G3304B Gas Compression Engine

Gas Compression Engines

Details

Maximum Rating
95.0 BHP

Rated Speed
1800 rpm

Emissions
NSPS Site Compliant Capable with Caterpillar or Customer-provided AFRC & Customer-provided Aftertreatment 0.5 & 1.0 g/bhp-hr NOx

Contact

Foley Equipment Sales

+1 (316) 943-4211

Request a Quote

Overview

Tough and durable, built on the industry-standard G3300 platform and equipped with technology that brings performance, uptime, and low operating cost to your operation. G3304B engines meet the most demanding continuous duty gas compression applications with virtually no unscheduled downtime. Ideal applications for G3304B engines include gas lift, gas gathering, and wellhead gas compression. Cat G3304B gas engine. Ratings: 71 bkW (95 bhp) @ 1800 rpm are NSPS site compliant capable with Caterpillar or customer-provided air-fuel ratio control and aftertreatment.

Features at a Glance

Advanced Digital Engine Management
The ADEM A4 system represents the next generation of engine management systems while reducing the number of mechanical components and easing troubleshooting. Features include: • Air/Fuel Ratio Control (AFRC) • Electronic ignition • Electronic governing/speed control • Start/stop logic • Engine protection & monitoring
Full Range of Attachments
Large variety of factory-installed engine attachments reduces packaging time
Gas Engine Rating Pro (GERP)
GERP is a web-based program designed to provide site performance capabilities for Cat® natural gas engines for the gas compression industry. GERP provides engine data for your site's altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.
Product Support Offered Through Global Cat Dealer
More than 2,200 dealer outlets Cat factory-trained dealer technicians service every aspect of your petroleum engine Caterpillar parts and labor warranty. Preventive maintenance agreements available for repairbefore-failure options S•O•SSM program matches your oil and coolant samples against Catepillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval
Over 80 Years of Engine Manufacturing Experience
Over 60 years of natural gas engine production Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products. - Cast engine blocks, heads, cylinder liners, and flywheel housings - Machine critical components - Assemble complete engine
Web Site
For all your petroleum power requirements, visit www.cat.com/oilandgas.

Specifications

Full Specifications

Engine Specifications

Maximum Rating
95.0 BHP

Rated Speed
1800 rpm

Emissions
NSPS Site Compliant Capable with Caterpillar or Customer-provided AFRC & Customer-provided Aftertreatment 0.5 & 1.0 g/bhp-hr NOx

Minimum Rating
95.0 BHP

Compression Ratio
10.5:1

Aspiration
Naturally Aspirated

Rotation from Flywheel End
Counterclockwise

Flywheel and Flywheel Housing
SAE No. 1

Flywheel Teeth
156

Weight - Dry
2253.8 lb

Displacement
425.0 in³

Oil Change Interval
750

Ignition, Protection
ADEM™ A4

Air/Fuel Ratio Control
ADEM™ A4

Stroke
6.0 in

Bore
4.75 in

Length
46 in

Width
29 in

Capacity for Liquids

Cooling System
4.23 gal (US)

Lube Oil System - Refill
8.19 gal (US)

Equipment

Standard Equipment

Air Inlet System

  • Air cleaner — intermediate duty, dry
  • Air cleaner rain cap (shipped loose)
  • Service indicator

Control System

  • ADEM A4

Cooling System

  • Thermostats and housing — full open temperature 97°C (207°F)
  • Jacket water pump — gear-driven, centrifugal, non-self-priming

Exhaust System

  • Exhaust manifolds — watercooled
  • Exhaust elbow — dry 102 mm (4 in)
  • Three-way catalyst — 1.0 g and 0.5 g NOx catalyst options

Flywheels & Flywheel Housings

  • Flywheel, SAE No. 1
  • Flywheel housing, SAE No. 1
  • SAE standard rotation

Fuel System

  • Air/fuel ratio control
  • Gas pressure regulator
  • Requires 10.3-68.9 kPa (1.5-10 psi) gas
  • Natural gas carburetor

Ignition System

  • ADEM A4 ignition

Lube System

  • Crankcase breather, top mounted
  • Oil cooler
  • Oil filter
  • Oil pan, full sump
  • Oil filler and dipstick

Protection System

  • The following parameters include alarm and shutdown
Optional Equipment

Charging Alternator

  • 24V, 35A alternator
  • 24V, 35A CSA alternator*

Cooling System

  • Radiators
  • Jacket water pump inlet adapter

Exhaust System

  • Exhaust flex fitting — ANSI flange
  • Exhaust elbow
  • Catalyst harness
  • ANSI flange

Ignition System

  • CSA certified electronics and ignition*

Instrumentation

  • Operator interface panel
  • Operator interface panel enclosure
  • 15', 25' and 50' interconnect harness

Starting System

  • Air pressure regulator
  • Air start silencer
  • Vane starter
  • Electric starter
  • Turbine starter

Similar New Power Solutions

G3606 A4 Gas Engine
Gas Compression Engines

G3606 A4 Gas Engine

Maximum Rating: 2065 BHP
Rated Speed: 1000 rpm
Emissions: NSPS Site Compliant Capable with Customer-provided Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx

G3616 A4 Gas Compression Engine
Gas Compression Engines

G3616 A4 Gas Compression Engine

Maximum Rating: 5500 BHP
Rated Speed: 1000 rpm
Emissions: NSPS Site Compliant Capable with Customer-provided Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx

G3608 A4 Gas Compression Engine
Gas Compression Engines

G3608 A4 Gas Compression Engine

Maximum Rating: 2750 BHP
Rated Speed: 1000 rpm
Emissions: NSPS Site Compliant Capable with Customer-provided Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx

G3612 A4 Gas Compression Engine
Gas Compression Engines

G3612 A4 Gas Compression Engine

Maximum Rating: 4125 BHP
Rated Speed: 1000 rpm
Emissions: NSPS Site Compliant Capable with Customer-provided Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx

G3516J Gas Engine
Gas Compression Engines

G3516J Gas Engine

Maximum Rating: 1500 BHP
Rated Speed: 1400 rpm
Emissions: NSPS Site Compliant Capable with Customer-provided Aftertreatment, 0.3 g and 0.5 g/bhp-hr NOx

G3516 TA Gas Engine
Gas Compression Engines

G3516 TA Gas Engine

Maximum Rating: 1380 BHP
Rated Speed: 1400 rpm
Emissions: With Caterpillar supplied AFRC and Customer supplied .4% 02 Set point

G3520J Gas Compression Engine
Gas Compression Engines

G3520J Gas Compression Engine

Maximum Rating: 1725 BHP
Rated Speed: 1400 rpm
Emissions: With Customer Supplied Aftertreatment, .5 g/bhp-hr NOx

G3306B Gas Compression Engine
Gas Compression Engines

G3306B Gas Compression Engine

Maximum Rating: 211.0 BHP
Rated Speed: 1800 rpm
Emissions: With Caterpillar or Customer supplied AFRC & Aftertreatment, 0.1g and 0.5g/bhp-hr NOx

G3406 Gas Compression Engine
Gas Compression Engines

G3406 Gas Compression Engine

Maximum Rating: 325.0 BHP
Rated Speed: 1800 rpm
Emissions: 2% 02 Emissions Rating: Export Only

CG137-8 Gas Compression Engine
Gas Compression Engines

CG137-8 Gas Compression Engine

Maximum Rating: 400.0 BHP
Rated Speed: 1800 rpm
Emissions: NSPS Site Compliant Capable with Caterpillar-supplied or Customer-provided Aftertreatment, 0.5% O2 Set Point