C18 ACERT Tier 4 Final

Land Drilling Engines and Generator Sets

Details

Maximum Rating
800.0 BHP

Emissions
U.S. EPA Non-road Tier 4 Final

Displacement
1104.0 in³

Contact

Foley Equipment Sales

+1 (316) 943-4211

Request a Quote

Overview

Cat C18 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C18 ACERT engines to deliver excellent performance with low operating costs while meeting tight environmental requirements.This is an ideal engine for applications that require Tier 4 Final or EU Stage IV emissions certifications land mechanical drilling equipment such as mud pumps. Cat engines are backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty.Cat C18 ACERT Diesel Engine. Ratings: 429-470 bkW (575-630 bhp)@ 2000 rpm are designed to meet U.S. EPA Tier 4 Final, EU Stage IV emission standards. Ratings 563-597 bkW (755-800 bhp) @ 1800 rpm are designed to meet U.S. EPA Tier 4 Final emission standards.

Features at a Glance

Emissions
- Designed to meet U.S. EPA Tier 4 Final emissions requirements. - On-engine NOx reduction system with optimized piston, ring, liner, and fuel system configuration to reduce NOx while minimizing in-cylinder sooting- Aftertreatment features diesel oxidation catalyst- Meets Tier 4 Final emissions requirements four years early, achieving environmental benefits earlier than required
Engine Design
- Proven reliability and durability- Broad operating speed range- High power density- PTO drive options provide flexible access to auxiliary power for pumps and other needs
Low Total Cost of Ownership
- Maintenance-free aftertreatment- Optimized fuel consumption- 250- to 500-hour oil change intervals enable low maintenance costs
Advanced Digital Engine Management
ADEM A4 control system providing integrated ignition, speed governing, protection, and controls, including detonationsensitive variable ignition timing. ADEM A4 has improved: user interface, display system, shutdown controls, and system diagnostics.
Custom Packaging
For any petroleum application, trust Caterpillar to meet your exact needs with a factory custom package. Cat engines, generators, enclosures, controls, radiators, transmissions, aftertreatment solutions — anything your project requires — can be custom designed and matched to create a one-of-a kind solution. Custom packages are globally supported and are covered by a one-year warranty after startup.
Fuel & Oil
Requires Ultra Low Sulfur Diesel (ULSD) containing a maximum of 15 ppm sulfur, and new oil formulations to support the new technology. Designed to accommodate B20 biofuel.
Transmissions
- Caterpillar has a full line of engine-transmission packages that can be fully integrated with your axle, hydraulics, and operator interface.- C18 ACERT™ Caterpillar optimized transmission matches: CX35-P800
Product Support Offered Through Global Cat Dealer Network
- More than 2,200 dealer outlets- Cat factory-trained dealer technicians service every aspect of your petroleum engine- Cat parts and labor warranty- Preventive maintenance agreements available for repair-beforefailure options- S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine:- Internal engine component condition- Presence of unwanted fluids- Presence of combustion by-products- Site-specific oil change interval
Over 80 Years of Engine Manufacturing Experience
Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.- Cast engine blocks, heads, cylinder liners, and flywheel housings- Machine critical components- Assemble complete engine
Web Site
For all your petroleum power requirements, visit www.cat.com/oilandgas.

Specifications

Full Specifications

Engine Specifications

Maximum Rating
800.0 BHP

Emissions
U.S. EPA Non-road Tier 4 Final

Displacement
1104.0 in³

Minimum Rating
755.0 BHP

Bore
5.7 in

Stroke
7.2 in

Rated Speed
1800.0 r/min

Aspiration
Turbocharged-Aftercooled

Governor and Protection
ADEM A4

Engine Weight - Net Dry
3482.0 lb

Oil Change Interval
250 - 500

Rotation from Flywheel End
Counterclockwise

Flywheel and Flywheel Housing
SAE No. 0 or SAE No. 1

Flywheel Teeth
136 (SAE 0), 113 (SAE 1)

Capacity for Liquids

Minimum Cooling System - Engine Only
7.1 gal (US)

Dimensions

Length
60.2 in

Width
37.8 in

Height
50.5 in

Equipment

Standard Equipment

Air Inlet System

  • Turbocharged Aftercooled

Control System

  • Electronic control system, over-foam wiring harness, automatic altitude compensation, power compensated for fuel temperature, configurable software features, engine monitoring system SAE J1939 broadcast and control, integrated Electronic Control Unit (ECU) remote fan control

Cooling System

  • Vertical outlet thermostat housing, centrifugal water pump

Exhaust System

  • Dry exhaust manifold, Diesel Oxidation Catalyst (DOC)

Flywheels and Flywheel Housing

  • SAE 0 and SAE 1 flywheel housing

Fuel System

  • MEUI injection; primary fuel filter, secondary fuel filters, fuel transfer pump, electronic fuel priming

Lube System

  • Open crankcase ventilation system, oil cooler, oil filler, oil filter, oil dipstick, oil pump (gear driven), choice of sumps (front, rear, high-capacity center, and high-capacity front)

Power Take Off

  • SAE B and SAE C drives available, engine power can also be taken from the front of the engine on some applications

General

  • Paint: Cat yellow; vibration damper; lifting eyes

Similar New Power Solutions

3508C Land Mechanical Drilling Engine
Land Drilling Engines and Generator Sets

3508C Land Mechanical Drilling Engine

Maximum Rating: 900.0 BHP
Emissions: U.S. EPA Non-road Tier 2
Displacement: 2111.0 in³

3512C (HD) Land Mechanical Drilling Engine
Land Drilling Engines and Generator Sets

3512C (HD) Land Mechanical Drilling Engine

Maximum Rating: 1475.0 BHP
Emissions: U.S. EPA Non-road Tier 2
Displacement: 3574.0 in³

3512 Land Mechanical Drilling Engine
Land Drilling Engines and Generator Sets

3512 Land Mechanical Drilling Engine

Maximum Rating: 1800.0 BHP
Emissions: Non-certified
Displacement: 3158.0 in³

3516 Land Mechanical Drilling Engine
Land Drilling Engines and Generator Sets

3516 Land Mechanical Drilling Engine

Maximum Rating: 1649.0 BHP
Emissions: Non-certified
Displacement: 4210.0 in³

C27 ACERT Tier 4 Final
Land Drilling Engines and Generator Sets

C27 ACERT Tier 4 Final

Maximum Rating: 950.0 BHP
Emissions: U.S. EPA Non-road Tier 4 Final
Displacement: 1648.0 in³

C32 ACERT Tier 4 Final
Land Drilling Engines and Generator Sets

C32 ACERT Tier 4 Final

Maximum Rating: 1125.0 BHP
Emissions: U.S. EPA Non-road Tier 4 Final
Displacement: 1958.0 in³