Diesel Generator Sets

360° Exterior View

Virtual Product Tour

Details

Standby Rating
3365(no fan)/3250/3100(no fan)/3000 ekW

Prime Power Rating
3115(no fan)/3000/2825(no fan)/2725 ekW

Emissions/Fuel Strategy
Low Fuel, Tier 2

Contact

Foley Equipment Sales

+1 (316) 943-4211

Request a Quote

Overview

2500 - 3365 ekW Diesel Generator Set

Producing reliable power from 2500 - 3365 ekW at 60 Hz, our C175-16 diesel generator sets are made to meet your mission critical, continuous, standby and prime applications. We've designed each to ISO 8528-5 transient response requirements and to accept 100% rated load in one step. The generator set is Low Fuel Consumption, U.S. EPA Certified for Stationary Emergency Use Only (Tier 2 Nonroad Equivalent Emission Standards) certified.

Benefits

Operating hours

at Global locations

units

In the field

Product

Available on the market

Features at a Glance

Cat Generator Set Package

Cat generator set packages have been fully prototype tested
Accepts 100% block load in one step and meets NFPA 110 loading requirements
Conform to ISO 8528-5 steady state and transient response requirements

Cat Diesel Engine

Reliable, rugged, durable design
Field-proven in thousands of applications worldwide
Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

SR5 Alternator

Superior motor starting capability minimizes need for oversizing alternator
Designed to match performance and output characteristics of Cat diesel engines
Robust Class H insulation

Cat ECS Control Panel

User-friendly interface and navigation
Scalable system to meet a wide range of installation requirement
Expansion modules and site-specific programming for specific customer requirements

Cooling System

Designed to operate in standard ambient temperatures up to 50°C (122°F)
Contact your Cat Dealer for specific ambient and altitude capabilities

Certifications

UL 2200 Listed
CSA
IBC seismic certification
OSHPD pre-approval

One Safe Source

Components used in the generator set are selected at the design stage to provide optimum package performance
The generator set is fully assembled at a Caterpillar facility following our quality guidelines
Each generator set package is tested before leaving the Caterpillar facility
Cat product support, including dealer service, parts and warranty covers the entire Cat power system

Worldwide Product Support

Cat dealers have over 1,800 dealer branch stores operating in 200 countries
Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements

Specifications

Full Specifications

Generator Set Specifications: Standby Rating
3365(no fan)/3250/3100(no fan)/3000 ekW

Prime Power Rating
3115(no fan)/3000/2825(no fan)/2725 ekW

Emissions/Fuel Strategy
Low Fuel, Tier 2

Voltage
480 to 13800 Volts

Frequency
60 Hz

Speed
1800 RPM

Duty Cycle
Standby, Mission Critical, Prime, Continuous

Maximum Rating
3365 ekW

Minimum Rating
2500 ekW

Engine Specifications: Engine Model
C175-16 SCAC, V-16, 4-Stroke Water-Cooled Diesel

Bore
6.89 in

Stroke
8.66 in

Displacement
6456.31 in³

Compression Ratio
16.7:1

Aspiration
Turbo Aftercooled

Fuel System
Common Rail

Governor Type
ADEM� A4

Generator Set Dimensions: Length - Minimum
250.9 in

Length - Maximum
330.6 in

Width - Minimum
82.7 in

Width - Maximum
124.3 in

Height - Minimum
86.9 in

Height - Maximum
134.2 in

Dry Weight - Genset (minimum)
42750 lb

Dry Weight - Genset (maximum)
57774 lb

Equipment

Standard Equipment

Air Inlet System

4 x Single element canister with service indicator(s).

