CN3086 Electric Motor for Gas Compression

Specifications

Full Specifications

Electric Motor Specifications

Voltage/Frequency
4000V & 4160V ± 10%/60 Hz

Type of EX-Protection
Class 1 Division 2 Group A,B,C,D T3 (NEC or CEC)

Mounting Designation
F1 or F2

Number of Poles
8

Full Load Speed
892 r/min

Electric Motor Type
Squirrel Cage Induction Motor

Enclosure Type/Method of Cooling
WP-II

Rated Torque
17658 lb/ft

Maximum Altitude - Before Derate
3300 ft

Maximum Ambient Temperature
104 °F

Connection of Stator Winding
Star

Shaft
8.5 in

Standards
NEMA MG1

Insulation
Class F

Temperature Rise
Class B at rated load

Duty
Continuous

Locked Rotor Torque
50%

Full Load Current
390 Amps

Service Factor
1.15 SF (1.0 VFD)

Locked Rotor Amps
490% Code E

No Load Current
108 Amps

Equipment

Standard Equipment

Bearings

• Bearing RTDs for temperature monitoring
• Insulated non-drive end bearings to reduce bearing currents
• Anti-friction on 1500 hp (optional)

Rotors

• Designed for minimal vibration
• Dynamic balancing at full operational speed
• Fabricated copper squirrel cages
• Forged, keyless shaft
• AISI 4140/DIN42CrMo4 shaft

Stators

• Radial air ducts ensure uniform and efficient cooling
• Vacuum pressure impregnated with specially formulated epoxy resin
• 2X RTDS per Phase
• Space heater
• Welded and machined stator core retains its rigidity throughout motor life to ensure a sealed and homogeneous insulation system that results in high dielectric strength, excellent heat transfer and the elimination of hazardous internal partial discharges

Resources

CN 3086 Spec Sheet