Foley Power Solutions Logo Foley-Rental-Logo-561x150 RIG360 Logo SITECH-Logo

844 Wheel Dozer

Wheel Dozers

Details

Engine Model
C27 Cat®

Rated Speed
1800.0 r/min

Gross Power - ISO 14396
752.0 HP

Contact

Foley Equipment Sales

+1 (316) 943-4211

Request a Quote

Overview

Mobile. Agile. Versatile.

Cat Wheel Dozers are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. Engineered for your demanding work in large dozing applications, the 844 Wheel Dozer is the largest in the Cat Wheel Dozer line and is an ideal match for large mining operations, power generating utilities, the general contracting industry and wherever mobility, versatility and compaction is needed.

Benefits

IMPROVED EFFICIENCY

Lock-up torque converter, combined with an on-demand cooling fan and advanced engine idle management, delivers a more smooth shift

ENHANCED MAINTENANCE

Service access is conveniently located, helping to reduce maintenance time

ADDITIONAL SAFETY

Grouped, ground level engine and machine controls allow for safe and easy daily maintenance

LESS CO2 EMISSIONS

The 844 emits up to 18% less CO2 than the previous 844H.

Features at a Glance

Long Term Value and Durability
Unmatched Durability
        
  • The full box-section rear frame resists torsional shock and twisting forces.
    •     
  • Solid through-width push beams transfer and absorb stresses through a larger portion of the frame.
    •     
  • Robust structures withstand the toughest conditions and multiple lifecycles to improve your bottom line.
    •     
  • Resilient, durable blades are designed with excellent dozing and rolling characteristics.
    •     
  • Optimized axle mounting results in increased structural integrity.
    •     
  • Castings in the engine and frame are used in high stress areas to spread high loads.
    •     
  • One-piece castings enhance strength in key pin areas.
Move More with Less Fuel
Optimum Efficiency
        
  • Experience reliable efficiency with complete control over injection timing, duration, and pressure with Mechanically Actuated Electronic Unit Injection (MEUI™).
    •     
  • Best-in-class Cat planetary powershift transmission features consistent, smooth shifting and efficiency through integrated electronic controls.
    •     
  • Extended engine life and improved fuel efficiency with reduced rated speed.
    •     
  • Impeller Clutch Torque Converter (ICTC) and Rimpull Control System (RCS) provide precise rimpull control.
    •     
  • Load sensing hydraulic steering system enables precise machine control for easier loading.
    •     
  • Lock-up torque converter with advanced control of lock-up speed.
    •     
  • On demand cooling fan protects investment and lengthens lifecycle.
Safety First
Increased Safety
        
  • Battery disconnect, emergency engine shutdown, and stairway light switch are accessed through the ground level power service center.
    •     
  • Optional Cat Detect with Object Detection System (rearview camera and radar) or Vision (rearview camera) increase operator awareness around the machine.
    •     
  • Cab-mounted LED strobes provide warning for others near the machine.
    •     
  • Wider stairs with reduced stair angles increase safety for operators.
    •     
  • Access stairs via a powered platform from cab or ground level and have emergency egress access.
Technology that Gets Work Done
Innovative Technology
        
  • Integrated technologies allow you to monitor, manage, and enhance your jobsite operations.
    •     
  • Product Link™ remote monitoring provides valuable insight into machine or fleet performance through the VisionLink® interface, so you can make decisions that boost jobsite efficiency and lower operating costs.
    •     
  • Vital Information Management System (VIMS™) 3G touchscreen monitor gives access to a wide range of sensor information and enhanced machine data to resolve problems before machine failure.
    •     
  • Optional Cat Detect technologies enhance awareness of the environment around the machine for increased safety.
Work In Comfort
Enhanced Operator Comfort
        
  • Steering and Transmission Integrated Control System (STIC™) combines directional selection, gear selection, and steering into a single lever, maximizing responsiveness and control while reducing operator fatigue.
    •     
  • Operators can easily enter and exit the cab with fold-up STIC steer/armrest, reduced access stairway angles, and standard stairway lighting.
    •     
  • Experience reduced vibrations with isolated cab mounts and seat-mounted implement and steering controls.
    •     
  • Reduced interior sound levels keep operators comfortable throughout their entire shift.
Reduce Environmental Impact
Improved Sustainability
        
