G3606 A4 Gas Engine

Gas Compression Engines

Details

Maximum Rating
2065 BHP

Emissions
NSPS Site Compliant Capable

Displacement
7762.0 in³

Contact

Foley Equipment Sales

+1 (316) 943-4211

Request a Quote

Overview

G3600 ADEM™4 engines provide a wide range of power options to fit your gas compression application. G3600 ADEM™4 engines bring the highest uptime in the industry and long operating intervals between overhaul. Operators that use G3600 ADEM™4 engines in their fleet enjoy virtually no unscheduled downtime, the right power for their application, the lowest operating costs, and emissions compliance. Ideal applications for G3600 ADEM™4 engines include centralized gathering stations, gas processing, transmissions, and storage applications. Cat G3606 ADEM™4 Gen 1 gas engine with ratings: 1398 bkW (1875 bhp) @ 1000 rpm and ADEM™4 Gen 2 gas engine ratings: standard power - 4717 bKW (1900 hp) and uprate power - 1540 bKW (2065 bhp) @ 1000 rpm. NSPS site compliant capable.

Features at a Glance

Emissions
Meets U.S. EPA Spark Ignited Stationary NSPS Emissions for 2010 with the use of an oxidation catalyst
Lean Burn Engine Technology
Lean-burn engines operate with large amounts of excess air. The excess air absorbs heat during combustion reducing the combustion temperature and pressure, greatly reducing levels of NOx. Lean-burn design also provides longer component life and excellent fuel consumption.
Ease of Operation
Includes engine mounted thermostats, compress oil cooler connections, jacket water and lube oil heater connections.
Advanced Digital Engine Management
ADEM4 engine management system integrates speed control, air/fuel ratio control, and ignition/detonation controls into a complete engine management system. ADEM4 has improved: user interface, display system, shutdown controls, and system diagnostics.
Gas Engine Rating Pro
GERP is a web-based program designed to provide site performance capabilities for Cat® natural gas engines for the gas compression industry. GERP provides engine data for your site's altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.https://gerp.cat.com
Product Support Offered Through Global Cat Dealer
More than 2,200 dealer outlets Cat factory-trained dealer technicians service every aspect of your petroleum engine Cat parts and labor warranty Preventive maintenance agreements available for repairbefore-failure options S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval
Over 80 Years of Engine Manufacturing Experience
Over 80 years of natural gas engine production Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products - Cast engine blocks, heads, cylinder liners, and flywheel housings - Machine critical components - Assemble complete engine
Website
For all your petroleum power requirements, visit www.cat.com/oilandgas

Specifications

Full Specifications

Engine Specifications

Maximum Rating
2065 BHP

Emissions
NSPS Site Compliant Capable

Displacement
7762.0 in³

Minimum Rating
1900 BHP

Compression Ratio
9.2:1 Gen 1 (7:6:1 Gen 2)

Aspiration
Turbocharged-Aftercooled

Rotation from Flywheel End
Counterclockwise

Flywheel Teeth
255

Weight - Dry
36883.0 lb

Oil Change Interval
5000 hours

Ignition, Protection
Electronic (ADEM™ A4)

Stroke
11.8 in

Bore
11.8 in

Capacity for Liquids

Cooling System
124.0 gal (US)

Lube Oil System - Refill
187.0 gal (US)

Equipment

Standard Equipment

Air Inlet System

  • Air cleaner — standard-duty inlet air adapter

Control System

  • A4 control system — provides electronic governing integrated with air/fuel ratio control and individual cylinder ignition timing control
  • Electrical system and instrumentation certified for Class I, Division 2, Group D hazardous location. Includes entire ADEM A4 system and optional control panel.

