Foley Power Solutions Logo Foley-Rental-Logo-561x150 RIG360 Logo SITECH-Logo

770 Off-Highway Truck

Off-Highway Trucks

Details

Nominal Payload Class (100%)
42.1 ton (US)

Engine Model
Cat® C15

Top Speed - Loaded
45.8 mile/h

Contact

Foley Equipment Sales

+1 (316) 943-4211

Request a Quote

Overview

Performance and productivity

Cat’s 770 40-ton payload sets the standard for haul performance in construction and quarry industries. We’ve taken the best of our rugged, dependable Off-Highway Truck lineup and integrated it with technologies that help our environment, make operators more productive, and dramatically improve the economics of haul fleets. An optimal pass match for the 770 is the Cat 986K or 988K Wheel Loader or the 374F or 390F Hydraulic Excavators. No matter your business type, the 770 is designed to help you move materials safely and efficiently through every haul.

Benefits

Less CO2 Emissions

The 770 emits up to 11% less CO2 than the previous 770.

None

Achieve maximum performance with increased travel speed for faster cycle times, 7% more torque, and Improved traction control.<br> &nbsp;

None

Designed to be more efficient with two economy mode options, APECS transmission controls, and auto neutral idle.<br> <br> &nbsp;

None

Equipped with safety features for easy access to engine air cleaner housing, lockable ground level service centers, and&nbsp; convenient fill locations for fuel an DEF tanks.<br> <br> &nbsp;

Features at a Glance

ACHIEVE GREATER PRODUCTIVITY

ACHIEVE GREATER PRODUCTIVITY

        
  • Haul your materials faster with an accelerated travel speed.
    •     
  • Put more power to the ground with increased torque.
    •     
  • Enjoy greater productivity while using a more responsive Traction
    Control System (TCS).
    •     
  • Reduce tire wear with maximum by engaging TCS early in the slip.
    •     
  • Strong, predictable performance helps operators achieve the lowest cost per ton.
BOOST FUEL EFFICIENCY

BOOST FUEL EFFICIENCY

        
  • Up to 11% less fuel consumption.
    •     
  • Advanced Productivity Electronic Control System (APECS) allows the engine and transmission to communicate on a high level. This communication allows the machine to better utilize the power and torque the engine is producing.
    •     
  • Automatically optimize fuel consumption with the feature—Adaptive Economy mode reduces fuel use without affecting productivity and can be engaged with a single button.
    •     
  • Gain improvements in fuel efficiency with auto-neutral idle.
    •     
  • Haul your 770 truck at a more fuel-efficient engine speed and gear selection with speed limiting.
    •     
  • Conserve fuel with integrated Engine Idle Shutdown by the engine automatically initiating when the truck is in park and idle for a preset amount of time.







DESIGNED FOR SAFETY

DESIGNED FOR SAFETY

        
  • Improvements in accessibility with safe, ground-level access tofuel fill and daily maintenance points.
    •     
  • Ensure three points of contact when entering and exiting the machine with strategically placed walkways and grab rails.
    •     
  • Superior brake performance meets the latest brake standards—
        ISO 3450:2011.
    •     
  • The ground-level engine shut-off switch stops all fuel to the engine when activated and shuts down the machine safely.
    •     
  • Sturdy 4-point mounted cabin meets rollover protective structure/
        falling objects protective structure (ROPS/FOPS) standard.
    •     
  • 4-point seat belt provides enhanced safety to the operator.
    •     
  • Seat belt indicator implements both visual and audible alerts to the
        operator when seat belt is not fastened.
    •     
  • Lockout features help the service technician to perform
        maintenance work on the machine with safe mode.
    •     
  • Secondary steering activates automatically in case of primary
        system failure.
    •     
  • Overload speed limiter works with truck payload system to reduce
        machine speed automatically when the truck is overloaded. 


















WORK IN COMFORT

WORK IN COMFORT

        
  • Completely redesigned cab for a whole new standard in visibility, comfort, and productivity.
    •     
  • The new operator seat placement provides easier operation and comfort to the operator.
    •     
  • Improvements in enlarged views of the work area and its surroundings.
    •     
  • Access connectivity and decrease clutter with more storage areas in the newly designed cab.
    •     
  • Automatic cab temperature controls.
    •     
  • Cat next-generation deluxe seat for better operator comfort.
TECHNOLOGY THAT GETS WORK DONE