  • Meets U.S. EPA Tier 4 Final emissions standards.
    •     
  • Emits up to 18% less Co2 /hr.*
    •     
  • Automatic Engine Idle Shutdown conserves fuel when machine is not in use.
    •     
  • Generate less waste with maintenance-free batteries.
    •     
  • Maximize machine life and lower operating costs with Caterpillar Reman and Certified Rebuild programs, which utilize reused or remanufactured components for 40 to 70 percent cost savings.
    •     
  • Retrofit packages from Caterpillar deliver new features to older machines to get the most from your investment.
Save on Service and Maintenance
Simplified Maintenance
        
  • Swing-out fuel, hydraulic oil coolers, and condenser allow for easy access cleanout.
    •     
  • Machine features ground level or platform access to easily reach daily service points.
    •     
  • Swing-out doors on either side of the engine compartment provide easy access to critical daily service checks.
    •     
  • Optional tire pressure monitoring system provides real-time information to the operator in the cab for optimized tire life.
    •     
  • Electronics bay is conveniently located inside the cab.
    •     
  • Sight gauges offer quick visual inspection to minimize fluid contamination.
    •     
  • Lighting inside the engine compartment improves visibility to service points.
    •     
  • Ecology drains prevent spills and allow for easier service.
    •     
  • 500-hour engine oil and filter change interval with S•O•S oil sampling analysis.
    •     
  • Service center includes drain and fill, electronic technician connection, and fluid level status.
    •     
  • Axle oil cooler and Automatic Retarder Control prevents unnecessary wear from accelerating down declines.
Purpose-Built Cat Attachments
Built for Your Operation
        
  • Dependable blades are designed for mining with press rib construction and optimized widths and capacities for excellent dozing and rolling.
    •     
  • Available Cat coal blades retain load control and a large capacity for lighter materials.
    •     
  • Semi-U Blade features the increased capacity and spreading capabilities of a straight blade.
    •     
  • Heavy-Duty Semi-U blade includes a Hardox 400 Liner plate, side plates, and additional reinforcements at the bottom of the blade.
    •     
  • Equipped with the Cat MineStar System, a suite of integrated mine operations and mobile equipment technologies.
    •     
  • Cat MineStar’s capabilities help manage all aspects of operation.
    •     
  • Fleet provides remote machine tracking capabilities.
    •     
  • Terrain for Loading enables high precision management of load management.
    •     
  • Detect assists the operator with areas of limited visibility.
    •     
  • Health delivers machine condition and operating data and diagnostic tools for longer machine lifecycle.

Specifications

Full Specifications

Engine

Engine Model
C27 Cat®

Rated Speed
1800.0 r/min

Gross Power - ISO 14396
752.0 HP

Gross Power - SAE J1995
766.0 HP

Net Power - SAE J1349 - Standard Ambient
699.0 HP

Net Power - SAE J1349 - High Ambient
648.0 HP

Bore
5.4 in

Stroke
6.0 in

Displacement
1649.5 in³

Peak Torque - Speed
2624.0 lb/ft

Torque Rise
18.0 %

Emissions
U.S. EPA Tier 4 Final and EU Stage V or China Nonroad Stage III Emissions standards, equivalent to U.S. EPA Tier 2

Operating Specifications

Operating Weight
165089.0 lb

Blade Capacities
15.9 - 30.7 m3 (20.7 - 40.2 yd3)

Transmission

Transmission Type
Cat Planetary Power Shift

Converter Drive - Forward 1
4.5 mile/h

Converter Drive - Forward 2
8.3 mile/h

Converter Drive - Forward 3
14.2 mile/h

Converter Drive - Reverse 1
4.9 mile/h

Converter Drive - Reverse 2
9.1 mile/h

Converter Drive - Reverse 3
15.5 mile/h

Direct Drive - Forward 1
Lock-up disabled

Direct Drive - Forward 2
8.5 mile/h

Direct Drive - Forward 3
15.2 mile/h

Direct Drive - Reverse 1
5.4 mile/h

Direct Drive - Reverse 2
9.6 mile/h

Direct Drive - Reverse 3
16.4 mile/h

Hydraulic System - Lift/Tilt

Output at 2,000 rpm and 6900 kPa (1,000 psi)
82.0 gal/min

Cylinders, Double Acting - Lift, Bore and Stroke
133 mm × 1535 mm (5.25 in × 60.4 in)

