CG137-12 Gas Engine

Gas Compression Engines

Details

Maximum Rating
600.0 BHP

Rated Speed
1800 rpm

Emissions
NSPS Site Compliant Capable with Caterpillar-supplied AFRC & Customer-provided Aftertreatment, 0.5% O2 Set Point

Contact

Foley Equipment Sales

+1 (316) 943-4211

Request a Quote

Overview

Tough and durable, with field-proven head design to maximize time between overhauls. CG137 engines are equipped with ADEM A4 technology that brings performance, uptime, and low operating cost to your operation. CG137 engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime. Ideal applications for CG137-12 engines include gas lift, gas gathering, and wellhead gas compression. Cat CG137-12 gas engine. Ratings: 447 bkW (600 bhp) @ 1800 rpm are NSPS site compliant capable with Caterpillar air-fuel ratio control and aftertreatment.

Features at a Glance

Advanced Digital Engine Management
The ADEM A4 system represents the next generation of engine management systems while reducing the number of mechanical components and easing troubleshooting. Features include: • Air/Fuel Ratio Control (AFRC) • Electronic ignition • Electronic governing/speed control • Start/stop logic • Engine protection and monitoring
Full Range of Attachments
Large variety of factory-installed engine attachments reduces packaging time
Gas Engine Rating Pro (GERP)
GERP is a web-based program designed to provide site performance capabilities for Cat® natural gas engines for the gas compression industry. GERP provides engine data for your site's altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.
Product Support Offered Through Global Cat Dealer
More than 2,200 dealer outlets Cat factory-trained dealer technicians service every aspect of your petroleum engine Caterpillar parts and labor warranty Preventive maintenance agreements available for repairbefore-failure options S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval
Over 80 Years of Engine Manufacturing Experience
Over 60 years of natural gas engine production Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products. - Cast engine blocks, heads, cylinder liners, and flywheel housings - Machine critical components - Assemble complete engine
Web Site
For all your petroleum power requirements, visit www.cat.com/oilandgas.

Specifications

Full Specifications

Engine Specifications

Maximum Rating
600.0 BHP

Rated Speed
1800 rpm

Emissions
NSPS Site Compliant Capable with Caterpillar-supplied AFRC & Customer-provided Aftertreatment, 0.5% O2 Set Point

Minimum Rating
600.0 BHP

Compression Ratio
8.3:1

Aspiration
Turbocharged - Aftercooled

Rotation from Flywheel End
Counterclockwise

Flywheel and Flywheel Housing
SAE No. 14 or 18, Flywheel Housing SAE No. 0

Flywheel Teeth
136

Displacement
1648.0 in³

Oil Change Interval
750 hours

Ignition, Protection
Electronic ADEM A4

Air/Fuel Ratio Control
Electronic ADEM A4

Stroke
6.0 in

Bore
5.4 in

Length
80.19 in

Width
59.65 in

Height
66.97 in

Weight - Dry
6250.0 lb

Capacity for Liquids

Cooling System
20.0 gal (US)

Lube Oil System - Refill
45.0 gal (US)

Equipment

Standard Equipment

Air Inlet System

  • Air cleaner — single element with service indicator
  • Optional air inlet adapter and rain cap — recommended for weather protection

Control System

  • ADEM A4
  • Class 1, Division 2, Group C&D and Zone 2

Cooling System

  • Jacket water thermostats and housing — full open temperature 98°C (208°F)
  • Jacket water pump — gear driven, centrifugal, non-self-priming
  • Aftercooler water pump — gear driven, centrifugal, non-self-priming
  • Aftercooler core — for treated water and sea air atmosphere

Exhaust System

  • Exhaust manifolds — watercooled
  • Exhaust elbow — dry 203 mm (8 in)
  • Three-way catalyst — 1.0 g NOx and 0.5 g NOx NTE options

Flywheels & Flywheel Housings

  • Flywheel, SAE No. 14 or 18
  • Flywheel housing, SAE No. 0
  • SAE standard rotation