TECHNOLOGY THAT GETS WORK DONE

        
  • Integrated systems give you the ability to make timely, fact-based 
    decisions to maximize efficiency, improve productivity, and lower
    costs.
    •     
  • Gain valuable insight into how your machine is performing by continuously
     monitoring and collecting vital machine data via the advisor display with the software Vital Information Management System (VIMS™).  Applicable to both U.S. EPA Tier 4 Final/EU Stage V and U.S. EPA Tier 2 equivalent.
    •     
  • Truck Production Management System (TPMS) provides accurate weighing of the materials, stores 2,400 payload cycles, and reportson, haul cycle times, and distances with date and time stamps.
    •     
  • External payload indicator lights alert the loader when to stop, reducing the risk of machine overloading.
    •     
  • Product Link™ system connects to each machine wirelessly, 
    allowing you to monitor location, hours, fuel use, productivity, idle
    time, and diagnostic codes.
    •     
  • VisionLink®
    wirelessly connects you to your equipment, giving
    you access to essential information you need to know to run your business.
    •     
  • The Cat 770 is MineStar™ ready and includes Cat Product Link
    Elite and VIMS to help optimize equipment management, remote
    monitoring capabilities, machine availability, and component life while reducing both repair costs and the risk of catastrophic 
    failure.
    •     
  • Tons kilometers per hour/tons miles per hour (TKPH/TMPH) tire management system works with TPMS for improved tire life. 






REDUCED MAINTENANCE COST AND OTHER COSTS

REDUCED MAINTENANCE COST AND OTHER COSTS

• Grouped service points.
• Control particulate matter with two engine-mounted diesel
oxidation catalyst canisters. (Tier 4)
• NOx reduction system (NRS) technology replaces a portion of intake air with exhaust gas to control combustion temperatures and NOx production.(Tier 4)
• Parts commonality with other Cat equipment.
• Resolve problems before failure occurs with VIMS notifications.
• Torque converter stall (autostall) enables quick operating temperatures for best performance life.
• All LED lights provide longer life, brighter light, consume less power, and are more resistant to vibration or water damage. 




APPLICATION VERSATILITY

APPLICATION VERSATILITY

        
  • Get the right body option—Dual Slope, Flat Floor, or Quarry—for your material and jobsite needs.
    •     
  • For haul profiles including steep slopes, an optional Dual Slope body is available—offering excellent material retention.
    •     
  • The flat floor body is perfect for metering material, especially when
        feeding the crusher. 
    •     
  • Optimize your body life by selecting a liner package best suited
        for your application. We offer steel liners that work for most applications as well as rubber liners for extreme applications. 

Specifications

Full Specifications

Engine

Engine Model
Cat® C15

Rated Engine Speed
1700 r/min

Gross Power - SAE J1995
515 HP

Net Power - SAE J1349
477 HP

Net Power - ISO 9249
477 HP

Net Power - 80/1269/EEC
489 HP

Net Power - ISO 14396
508 HP

Net Torque - SAE J1349
1834 ft·lbf

Number of Cylinders
6

Bore
5.4 in

Stroke
6.7 in

Displacement
927.6 in³

Emissions
Meets U.S. EPA Tier 4 and EU Stage V emission standards.

Note (1)
Power rating applies at 1,700 rpm when tested under the specified condition for the specified standard.

Note (2)
Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).

Note (3)
No engine derating required up to 3000 m (9,843 ft) altitude.

Note (4)
Meets Japan Small Volume Exemption.

Weights - Approximate

Target Gross Machine Operating Weight
157000 lb

Target Gross Machine Weight
157000 lb

Chassis Weight
55948 lb

Body Weight
17306 lb

Note (1)
Chassis weight with 100% fuel, hoist, body mounting group, rims, and tires.

Note (2)
Body weight is the standard Dual Slope body with no liner and will vary depending on configuration.

Operating Specifications

Nominal Payload Class (100%)
42.1 ton (US)

Top Speed - Loaded
45.8 mile/h

Target Payload (100%)
42.1 ton (US)

Maximum Working Payload (110%)
46.3 ton (US)

Maximum Allowable Payload (120%)*
50.5 ton (US)

Body Capacity - SAE 2:1
32.9 yd³

Note (1)
*Refer to Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations.

Note (2)
Target payload and capacity based on Dual Slope body with no liner. Attachment selection will affect payload and maximum gross machine operating weight.

Transmission

Forward - 1
7.4 mile/h

Forward - 2
10.1 mile/h

Forward - 3
13.8 mile/h

Forward - 4
18.5 mile/h

Forward - 5
25.1 mile/h

Forward - 6
33.8 mile/h

Forward - 7
45.8 mile/h

Reverse
8.8 mile/h

Note
Maximum travel speeds with standard 18.00R33 (E4) tires.