Cooling System

  • Jacket water pump
  • Jacket water thermostats and housing
  • Aftercooler/oil cooler pump
  • Aftercooler/oil cooler thermostats and housing
  • Two-stage aftercooler
  • Jacket water heater connections
  • Standard ANSI connections

Exhaust System

  • Dry exhaust manifolds
  • Single vertical outlet adapter
  • Stainless steel encapsulated insulation

Flywheels and Flywheel Housing

  • SAE standard rotation

Fuel System

  • Gas admission valves -- electronically controlled fuel supply pressure

Ignition System

  • A4 control system — senses individual cylinder detonation and controls individual cylinder timing

Lube System

  • Crankcase breathers (top mounted)
  • Oil cooler
  • Oil filter
  • Oil pan drain valves -- front and rear

Mounting System

  • Engine mounting feet (four total)

Protection

  • Electronic shutoff system with purge cycle
  • Crankcase explosion relief valves
  • Gas shutoff valve

Starting System

  • Air starting system

General

  • Paint — Cat yellow
  • Vibration dampers
Optional Equipment

Air Inlet System

  • Heavy-duty air cleaner with precleaners

Charging System

  • 35 Amp & 65 Amp charging alternators – CSA approved

Exhaust System

  • Flexible bellows adapters
  • Exhaust expander
  • Weld flanges

Fuel System

  • Fuel filter
  • Gas pressure regulator
  • Flexible connection

Instrumentation

  • LCD display panel
  • Remote data monitoring and speed control
  • Color HMI display
  • Compatible with Cat® Electronic Technician (ET) and Data View
  • Modbus and Ethernet capable

Lube System

  • Air or electric motor-driven prelube
  • Duplex oil filter
  • RH Service
  • Lube oil makeup system

Mounting System

  • Mounting plates (set of four)
  • Extra mounting feet (set of two)
  • Extra mounting plates (set of two)

Power Take-Offs

  • Front stub shafts

Starting System

  • Air pressure reducing valve

General

  • Engine barring device
  • Damper guard

Similar New Power Solutions

G3616 A4 Gas Compression Engine
Gas Compression Engines

G3616 A4 Gas Compression Engine

Maximum Rating: 5500 BHP
Emissions: NSPS Site Compliant Capable
Displacement: 20698.0 in³

G3608 A4 Gas Compression Engine
Gas Compression Engines

G3608 A4 Gas Compression Engine

Maximum Rating: 2750 BHP
Emissions: NSPS Site Compliant Capable
Displacement: 10350.0 in³

G3612 A4 Gas Compression Engine
Gas Compression Engines

G3612 A4 Gas Compression Engine

Maximum Rating: 4125 BHP
Emissions: NSPS Site Compliant Capable
Displacement: 15528.0 in³

G3516J Gas Engine
Gas Compression Engines

G3516J Gas Engine

Maximum Rating: 1380 BHP
Emissions: U.S. EPA Spark Ignited Stationary NSPS emissions
Displacement: 4211 in³

G3516 TA Gas Engine
Gas Compression Engines

G3516 TA Gas Engine

Maximum Rating: 1380.0 BHP
Emissions: NSPS Site Compliant Capable
Minimum Rating: 660.0 BHP

G3520J Gas Compression Engine
Gas Compression Engines

G3520J Gas Compression Engine

Emissions: U.S. EPA Spark Ignited Stationary NSPS emissions for 2010
Minimum Rating: 1725.0 BHP
Bore: 6.7 in

G3304B Gas Compression Engine
Gas Compression Engines

G3304B Gas Compression Engine

Maximum Rating: 95.0 BHP
Emissions: NSPS 2010
Displacement: 427.0 in³

G3306B Gas Compression Engine
Gas Compression Engines

G3306B Gas Compression Engine

Maximum Rating: 211.0 BHP
Emissions: NSPS 2010
Displacement: 638.0 in³

G3406 Gas Compression Engine
Gas Compression Engines

G3406 Gas Compression Engine

Maximum Rating: 325.0 BHP
Emissions: NSPS Site Compliant Capable
Displacement: 891.0 in³

CG137-8 Gas Compression Engine
Gas Compression Engines

CG137-8 Gas Compression Engine

Maximum Rating: 400.0 BHP
Emissions: NSPS Site Compliant Capable
Displacement: 1099.0 in³