Fuel System

  • Air/fuel ratio control
  • Gas pressure regulator
  • Natural gas carburetor

Lube System

  • Crankcase breather — top mounted
  • Oil cooler
  • Oil filter — RH
  • Oil filler in valve cover, dipstick — RH

Mounting System

  • Engine mounting rails — 254 mm (10 in) industrialtype, entire length

Protection System

  • ADEM A4 protection
  • The following include alarm and shutdown:
  • The following is display only

General

  • Paint, Caterpillar yellow
  • Crankshaft vibration damper and drive pulleys
  • Lifting eyes
  • Cylinder block inspection covers
Optional Equipment

Charging Alternator

  • 24V, 35A CSA alternator

Exhaust System

  • Exhaust flex fitting
  • Exhaust elbow
  • Exhaust flange — ANSI

Instrumentation

  • Operator interface panel
  • Operator interface panel enclosure
  • 15', 20', 50' interconnect harness

Starting System

  • Air pressure regulator
  • Air start silencer
  • Vane starter
  • Electric starter
  • Turbine starter

Fuel System

  • Fuel filter

Air Inlet System

  • Precleaner
  • Rain cap

Resources

CG137-12

Similar New Power Solutions

G3606 A4 Gas Engine
Gas Compression Engines

G3606 A4 Gas Engine

Maximum Rating: 2065 BHP
Rated Speed: 1000 rpm
Emissions: NSPS Site Compliant Capable with Customer-provided Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx

G3616 A4 Gas Compression Engine
Gas Compression Engines

G3616 A4 Gas Compression Engine

Maximum Rating: 5500 BHP
Rated Speed: 1000 rpm
Emissions: NSPS Site Compliant Capable with Customer-provided Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx

G3608 A4 Gas Compression Engine
Gas Compression Engines

G3608 A4 Gas Compression Engine

Maximum Rating: 2750 BHP
Rated Speed: 1000 rpm
Emissions: NSPS Site Compliant Capable with Customer-provided Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx

G3612 A4 Gas Compression Engine
Gas Compression Engines

G3612 A4 Gas Compression Engine

Maximum Rating: 4125 BHP
Rated Speed: 1000 rpm
Emissions: NSPS Site Compliant Capable with Customer-provided Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx

G3516J Gas Engine
Gas Compression Engines

G3516J Gas Engine

Maximum Rating: 1500 BHP
Rated Speed: 1400 rpm
Emissions: NSPS Site Compliant Capable with Customer-provided Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx

G3516 TA Gas Engine
Gas Compression Engines

G3516 TA Gas Engine

Maximum Rating: 1380 BHP
Rated Speed: 1400 rpm
Emissions: With Caterpillar supplied AFRC and Customer supplied .4% 02 Set point

G3520J Gas Compression Engine
Gas Compression Engines

G3520J Gas Compression Engine

Maximum Rating: 1725 BHP
Rated Speed: 1400 rpm
Emissions: With Customer Supplied Aftertreatment, .5 g/bhp-hr NOx

G3304B Gas Compression Engine
Gas Compression Engines

G3304B Gas Compression Engine

Maximum Rating: 95.0 BHP
Rated Speed: 1800 rpm
Emissions: NSPS Site Compliant Capable with Caterpillar or Customer-provided AFRC & Customer-provided Aftertreatment 0.5 & 1.0 g/bhp-hr NOx

G3306B Gas Compression Engine
Gas Compression Engines

G3306B Gas Compression Engine

Maximum Rating: 211.0 BHP
Rated Speed: 1800 rpm
Emissions: With Caterpillar or Customer supplied AFRC & Aftertreatment, 0.1g and 0.5g/bhp-hr NOx

G3406 Gas Compression Engine
Gas Compression Engines

G3406 Gas Compression Engine

Maximum Rating: 325.0 BHP
Rated Speed: 1800 rpm
Emissions: 2% 02 Emissions Rating: Export Only