www.foleyeq.com

Cat® CBS – ATS with Bypass Isolation (Spec Grade)

ATS TruOne - TruControl

Details

Rating Range
100 - 3000 A

Transfer Type
Open Transition (CBS), Delayed Transition (CBSD), Closed Transition (CBSCT), with Bypass Isolation

Switch Type
Contactor

Contact

Foley Equipment Sales

+1 (316) 943-4211

Request a Quote

Overview

Cat® CBS Series

The CBS Series – Open Transition, Delayed Transition (CBSD), Closed Transition (CBSCT), ATS with Bypass Isolationis is equipped with an intuitive full-color touchscreen HMI and is compatible with Ekip Connect software for commissioning and operation.

The CBS Series has an array of standard programmable functions and is built for high performance and service with proactive outage mitigation that monitors temperature and contact health. Fast switching and no line voltages connected at the door provide advanced safety.

Benefits

HMI unit, type CBS color touchscreen with Ekip Programming module

Contact wear monitoring including real-time status and predicted contact end-of-life

Advanced safety with fast switching (<50ms) and no line voltages connected at the door

Features at a Glance

Product Features
        
  • Advanced safety with faster switching and no line voltages connected at the door
    •     
  • Voltage and frequency sensing of both sources and load
    •     
  • USB port to upload/download settings
    •     
  • Available Bluetooth connection and enhanced communication capabilities
    •     
  • Password protection color touchscreen HMI
    •     
  • Integrated help button and menu
    •     
  • Five programmed packages and IO
    •     
  • Contact wear monitoring including real-time status and predicted contact end-of-life
    •     
  • Fast controller response to outage recovery and fast switching (<50ms)
Control Panel
        
  •     
    •     
  • TruOne L4 - color touchscreen HMI compatible with Ekip Connect software, with standard programmable functions and IO, and fast controller response to outage recovery and fast switching (<50ms).
Functions
        
  • High current protection and alarm
    •     
  • Wide 200-480V range with auto-configuration of system settings for 100-1200A range
    •     
  • High time-based withstand and closing ratings (WCR)
    •     
  • Short-time withstand ratings in every frame (CBS, CBSD, and CBSCT models)
Standards
        
  •     
    •     
  • UL 1008, NFPA 70, 99, 101 and 110
    •     
  •     
    •     
  • NEMA ICS 10
    •     
  •     
    •     
  • cUL
    •     
  •     
    •     
  • Conducted and radiated emissions - CISPR 11:2009, Class A
    •     
  •     
    •     
  • ESD immunity test - IEC/EN 61000-4-2 Class B
    •     
  •     
    •     
  • Radiated RF, electromagnetic field immunity test - IEC/EN 61000-4-3 10 V/m
    •     
  •     
    •     
  • Electrical fast, transient/burst immunity test - IEC/EN 61000-4-4
    •     
  •     
    •     
  • Surge immunity test - IEC/EN 61000-4-5 0.5 to 2 kV
    •     
  •     
    •     
  • Conducted immunity test - IEC/EN 61000-4-6
    •     
  •     
    •     
  • Voltage dips and interruption immunity - IEC/EN 61000-4-11
    •     
  •     
    •     
  • Harmonic voltage immunity test - IEC/EN 6100-4-13

Specifications

Full Specifications

Technical Summary

Rating Range
100 - 3000 A

Transfer Type
Open Transition (CBS), Delayed Transition (CBSD), Closed Transition (CBSCT), with Bypass Isolation

Switch Type
Contactor

System Information

Product nodes
UL: Open transition 100-3000A, Delayed transition 100-3000A, Closed transition 1000-3000A

Rated Voltage and Frequency
200-480VAC, 50/60 Hz

Phase system
Single and Three

Number of poles
2, 3 and 4

Neutral configuration
Solid neutral, Switched neutral, Overlapping neutral (100-1200A only)

Product type
Open transition (I-II), Delayed Transition (I-O-II), Closed transition (I-O-II)

Equipment

Standard Equipment

Control

  • Color touchscreen
  • Voltage and frequency settings: Pick up and Drop out
  • Time Delay Settings: Override momentary, Transfer, Generator stop, Center-OFF (Delayed Transition Type), Pre-transfer, Post-transfer, Elevator Pre-signal, Elevator Post-signal, and Load shead.
  • Source failure detections: No Voltage, Under/Over Voltage, Phase missing, Voltage unbalance, Invalid frequency, and Incorrect phase sequence

Additional Features

  • LED indications for ATS, S1 and S2 status
  • Programmable digital inputs/outputs
  • Auto config (voltage, frequency, phase system)
  • Source priority (Source 1/2, No priority)
  • Manual re-transfer
  • In-phase monitor (synchro check)
  • Genset exercising: on-load, off-load
  • In-built power meter module
  • Load shedding
  • Real time clock
  • Event log
  • Predictive maintenance
  • Voltage and current harmonics measuring

Accessories

  • Auxiliary contacts for position indication
  • Digital input/output modules (factory programmed)
  • 12-24 VDC aux supply module for controller
  • Communication modules

Connectivity Capability

  • Modbus RTU (RS-485)
  • Modbus/TCP
  • Profibus DP
  • ProfiNet Yes
  • DeviceNet
  • Ethernet IP

Applications

  • Utility - Utility
  • Utility - Generator

UL short circuit withstand ratings

  • Coordinated breaker WCR
  • Time-based WCR
  • Short-time ratings
Optional Equipment

Options

  • Options not available

Resources

CBS - ATS (Spec Grade)

Rating Guide

Similar New Power Solutions

Cat® CS – ATS (Spec Grade)
ATS TruOne - TruControl

Cat® CS – ATS (Spec Grade)

Rating Range: 30 - 3000 A
Transfer Type: Open Transition (CS), Delayed Transition (CSD), Closed Transition (CSCT)
Switch Type: Contactor

Cat® CG – ATS for general purpose applications
ATS TruOne - TruControl

Cat® CG – ATS for general purpose applications

Rating Range: 30 - 3000 A
Transfer Type: Open Transition (CG), Delayed Transition (CGD)
Switch Type: Contactor