizers Down
6500.0 lbMaximum Forward Reach
30.0 ftLoad at Maximum Reach - Stabilizers Down
1700.0 lbTop Travel Speed
19 mile/h
- Dimensions
-
Height
8 ftWidth
8.0 ftWheel Base
11.25 ftLength - Fork Face
18.5 ftGround Clearance
17 inTurning Radius - Over Tires
12.0 ft
- Tires
-
Standard
370/75-28 Duraforce AirOptional (1)
370/75-28 Duraforce Foam FillOptional (2)
315/95-28 Telemaster SolidOptional (3)
13.00-24 16PR AirOptional (4)
13.00-24 12PR FoamOptional (5)
370/75-28 Non-Marking AirOptional
370/75-28 Non-Marking Foam
- Hydraulic System
-
Pump Type
Single-section
- Service Refill Capacities
-
Fuel Tank
38.3 gal (US)Hydraulic System
42 gal (US)
- Boom Performance
-
Boom Up
15.5 sBoom Down
10.7 sTele In
11.8 sTele Out
17.0 sDrawbar Pull - Basic
20,670 lb
- Braking System
-
Parking Brake
Spring-applied hydraulic release on front axle
- Brakes
-
Features
Service Brakes - inboard wet disc brakes on front and rear axles; Parking Brakes- spring-applied hydraulic release on front axle
- Operator Station
-
Features
Vinyl suspension seat, single electronic joystick, spacious interior, ergonomic cab
- Instrumentation
-
Features
Volt meter, hourmeter, engine oil pressure gauge, fuel gauge, water temperature gauge
- Work Tools
-
Cubing Forks
[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)Carriages - Side Shift
50 inPallet Forks - Option 1
[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)Carriages - Swing
100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)Carriages - Standard Tilt
50 inLumber Forks - Option 1
[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)Pallet Forks - Option 2
[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)Carriages - Dual Fork Positioning
50 inPallet Forks - Option 3
[2] 1829 mm, 60 mm × 150 mm ([2] 72 in, 2.36 in × 6 in)
Equipment
- Standard Equipment
-
TELESCOPIC BOOM
- Boom angle indicator
ELECTRICAL
- Alternator, 60 amp, 12 volt
- Battery, 12 volt, 1000 CCA
- Horn
- Alarm, backup
OPERATOR STATION
- Canopy, ROPS/FOPS
- Joystick, single electronic
- Adjustable joystick wristrest
- Low step, grab bars for easy entry
- Seat - vinyl, suspension with Cat logo
- Steering wheel spinner knob
- Floor mat - heavy duty
- Left side rear view mirror
- Service door, cab air intake filter, fuel fill, hydraulic fill, level indicator, fuse panel and washer fill
- Instruments - volt meter, hourmeter, engine oil pressure gauge, water temperature gauge. All gauges protected by clear acrylic cover.
- Park Brake with indicator light
- Steering Wheel with Cat logo
- Cat keys and locks
- Brakes - wet disc service
POWER TRAIN
- Engine,Cat® C3.6L (73.7 hp)
- Thermal starting aid
- Transmission, 4-speed forward, 3-speed reverse
- Cat filters, hoses and couplings
- Axles - Dana
- Steering - 4 wheel
- Parking brake with indicator light
- Drive - 4 wheel
STRUCTURE
- Chassis, frame level up to 10 degrees when operating in rough, uneven terrain
- Cat IT Coupler
ANTI-FREEZE
- Coolant - Anti-freeze, 50/50 Mix
TIRES
- Tires - 370/75-28 Duraforce Air
OTHER EQUIPMENT
- Integrated lift and tie down points
- Standard Cat color paint
- Auxillary hydraulics for auxillary attachments (one function)
- Optional Equipment
-
TELESCOPIC BOOM
- Hydraulic IT Coupler (includes Auxiliary Electrics)
ELECTRICAL
- Work Light Group: 2 Cab mounted headlights -- 2 forward, 1 rearward; 1 Reversing Light; 2 Boom Mounted Lights, 1 Rotating Beacon
- Engine heater block
- Heater - open cab
- Road Light Group -- Headlights, Brake Lights, Turn Signals
OPERATOR STATION
- Air conditioning
- Auxiliary hydraulics for Hydraulic Work Tools (one function)
- Single Joystick - with Rocker Switch
- EROPS - Cab Enclosure (Door, Safety Glass Windows, Front Windshield Wiper, Heater & Defroster Fan)
- Skylight Wiper
- Brick Guard - Top and front.
TIRES
- Tires - 13.00-24 12PR Foam
- Tires - 13.00-24 16PR Air
- Tires - 370/75-28 Duraforce Foam Fill
- Tires - 370/75-28 Non-Marking Air
- Tires - 315/95-28 Telemaster Solid
OTHER EQUIPMENT
- Fenders
- Tow Hook - Pintle Type
- Instant Hook - 4000 lb capacity, boom head mounted winch
- Outriggers
- Artic package - Package includes: 2400 AMP starter, 1000 watt hydraulic reservoir heater, 500 watt engine oil-pan heater, Dual maintenance free, 1375 CCA gel cell batteries, 160 watt battery heating blanket, 1000 watt engine block heater.
WORK TOOLS
- Access Work Platform - 8 ft x 4 ft; 1,000 maximum capacity (available from factory)
- Carriage - side shift, 50 in. (available from factory)
- Lifting Hook - fork mounted (available from factory)
- Truss Broom
- Carriage - standard tilt, 50 in. (available from factory)
- Carriage - wide tilt, 72 in. (available from factory)
- Carriage - standard rotate, 50 in. (available from factory)
- Carriage - swing, 72 in., 100 degrees, 6000 lb capacity, 5000 lb swung (available from factory)
- Pallet Forks - two 60 in, 2 in x 6 in, capacity per pair 6600 lb (available from factory)
- Pallet Forks - two 48 in, 2.36 in x 4 in, capacity per pair 6600 lb (available from factory)
- Cubing Forks - two 48 in, 2 in x 2 in, capacity per pair 3800 lb (available from factory)
- Bucket - General Purpose 1.3 Cu. Yd.
- Bucket - Material Handling 1.95 Cu. Yd.
- Bucket - Multi-Purpose, 1.3 Cu. Yd.