Diesel Generator Sets

360° Exterior View (HTML)

Details

Prime Power Rating
600 kVA

Frequency
50 Hz

Emissions/Fuel Strategy
China Non-Road Stage III Certified

Contact

Foley Equipment Sales

+1 (316) 943-4211

Request a Quote

Overview

550 - 715 kVA Diesel Generator Set

The C18 diesel generator sets developed for critical, standby and prime applications. Producing reliable power from 550 to 715 kVA at 50 Hz, meeting ISO 8528-5 transient response requirements and built to accept 100 % rated load in one step. Certified for low fuel consumption, EU Stage IIIA Nonroad Emission Standards, China Nonroad III Emission Standards Emissions / Fuel Strategy.

Benefits

*Increased Standby rating at 50Hz

Footprint Reduction

Requires less space for installation

Control System

Track Genset Health and Operation Parameters
Genset Utilization and Performance Tracking

Features at a Glance

Cat Generator Set Package

Cat generator set packages have been fully prototype tested
Accepts 100% block load in one step and meets NFPA 110 loading requirements
Conform to ISO 8528-5 steady state and transient response requirements

Cat Diesel Engine

Reliable, rugged, durable design
Field-proven in thousands of applications worldwide
Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

A-Frame Alternator

Superior motor starting capability minimizes need for oversizing alternator
Designed to match performance and output characteristics of Cat diesel engines
Robust Class H insulation

GCCP 1.3 Control Panel

User-friendly interface and navigation
Scalable system to meet a wide range of installation requirement
Expansion modules and site-specific programming for specific customer requirements

Cooling System

Designed to operate in standard ambient temperatures up to 55°C (131°F)
Contact your Cat Dealer for specific ambient and altitude capabilities

Certifications

One Safe Source

Components used in the generator set are selected based on seamless design integration to provide the optimum performance
The generator set is fully assembled at a Caterpillar facility following our quality guidelines
Each generator set package is tested before leaving the Caterpillar facility
Cat product support, including dealer service, parts and warranty covers the entire Cat power system

World Wide Product Support

Cat dealers have over 1,800 dealer branch stores operating in 200 countries
Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

Specifications

Full Specifications

Generator Set Specifications: Prime Power Rating
600 kVA

Frequency
50 Hz

Emissions/Fuel Strategy
China Non-Road Stage III Certified

Voltage
380 to 415 Volts

Speed
1500 rpm

Duty Cycle
Prime

Engine Specifications: Engine Model
C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel

Bore
5.71 in

Stroke
7.2 in

Displacement
1106.4 in³

Compression Ratio
14.5:1

Aspiration
Air to Air Aftercooled

Fuel System
Electronic unit injection

Governor Type
Adem™A4

Generator Set Dimensions: Length - Minimum
218.5 in

Length - Maximum
218.5 in

Width - Maximum
80.9 in

Height - Maximum
107.8 in

Equipment

Standard Equipment

Air System

Air cleaner, light duty
Turborcharger

Air Inlet

Air cleaner

Control Panel

GCCP 1.3
GCCP Genset Controller

Cooling

Package mounted radiator

Cooling System

Coolant drain line with valve
Fan drive, battery charging alternator drive
Radiator and cooling fan with guard
Caterpillar extended life coolant

Exhaust

Exhaust flange outlet

Exhaust System

Stainless steel exhaust flex, gaskets, raincap and SAE exhaust flange for customer use - shipped loose

Fuel System

Standard open set fuel tank/base supplied Base, formed steel with single wall integral 8-hour fuel tank

Fuel

Fuel priming pump
Secondary fuel filters
Primary fuel filter with integral water separator

Generator

Matched to the performance and output characteristics of Cat engines
IP23 Protection
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time

Generator and Attachments

Segregated low voltage (AC/DC) wiring panel
Power center, IP22
Optional LC Frame generator - IP23 Protection,
Mandatory option rear circuit breaker, IEC, 3 pole, mounted in power center
Integrated voltage regulator (IVR)
A Frame generator - IP21 Protection

Governing System

Cat electronic governor (ADEM A4)

Power Termination

Busbar

Lube System

Oil drain valves
Lubricating oil

Mounting System

Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines

Starting / Charging

24 Volt battery with rack and cables

Starting/Charging

24 volt starting motor
Batteries

Mounting

Rubber vibration isolators

General

Engine and alternator pre-paint, Caterpillar yellow
Paint - Caterpillar yellow except rails and radiators gloss black

Optional Equipment

Certifications

Global
European Certifications - EU Certificate of Conformance (CE)

Exhaust

Industrial, residential, critical mufflers

Air Inlet System

Dual element air cleaner
Single element air cleaner

Generator

Oversize and premium generators
Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
Anti-condensation heater

Power Termination

Circuit breakers, IEC compliant
Circuit breakers, UL listed

Circuit breakers

4 Pole (IEC-100% rated) - package mounted
3 Pole (IEC-100% rated) - package mounted
Padlockable device
4 Pole (IEC-100% rated) - motorized
Power terminal strip
3 Pole (IEC-100% rated) - motorized

Control Panel

GCCP 1.4

Control Panels

Local & remote annunciator modules
Digital I/O module
Load share module
EMCP (4.2) (4.3) (4.4)
Remote monitoring software

Control System

Local alarm modules
Control panel protective devices
Remote annunciator module
Volt free contacts

Cooling System

Radiator duct flange

Enclosures

Sound attenuated enclosures

Starting/Charging

Heavy duty starting system
Battery chargers
Charging alternator
Oversize batteries
Jacket water heater

Exhaust System

Elbow Kit
Mufflers - End in/end out
Manifold and turbocharger guards
Engine mounted muffler
Flange groups; 8 and 10 inch weld flanges and gaskets

Fuel System

Optional BS799 Compliant Integral dual wall fuel tank base
Manual fuel transfer system
Fuel transfer system

General

Integral & sub-base UL listed dual wall fuel tanks
UL 2200 package
Narrow, wide or skid base
Enclosures: Sound attenuated, weather protective
Sound attenuated, weather protective or high ambient weather protective enclosure
EEC Declaration of Conformity
Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
The following options are based on regional and product configuration:
Single or dual wall sub-base fuel tanks
Automatic transfer switches (ATS)
CSA Certification
EU Certificate of Conformance (CE)
Single or dual wall integral fuel tanks