Final Drives

Differential Ratio
1.92:1

Planetary Ratio
4.80:1

Total Reduction Ratio
9.26:1

Brakes

Brake Surface - Front
216 in²

Brake Surface - Rear
6235 in²

Brake Standards
ISO 3450:2011

Note
Target gross machine operating weight is 71 214 kg (157,000 lb).

Body Hoists

Pump Flow - High Idle
118 gal/min

Relief Valve Setting - Raise
2750 psi

Relief Valve Setting - Lower
500 psi

Body Raise Time - High Idle
7.5 s

Body Lower Time - Float
10 s

Body Power Down - High Idle
10 s

Capacity - Dual Slope - 100% Fill Factor

Struck
23.01 yd³

Heaped (SAE 2:1)*
32.9 yd³

Note (2)
*ISO 6483:1980.

Note (1)
Contact your local Cat dealer for body recommendation.

Capacity - Flat Floor - 100% Fill Factor

Struck
23.01 yd³

Heaped (SAE 2:1)*
32.9 yd³

Note (1)
Contact your local Cat dealer for body recommendation.

Note (2)
*ISO 6483:1980.

Weight Distributions - Approximate

Front Axle - Empty
49 %

Front Axle - Loaded
34 %

Rear Axle - Empty
51 %

Rear Axle - Loaded
66 %

Suspension

Empty Loaded Cylinder Stroke Front
9.2 in

Empty Loaded Cylinder Stroke Rear
5.9 in

Rear axle - Oscillation
8.9 °

Service Refill Capacities

Fuel Tank
140 gal (US)

Cooling System
33 gal (US)

Crankcase
17 gal (US)

Differential - Final Drives
47 gal (US)

Steering Tank
14.5 gal (US)

Steering System - Including Tank
23 gal (US)

Brake/Hoist Hydraulic Tank
38 gal (US)

Brake Hoist System
60 gal (US)

Torque Converter - Transmission System
17 gal (US)

DEF Tank
6 gal (US)

Tires

Standard Tire
18.00R33 (E4)

Note (1)
Productive capabilities of the 770G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.

Note (2)
Caterpillar recommends the customer evaluates all job conditions and consults the tire manufacturer for proper tire selection.

ROPS

ROPS Standards
Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.

FOPS Standards
Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.

Sound

Sound Standards (1)
Hearing protection may be needed when operating with open operator station & cab for extended periods or in noisy environment.

Sound Standards (2)
Exterior sound pressure power level for standard machine measured according to tests specified in ISO 6395:2008 is 116 dB(A).

Sound Standards (3)
Operator Equivalent Sound Pressure Level is 79 dB(A) & 74 dB(A) with EU sound suppression applied when ISO 6396:2008 is used.

Steering

Steering Standards
ISO 5010:2007

Steer Angle
40.5 °

Turning Diameter - Front
57.7 ft

Turning Circle - Clearance Diameter
66.6 ft

Note
Target gross machine operating weight is 71 214 kg (157,000 lb).

Dimensions

Height - Top of ROPS
12.7 ft

Overall Body Length
26.8 ft

Inside Body Length
18.5 ft

Overall Length
28.9 ft

Wheel Base
13 ft

Rear Axle - Tail
8.5 ft

Ground Clearance
1.6 ft

Dump Clearance
1.7 ft

Loading Height - Empty
10.3 ft

Inside Body Depth - Maximum
4.6 ft

Overall Height - Body Raised
27.1 ft

Operating Width
15.7 ft

Centerline Front Tire Width
10.2 ft

Engine Guard Clearance
1.8 ft

Outside Body Width
12.9 ft

Inside Body Width
11.9 ft

Front Canopy Height
13.5 ft

Rear Axle - Clearance
1.8 ft

Centerline of Rear Dual Tire Width
8.3 ft

Overall Tire Width
12.1 ft

Equipment

Standard Equipment

NOTE

  • Standard and optional equipment may vary. Consult your Cat dealer for details.