Control Panel

2 Programmable relay outputs (Form C)
Low coolant level
Over/under voltage
Coolant temperature
Serial annunciator module data link
Alarm acknowledge
Text alarm/event descriptions
Volts (L-L & L-N)
Reverse power
Over/under frequency
Environmental sealed front face
Programmable protective relaying functions
Speed adjust
Generator phase sequence
Low coolant temperature
Generator mounted - rear facing
Overspeed
Controls
Frequency (Hz)
Engine cycle crank
Engine cool-down timer
Warning/shutdown Indicators:
Lamp test
2 Programmable digital outputs
6 Programmable digital inputs
High coolant temperature
Customer data link (Modbus RTU)
Auto/start/stop control
Emergency stop pushbutton
RPM
Digital Indicators
Communications
Accessory module data link
Oil pressure (psi, kPa or bar)
Low oil pressure
Overcurrent
Emergency stop
24 Volt DC operation
4 Programmable relay outputs (Form A)
Failure to start (overcrank)
True RMS AC metering, 3-phase, +/-2% accuracy
Power factor (per phase & average)
Operating hours
DC volts
Amps (per phase & average)
Cat ECS 100
Reverse reactive power

Exhaust System

Bolted flange, with bellow for each turbo
Exhaust flange outlet

Fuel System

Engine mounted filters #REF!
Filters x 3
10 Micron spin on yype
Secondary/tertiary fuel filters
4 Micron spin on type
Primary fuel filter water/fuel water separator

Generators and Attachments

Right side extension box, bottom cable entry
IEC platinum stator RTDs
Reactive droop capability
3 Phase voltage sensing
(MV) Busbar connections, right side extension box, bottom cable entry
Class F temperature rise at 40C ambient
Anti-condensation space heater
NEMA Class H insulation
6 Leads
Class H temperature rise at 40C ambient
Voltage regulator
Exciter diode monitor
Form wound
RFI suppression
(LV) Busbar connections, top/center mounted, top cable entry
3 Phase brushless
60 Hz models: NEMA standard hole pattern
Permanent magnet excitation (PMG)
Min / max exciter limiter
Salient pole

Governing System

Redundant shutdown (Overspeed protection through a duplicate speed sensing system)
ADEM A4

Lube System

Oil filter, filler and dipstick
Integral lube Oil cooler
Oil drain lines and valve
Fumes disposal
Lubricating oil
Prelube - required with prime, continuous, and standby
Gear type lube oil pump

Mounting Systems

Rails - Engine/generator
Rubber anti-vibration mounts - shipped loose
Dual 24 volt electric starting motors
Battery disconnect switch
Batteries and battery rack w/cables

Power Termination

Busbar

Service Instructions

Two PM inspections

General

Paint - Caterpillar yellow with high gloss black rails & radiator
SAE standard rotation
LH Service
Flywheel and flywheel housing-SAE No. 00

Optional Equipment

Air Inlet System

Air inlet adapters
Dual element air cleaner
Single element air cleaner
Air inlet protection

Control Panel

Package mounted radiator
Automatically selected ground
Customer AC-DC connection mounting location - LV/MV
Load share governor
EMCP 4.4
E-Stop
Frame boxes
Annunciator modules
Load share module / auxiliary plate and auxiliary box (LV)
Fuel cooler
Controller mounting location - LV/MV
Modbus monitoring of packages
Customer interface options
EMCP 4.4 optional harness
Controller voltage and current sensing groups
Remote radiators
Generator harness
Interconnect harness
Speed adjust
Controller and MV and HV power connection locations
Raise lower switch

Crankcase Systems

Explosive relief valves
Crankcase ventilation system

Exhaust System

Mufflers
Exhaust support group
Weld flanges
Exhaust collectors/manifold
Front housing - Prime or continuous
Front housing - Standby or mission critical
Aftercooler drain

Fuel System

Primary fuel filter

Generators and Attachments

Low voltage - 1800 and 3000 Frames - 60 Hz, 3 phase, 1800 rpm, FW, PM, No of leads=6, Pitch 0.6667
Medium voltage - 1800 and 3000 Frames - 60 Hz, 3 phase, 1800 rpm, FW, PM, No of leads=6, Pitch 0.6667
Conversion GP - Top cable entry
Low voltage - 1800 and 3000 Frames - 50 Hz, 3 phase, 1500 rpm, FW, PM, No of leads=6, Pitch 0.6667
Differential current transformers
Space heater kit
Medium voltage - 1800 and 3000 Frames - 50 Hz, 3 phase, 1500 rpm, FW, PM, No of leads=6, Pitch 0.6667
Thermostat for space heater
Generator air intake

Instrumentation