Cylinder, Double Acting - Tilt and Tip, Bore and Stroke
210 mm × 188 mm (8.25 in × 7.4 in)

Relief Valve Setting - Bulldozer (Large Pump)
2700.0 psi

Relief Valve Setting - Tilt Cylinders (Small Pump)
2920.0 psi

Hydraulic System - Steering

Steering System - Circuit
Pilot, load sensing

Steering System - Pump
Piston, variable displacement

Minimum Turning Radius - Over Blade
34.0 ft

Total Steering Angle
35.0 °

Maximum Flow
94.3 gal/min

Relief Valve Setting
4500.0 psi

Service Refill Capacities

Fuel Tank - Standard
286.6 gal (US)

Cooling System
54.9 gal (US)

Crankcase
20.0 gal (US)

Transmission
29.1 gal (US)

Differential - Final Drives - Front
71.6 gal (US)

Differential - Final Drives - Rear
68.9 gal (US)

Hydraulic System - Implement and Hydraulic Fan
68.9 gal (US)

Hydraulic System - Steering and Braking
34.9 gal (US)

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Axles

Front
Fixed

Rear
Trunnion

Oscillation Angle
8.5 °

Brakes

Brakes
Meets ISO 3540:2011

Sound Performance - Standard

Operator Sound Level (ISO 6396:2008)
69.0 dB(A)

Machine Sound Level (ISO 6395:2008)
115.0 dB(A)

Sound Performance - Suppression

Operator Sound Level (ISO 6396:2008)
69.0 dB(A)

Machine Sound Level (ISO 6395:2008)
113.0 dB(A)

Cab

ROPS/FOPS
ISO 3471:2008 and ISO 3449:2005 Level II Standards

Dimensions (Approximate)

Height - Top of ROPS
17.2 ft

Height - Top of Exhaust Pipe
16.6 ft

Height - Top of Hood
12.7 ft

Ground Clearance
2.0 ft

Centerline of Front Axle to Hitch
7.5 ft

Centerline of Rear Axle to Edge of Bumper
12.5 ft

Wheel Base
15.1 ft

Length - With Blade on Ground
36.5 ft

Equipment

Standard Equipment

NOTE

  • Standard and optional equipment may vary. Consult your Cat dealer for details.

OPERATOR ENVIRONMENT

  • Air conditioner and heater with automatic temperature control
  • Cab, sound-suppressed pressurized, protective structure (ROPS/FOPS), radio ready for (entertainment) includes antenna, speakers and converter (12V, 10-15 amp)
  • 12V power port for mobile phone or laptop connection
  • Cigar lighter and ashtray
  • Coat hook
  • Electro-hydraulic blade controls (joystick)
  • Flip-up armrest
  • Heater and defroster
  • Horn, electric
  • Instrumentation, gauges: - Engine coolant temperature - Fuel level - Ground speed - Gear - Hydraulic oil temperature - Speedometer/tachometer - Torque converter temperature
  • Instrumentation, warning indicators: - Action alert system, three category - Automatic transmission model enable status - Brake malfunction - Bucket float status - Delayed engine shutdown status - Engine idle shutdown status - Engine malfunction - Fuel economy mode enable status - Hydraulic lockout - Lockup clutch enable status - Low fuel level - Parking brake status - Rimpull control enable status - Seatbelt warning - Secondary steering (if equipped) - Throttle lock status - Transmission gear
  • Keypad, control with indicator lights: - Auto trans mode speed range - Auto/manual transmission mode - Lockup clutch - Reduced rimpull - Throttle lock
  • Light, dome (cab)
  • Lunchbox and beverage holders
  • Mirrors, rearview (externally mounted)
  • Seat, premium with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment, and adjustable-length seat cushion
  • STIC control system with steering lock
  • Tinted glass
  • Wet-arm wipers/washers (front, rear and corner) intermittent front wiper
  • Converter (12V, 10/15 amp) and power port