ELECTRICAL

  • Alarm, backup
  • Alternator, 115 ampere
  • Auxiliary jump start receptacle
  • Batteries, maintenance-free, 12V (2), 190 amp-hour
  • Electrical system, 24V
  • Lighting system:
    – Backup light (halogen)
    – Directional signals/hazard warning (front and rear LED)
    – Headlights, (halogen) with dimmer
    – Operator access courtesy lights (Developing Market Only)

PRODUCT LINK™ COMMUNICATIONS

  • Product Link Ready

GUARDS

  • Driveline
  • Engine crankcase

OPERATOR ENVIRONMENT

  • Air conditioning
  • Ashtray and cigarette lighter
  • Coat hook
  • Cup holders (4)
  • Diagnostic connection port, 24V
  • Entertainment Radio Ready:
    – 5 amp converter
    – Speakers
    – Antenna
    – Wiring harness
  • Gauges/indicators:
    – Air cleaner service indicator - electronic
    – Brake oil temperature gauge
    – Coolant temperature gauge
    – Hour meter
    – Tachometer
    – Engine overspeed indicator
    – Fuel level
    – Speedometer with odometer
    – Transmission gear indicator
  • Heater/defroster (11 070 kCal/43,930 BTU)
  • Hoist lever
  • Horn, electric
  • Light - dome
  • Light - courtesy
  • Messenger, display unit
  • Mirrors
  • Power port, 12V
  • ROPS cab, insulated/sound suppressed
  • Seat, Cat Comfort Series III:
    – full air suspension
    – four-point harness
  • Steering wheel, padded, tilt and telescopic
  • Storage compartment
  • Sun visor, tinted glass
  • Throttle lock
  • Windshield wiper (intermittent) and washer

POWER TRAIN

  • Air-To-Air Aftercooler (ATAAC)
  • Air cleaner with precleaner (1)
  • Automatic cold mode idle control
  • Electric start
  • Turbocharger
  • Braking system, hydraulic actuated:
    – Automatic Retarder Control (ARC) (utilizes rear oil-cooled, multiple disc brakes)
    – Brake release motor (towing)
    – Caliper-disc (front)
    – Extended Life Brakes
    – Oil-cooled, multiple disc (rear)
    – Parking
    – Secondary
    – Service
  • Transmission:
    – 7-speed automatic powershift
    – Body up-shift inhibitor
    – Controlled throttle shifting
    – Directional shift management
    – Downshift inhibitor
    – Neutral start switch
    – Neutral coast inhibitor
    – Reverse shift inhibitor
    – Reverse neutralizer during dumping
    – Programmable top gear selection

SUSPENSION SYSTEMS

  • Suspension, front and rear

OTHER STANDARD EQUIPMENT

  • Body safety pin (secures body in up position)
  • Body down indicator
  • CD-ROM parts book
  • Fan, hydraulic demand
  • Fuel tank (530 L/140 gal)
  • Guard, engine compartment
  • Guard, mud
  • Ground level battery disconnect
  • Ground level engine shutdown
  • Ground level grease fittings
  • Reservoirs (separate):
    – Brake/converter/hoist
    – Steering
    – Transmission/torque converter
  • Rims 15 × 33
  • Rock ejectors
  • Service platform, left and right side
  • Supplemental steering (automatic)
  • Tie down eyes
  • Tow hooks (front)/Tow pin (rear)
  • Vandalism protection locks

ANTIFREEZE

  • Extended Life Coolant to -35° C (-30° F)
Optional Equipment

NOTE

  • Standard and optional equipment may vary. Consult your Cat dealer for details.

OPTIONAL EQUIPMENT

  • Cat Engine Brake
  • Extended Life Brake Discs
  • Body heat/diverter box
  • Four (4) batteries
  • HID lights
  • Product Link
  • Backup alarm
  • Heated mirrors
  • Fuel heater
  • Ether aid
  • Coolant heater
  • Auto lube
  • Rear vision camera (WAVS)
  • Spare rims
  • Wheel chocks
  • Body sideboards
  • Traction Control System (TCS)

Resources

770 Off-Highway Truck - Key Features (Global)

770 Off-Highway Truck - Technical Specifications (Global)

Similar New Equipment

777 (07) Off-Highway Truck
Off-Highway Trucks

777 (07) Off-Highway Truck

Target Payload (100%): 101.1 ton (US)
Engine Model: Cat® C32B
Top Speed - Loaded: 40.9 mile/h

775 Off-Highway Truck
Off-Highway Trucks

775 Off-Highway Truck

Nominal Payload Class (100%): 70.5 ton (US)
Engine Model: Cat® C27
Top Speed - Loaded: 41.6 mile/h

772 (07) Off-Highway Truck
Off-Highway Trucks

772 (07) Off-Highway Truck

Nominal Payload Class (100%): 51.6 ton (US)
Engine Model: Cat® C18
Top Speed - Loaded: 49.2 mile/h

773 Off-Highway Truck
Off-Highway Trucks

773 Off-Highway Truck

Nominal Payload Class (100%): 61.7 ton (US)
Engine Model: Cat® C27
Top Speed - Loaded: 42 mile/h