TH53-E60 Transmission

Well Service Transmissions

Details

Gross Input Power
2500.0 BHP

Gross Peak Input Torque
8914.0 ft-lb

Rated Input Speed
1900.0 r/min

Contact

Foley Equipment Sales

+1 (316) 943-4211

Request a Quote

Overview

Your operation depends on the power driving it. And your transmission is as crucial to your power solution as the engine. Cat transmissions are proven in the oil and gas industry and widely known for their exceptional power, leading durability, ease of operation, and shifting options.TH53-E60 transmissions are ideal for pressure pumping applications. TH53-E60 transmissions are optimized for use with Cat 3512C (HD) and Cat 3512E (HD) engines. Cat transmissions are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty. Cat TH53-E60 oilfield transmission. Gross input power: 1864 bkW (2500 bhp).

Specifications

Full Specifications

Transmission Specifications

Gross Input Power
2500.0 BHP

Gross Peak Input Torque
8914.0 ft-lb

Rated Input Speed
1900.0 r/min

Gears
6F/0R

1F Gear Ratio
4.54

2F Gear Ratio
3.33

3F Gear Ratio
2.99

4F Gear Ratio
2.46

5F Gear Ratio
2.20

6F Gear Ratio
1.62

Equipment

Standard Equipment

Cat Engines for Optimized Power Train

  • Cat 3512C (HD)
  • Cat 3512E (HD)

Transmission Rotation

  • Input rotation — counterclockwise
  • Output rotation — counterclockwise(as viewed from rear)

Torque Converter

  • Factory installed torque converter
  • Series — TC58733-ESLF
  • Stall torque ratio — 2.30

Clutches

  • Clutches — electro-hydraulic fully modulated, oil cooled, multidisc
  • Clutch modulation control — Cat Electronic Clutch Pressure Control (ECPC)

Installation Connections

  • 2 cooler
  • 1 electrical

Oil System

  • Cat Transmission/Drive Train Oil-4 (TDTO)
  • Oil temperatures continuous - 80°C (195°F)
  • Hydraulic Fill Capacity — Approx. 108L (28.5 gal), 104 L (27.5 gal) initial fill; 87 L (23 gal) refill; subject to cooler size, lines, and installation
  • Filter Type — 6 micron synthetic, cartridge remote mount

Mountings

  • Input connection (flywheel) — SAE #0
  • Output connections (yoke) - GWB 390.65, GWB 390.60
  • Structural application subject to Caterpillar approval

Control System

  • Electronic Control Unit (ECU)
  • Electronic data link, SAE J1939
  • Electrical system 24V

Power Take-Off Drives

  • Mounting Type: J704 SAE Bolt, Location: 12 o’clock, Rated Power: 150HP @1900RPM
  • Mounting Type: J744 SAE C, Location: 10 o’clock, Rated Power: 150HP @1900RPM

Similar New Power Solutions

CX31-P600 Well Service Transmission
Well Service Transmissions

CX31-P600 Well Service Transmission

Gross Input Power: 600.0 BHP
Gross Peak Input Torque: 2025.0 ft-lb
Rated Input Speed: 2100.0 r/min

CX35-P800 Oilfield Transmission
Well Service Transmissions

CX35-P800 Oilfield Transmission

Gross Input Power: 800.0 BHP
Gross Peak Input Torque: 2700.0 ft-lb
Rated Input Speed: 2100.0 r/min

CX48-P2300 Oilfield Transmission
Well Service Transmissions

CX48-P2300 Oilfield Transmission

Gross Input Power: 2300.0 BHP
Gross Peak Input Torque: 6656.0 ft-lb
Rated Input Speed: 1900.0 r/min

TH48-E70 Oilfield Transmission
Well Service Transmissions

TH48-E70 Oilfield Transmission

Gross Peak Input Torque: 4422.0 ft-lb
Rated Input Speed: 2100.0 r/min
Maximum Turbine Torque: 7442.0 ft-lb

TH55-E70 Oilfield Transmission
Well Service Transmissions

TH55-E70 Oilfield Transmission

Gross Input Power: 3300.0 BHP
Gross Peak Input Torque: 9350.0 ft-lb
Rated Input Speed: 1900.0 r/min

TH55-E90 Oilfield Transmission
Well Service Transmissions

TH55-E90 Oilfield Transmission

Gross Input Power: 3300.0 BHP
Gross Peak Input Torque: 9350.0 ft-lb
Rated Input Speed: 1900.0 r/min