POWER TRAIN

  • Brakes, oil cooled, multi-disc, service/secondary
  • Axle-shaft oil-disc service brake
  • Electro hydraulic parking brake
  • Cat clean emission module (Tier 4 only)
  • Demand fan
  • Engine Cat C27
  • Fuel priming pump (electric)
  • Ground level engine shutoff
  • Mufflers (under hood) (Tier 2 only)
  • Precleaner, engine air intake
  • Radiator, Aluminum Modular (AMR)
  • Separated cooling system
  • Starting aid, (ether) automatic
  • Throttle Lock electronic
  • Torque Converter, Impeller Clutch with lock-up clutch feature and rimpull control system
  • Transmission, 534 mm (21 in) planetary power shift (electronic) (3F/3R)

ELECTRICAL

  • Alternator, 150 amp
  • Batteries, maintenance free (4 - 1,400 CCA)
  • Deutsch terminal connectors
  • Electrical system, 24V
  • Electronic transmission control
  • Lighting system, halogen (front and rear) lighting, access stairway, engine compartment
  • Starting and charging system, 24V
  • Starter lockout in bumper
  • Starting receptacle for emergency start
  • Transmission lockout in bumper

SERVICE

  • Vital Information Management System (VIMS) 3G with graphical information display: external data port, customizable operator profiles
  • Case drain filters
  • Coupling, Caterpillar O-ring face seals
  • Guards, crankcase and power train
  • Hitch, drawbar with pin
  • Hoses, Cat XT
  • Oil sampling valves
  • Product Link™

SAFETY

  • Camera, rear vision
  • Implement lockout switch
  • Seat belt, retractable, 76 mm (3 in) wide
  • Trainer seat with lap belt
  • Alarm, back-up
  • Emergency platform egress
  • Stairway, left and right rear access
  • Steering, secondary
  • Toe kicks

TRAMMING

  • Fenders, steel (front)

OTHER

  • Axle temperature sensor
  • Battery disconnect and jump start receptacle, bumper
  • Economy mode with on demand throttle
  • Engine, crankcase, 500 hour interval with CH4
  • Engine idle management features: - Auto idle kickdown - Delayed engine shutdown - Engine idle shutdown
  • Grouped/labeled lube points
  • Positive flow control hydraulic system
  • Sight Gauges: hydraulic tanks, steering/fan and implement/brake, and transmission
  • Steering, load sensing
  • Vandalism protection caplocks
  • Premixed 50% concentration of extended life coolant with freeze protection to -34° C (-29° F)
Optional Equipment

NOTE

  • Standard and optional equipment may vary. Consult your Cat dealer for details.

POWER TRAIN

  • 50° C (-58° F) antifreeze
  • Engine oil change system, high speed, Wiggins
  • Engine block heater 120V or 240V
  • High ambient cooling - software

BLADES

  • Semi-U - 17.8 m3 (23.3 yd3)
  • HD Semi-U - 16.1 m3 (21.1 yd3)
  • Coal - 30.7 m3 (40.2 yd3)

OPERATOR ENVIRONMENT

  • Cab precleaner
  • AM/FM/MP3 radio
  • Satellite Sirius radio with Bluetooth
  • LED warning strobe
  • CB radio ready
  • Window sun shade

TRAMMING

  • Front and rear roading fenders

MISCELLANEOUS ATTACHMENTS

  • Fast fill fuel system (Shaw-Aero)
  • Axle oscillation stop
  • Paint, black blade rear

OTHER

  • Venturi stack

Resources

844 Wheel Dozer - Key Features (Global)

844 Wheel Dozer - Technical Specifications (Global)

Similar New Equipment

824K Wheel Dozer
Wheel Dozers

824K Wheel Dozer

Engine Model: Cat® C15 
Net Power - ISO 9249: 405 HP
Stroke: 6.7 in

854 Wheel Dozer
Wheel Dozers

854 Wheel Dozer

Engine Model: Cat C32B
Gross Power: 907 HP
Operating Weight: 224,647 lb

814 Wheel Dozer
Wheel Dozers

814 Wheel Dozer

Engine Model: Cat C7.1
Net Power (SAE J1349:2011): 249 HP
Operating Weight: 48526 lb

834 Wheel Dozer
Wheel Dozers

834 Wheel Dozer

Engine Model: Cat® C18 
Rated Speed: 1900.0 r/min
Peak Power Speed: 1500.0 r/min