Foley Equipment Contact

2014 MASABA N/A

Loading...

SCREENS

Price: $620,000
Hours: 10
Catalog Number: 1067042
Serial Number: 129074
Location: PASCO, WA
Rating: FAIR

Contact Info
Foley Equipment
Phone: (316) 943-4211
Email Us
Make Offer

Condition

New
New
Very Good
Very Good
Good
Good
Fair
Fair
Poor
Poor

GENERAL APPEARANCE

Cleaning Required Yes
Covers Poor
DOOR AND COVER ON HYDRAULIC TANK ARE BROKEN. COVER FOR LOWER PULLEY RUBBED THROUGH.
Engine Compartment Good
Paint Good
PAINT HAS CUTS,SCUFFS AND RUST
Decal Appearance Good
DECALS ARE LEDGIBLE.

ENGINE

Oil Level Poor
PONY MOTOR OIL IS OVER FULL. OIL SMELLS LIKE GAS.
Starter Poor
BATTERY IS DEAD.
Air Filter Poor
AIR FILTER NEEDS CLEANED
Leaks? No

ELECTRICAL, STARTING AND CHARGING SYSTEM

Error Codes No - UNABLE TO CHECK FOR ERROR CODES DURING INSPECTION
Start / Stop System Fair
ALL BUTTONS AND SWITCHES EXCEPT LOWER CONVEYOR SWITCH MOVE FREELY. ALL LABELING IS LEGIBLE. UNABLE TO TEST DURING INSPECTION.
Wiring Good
WIRING SHOWS NO DAMAGE. UNABLE TO TEST DURING INSPECTION.
Motion Alarm Good
UNABLE TO CHECK START ALARM DURING INSPECTION.
Gauges Good
GAUGES SHOW NO DAMAGE .UNABLE TO TEST DURING INSPECTION.

CHIPPER / FEED SYSTEM

Feed Hopper Fair
HOPPER IS IN GOOD CONDITION. HOPPER PLATE IS RUBBED THROUGH.
Hopper Wings Good
HOPPER WINGS ARE IN GOOD CONDITION,

SHAKER HEAD

Notes UNABLE TO TEST OPERATION OF SHAKER BOX DURING INSPECTION.
Shaker Mounting Good
SPRINGS HAVE NO LOOSE HARDWARE. UNABLE TO TEST DURING INSPECTION
Shaker Gear Box Good
GEAR BOX HAS NO LEAKS. FLUID LEVEL WAS FULL IN SIGHT GLASS.
Side Plates Poor
MISSING ADJUSTER BOLTS ON BOTH SIDES OF SHAKER BOX.

HYDRAULICS

Oil Leaks? No
Pump Good
PUMP SHOWS NO DAMAGE. NO LEAKS FOUND DURING INSPECTION TO TEST DURING INSPECTION.
Oil Levels Poor
OIL LEVEL WAS FULL ON BOTH TANKS. FOUND THAT ACCESS DOOR ON LEFT SIDE TANK OF UNIT WAS OPEN. OIL COULD BE CONTAMINATED . WOULD HAVE TO FLUSH TANK AND CHANGE FILTER.
Filter Poor
OIL COULD BE CONTAMINATED WOULD HAVE TO CHANGE FILTER
Tilt Cylinder Good
Controls Good
CONTROLS SHOW NO DAMAGE OR LEAKS. UNABLE TO TEST DURING INSPECTION.
Motor Good
MOTOR SHOWS NO DAMAGE.UNABLE TO TEST DURING INSPECTION.
Conveyor Cylinders Good
NO LEAKS FOUND DURING INSPECTION. ALL HARDWARE IS TIGHT. UNABLE TO TEST DURING INSPECTION.

CONVEYORS

Feed Conveyor Frame/Bed Good
Feed Conveyor Pulleys Good
Lift Conveyor Belt Good
Main Conveyor Pulleys Poor
LOWER PULLEY IS BENT,TWISTED AND RIPPED. MISSING BEARING FOR PULLEY. MISSING PILLOW BLOCK.
Main Conveyor Frame/Bed Good
FOUND NO APPARENT CRACKS IN FRAME.
Feed Conveyor Rollers Good
Lift Conveyor Frame/Bed Good
Main Conveyor Belt Poor
BELT IS BROKEN.
Feed Conveyor Belt Fair
BELT HAS CUT IN CENTER AND ROCK STUCK IN BELT.
Lift Conveyor Rollers Poor
ROLLERS ARE MISSING. ROLLER FRAME IS BENT.MISSING SECTION ON RUBBER SUPPORT ROLLER
Main Conveyor Rollers Poor
ROLLER BROKE FREE FROM ATTACHMENT POINT.
2 Side Conveyor Frame/Bed Good
2 Side Conveyor Belt Good
1 Side Conveyor Rollers Poor
TWO CENTER ROLLERS HAVE DAMAGE.
1 Side Conveyor Frame/Bed Good
1 Side Conveyor Pulleys Good
Lift Conveyor Pulleys Poor
PULLEY GEAR BOX SEEPING FROM BREATHER.
1 Side Conveyor Belt Poor
BELT HAS MULTIPLE REPAIRS.
2 Side Conveyor Rollers Good
2 Side Conveyor Pulleys Good

CHASSIS

Cracks Yes - TAG AXLE GUARD IS BENT AND HAS A CRACK IN WELD.CROSS SUPPORT BENT AND TWISTED. GUARD FOR LOWER PULLEY BENT AND TWISTED.