Industrial Diesel Engines

360° Exterior View (HTML)

Details

Maximum Power
580 hp

Maximum Torque
1958 lb-ft @ 1400 rpm

Emissions
U.S. EPA Tier 4 Final

Contact

Foley Equipment Sales

+1 (316) 943-4211

Request a Quote

Overview

The Cat^® C15 Industrial Diesel Engine is offered in ratings ranging from 354-433 bkW (475-580 bhp) @ 1800-2100 rpm. Industries and applications powered by C15 engines include: Agriculture, Ag Tractors, Aircraft Ground Support, Bore/Drill Rigs, Chippers/Grinders, Combines/Harvesters, Compactors/Rollers, Compressors, Construction, Cranes, Crushers, Dredgers, Forestry, General Industrial, Hydraulic Power Units, Irrigation Equipment, Loaders/Forwarders, Material Handling, Mining, Mobile Earthmoving Equipment, Paving Equipment, Pumps, Shovels/Draglines, Surface Hauling Equipment and Trenchers.

Features at a Glance

Installation: The Cat C15 offers a fully-configurable engine across a wide range of power nodes, flexible aftertreatment mounting options and the ability to install the engine's IPU straight from the factory, so OEMs can keep installation time and costs to a minimum.

Advanced Features: With transparent regeneration technology built into every Cat C15, operators can continue to be productive without ever having to wait. The C15 also features a 5,000-hour DPF service interval and DEF capacity of 93.7 liters, giving machine operators the opportunity to spend more time on the job site and less time in the shop.

Ideal Applications: Industrial, agricultural and construction applications such as: Compressors • Trenchers • Chippers • Grinders • Irrigation equipment • Bore rigs • Drill rigs • Pumps • Hydraulic power units

Total Cost of Ownership: Operators know the true costs of owning an engine goes beyond the rough and reliable exterior. That's why the Cat C15 was developed to optimize fluid consumption based on a wide range of operating cycles and applications. And with 500-hour maintenance intervals, owners can keep parts and service costs low.

Cat Dealer Product Support: Say goodbye to complicated service routines and start enjoying scheduled maintenance and worldwide dealer support with the Cat C15. Not only does the engine come with a warranty, it’s also backed by the Cat dealer support network across 192 countries. See your Cat dealer for details.

Safety: Each Cat C15 features a clean emissions module that uses DOC, DPF and SCR technologies to keep the engine running cleaner, longer. Besides, cleaner air isn't just good for the engine, it's also a win for the environment and makes for safer working conditions.

Specifications

Full Specifications

Power Rating: Maximum Power
580 hp

Maximum Torque
1958 lb-ft @ 1400 rpm

Rated Speed
1800-2100 rpm

Minimum Power
475 hp

Emission Standards: Emissions
U.S. EPA Tier 4 Final

General: Engine Configuration
In-Line 6

Bore
5.4 in

Stroke
6.7 in

Displacement
927.6 in³

Compression Ratio
17.0:1

Aspiration
Turbocharged-Aftercooled (TA)

Combustion System
Direct Injection

Rotation from Flywheel End
Counterclockwise

Aftertreatment
DOC+DPF+SCR

Engine Dimensions - Approximate: Length
56.6 in

Width
38.1 in

Height
49.1 in

Weight - Net Dry - Basic Operating Engine Without Optional Attachments
3673 lb

Aftertreatment Dimensions: Length
45.4 in

Width
43.8 in

Height
25.7 in

Weight
600 lb

Aftertreatment Dimensions*: Diameter
14 in

PETU Dimensions - Tier 4 Final Only: Length
33.6 in

Width
11.3 in

Height
21.7 in

Weight
42.8 lb

Volume Capacity
51.1 qt (US)

Equipment

Standard Equipment

Air Inlet System

Turbocharged
Air-to-Air Aftercooled
Mid-mount turbocharged system with front and rear exhaust configurations (Tier 4 Final, Stage IV)

Control System

Electronic control system
Over-foam wiring harness
Automatic altitude compensation
Power compensated for fuel temperature
Configurable software features
Engine monitoring system SAE J1939 broadcast and control
Integrated Electronic Control Unit (ECU)
Remote fan control

Cooling System

Thermostats and housing, vertical outlet
Centrifugal water pump
Guidance on cooling system design available through your dealer to ensure equipment reliability

Flywheels and Flywheel Housing

Choice of SAE No. 0 or SAE No. 1 flywheel housing
Available SAE No. 1 power take off with optional SAE A, SAE B or SAE C power take off drives. Engine power can also be taken from the front of the engine with optional attachments. (Tier 4 Final, Stage IV).

Fuel System

MEUI injection
Primary fuel filter
Secondary fuel filters
Fuel transfer pump
Electronic fuel priming

Lube System

Open crankcase ventilation system
Oil cooler
Oil filler
Lube oil filter
Oil dipstick
Gear driven oil pump
Choice of front, rear or center sumps
Open crankcase ventilation system with fumes disposal (optional OCV filter system) (Tier 4 Final, Stage IV)

Power Take Off (PTO)

SAE A, SAE B or SAE C power take off (PTO) drives. Engine power can also be taken from the front of the engine on some applications.

General

Paint: Caterpillar yellow, with optional colors available at request

U.S. EPA Tier 4 Interim, EU Stage IIIB Aftertreatment / Clean Emissions Control Equipment

Cat Regeneration System
Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
NOx Reduction System (NRS)
Flex pipe connection kit with 90° rotatable elbows to attach to Cat Regeneration System Inlet
Available in 12 volt or 24 volt systems

U.S. EPA Tier 4 Final, EU Stage IV Aftertreatment

Cat Regeneration System
Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
Aftertreatment Electronic Control Unit (ECU)
NOx Reduction System (NRS)
Pump Electronic Control Unit (PETU)
Selective Catalytic Reduction (SCR)
Available in 12V or 24V systems