CN5086 Electric Motor

Specifications

Full Specifications

Electric Motor Specifications

Voltage/Frequency
4000V ± 10%/60 Hz

Type of EX-Protection
Class 1 Division 2, Group A,B,C,D T3 (NEC or CEC)

Electric Motor Type
Squirrel Cage Induction Motor

Mounting Designation
F1 or F2

Number of Poles
8

Full Load Speed
894.0 r/min

Connection of Stator Winding
Star

Rated Torque
29366 lb/ft

Standards
NEMA MG1

Maximum Altitude - Before Derate
3000 ft

Service Factor
1.15 SF

No Load Current
200 Amps

Maximum Ambient Temperature
104 °F

Temperature Rise
Class B at rated load

Shaft
8.5 in

Insulation
Class F

Enclosure Type/Method of Cooling
WP-II

Duty
Continuous

Locked Rotor Amps
520% Code E

Full Load Current
658 Amps

Locked Rotor Torque
60%

Breakdown Torque
190%

Equipment

Standard Equipment

Bearings

• Self-lubricated sleeve bearings
• Insulated non-drive end bearings to reduce bearing currents
• Bearing RTDs for temperature monitoring

Rotors

• Designed for minimal vibration
• Dynamic balancing at full operational speed
• Fabricated copper squirrel cages
• Oversized, forged, keyless shaft
• AISI 4140/DIN42CrMo4 shaft

Stators

• Radial air ducts ensure uniform and efficient cooling
• Vacuum pressure impregnated with specially formulated epoxy resin
• 2X RTDS per Phase
• Space heater
• Welded and machined stator core retains its rigidity throughout motor life to ensure a sealed and homogeneous insulation system that results in high dielectric strength, excellent heat transfer and the elimination of hazardous internal partial discharges

Resources

CN5086 Spec Sheet