SECTION I: POWER UNITS AND ENGINES

(1) Rebuilt Caterpillar D3608 marine engine rated 3000 hp @ 900 RPM. Unit comes complete on deep sump pan, with industrial Woodward governor, turbo, and manifolds. Unit sold without air cleaners. Rebuilt to a 7E1205 arrangement number using Caterpillar parts. Sold with one year parts warranty. Clockwise or counterclockwise rotation available. Weight (dry) = 43,000 pounds. 17 feet long, 9 feet tall, and 6 feet wide.
PRICE: $412,500.00 outright

(2) Used Caterpillar D3608TA marine engine rated 3000 hp @ 900 RPM. Non-failed running engine with standard block and crank. Clockwise or counter-clockwise rotation available.
PRICE: $107,000.00

(3) Rebuilt Caterpillar 3512 gendrive engine rated 1650 hp @ 1800 RPM or 1100 kW. #00 housing, 21-inch industrial flywheel, EG3P actuator, standard air cleaner, alternator, and electric start. Skid mounted.
PRICE: $169,000.00

(4) Rebuilt Caterpillar 3512MUI industrial pump engine rated up to 1400 hp @ 1200 RPM. Mounted radiator, fan, fan drive, 3161 industrial governor, HMSO safety shutdowns, standard air cleaner, #00 rear housing, 21-inch industrial flywheel, and auto start. Freestanding power unit. Load tested, serviced, and painted. Sold with six-month major component parts warranty.
PRICE: $189,000.00

(5) Rebuilt Caterpillar 3512MUI gendrive engine built for D399 replacement or stand-alone application. Unit comes complete on gendrive skid with mounted radiator, fan, fan drive, EG3P actuator, safety contacts for customer-supplied 2301 controller application, standard air cleaner, #00 housing, 21-inch flywheel, water lines, and engine gauges. Load tested and painted. Horsepower requirements built to order: 1200 hp @ 1200 RPM or 1400 hp @ 1200 RPM. Sold with 6-month major component parts warranty.
PRICE: $179,000.00


(6) Used Caterpillar 3512 gendrive engine rated 1350 hp @ 1800 RPM. Sold front hub to flywheel, #00 housing, 21-inch flywheel, EG3P governor, standard air cleaner, and electric start. Skid mounted. Approximately 3,000 hours since new.
PRICE: $110,000.00

(7) Rebuilt Caterpillar D399TA “B” industrial engine rated 1300 hp @ 1200 RPM. Front hub to #00 flywheel housing, 21-inch industrial flywheel, gauge panel, and safety shutdowns.
PRICE: $135,000.00

(8) Used D399 “B” engine / gendrive application with #00 housing and 21-inch flywheel. Sold front hub to flywheel on GenSet rails.
PRICE: $20,000.00

(9) New surplus Caterpillar C32 industrial engine rated 1200 hp @ 2100 RPM. Arrangement number 263-8150. Front hub to flywheel. 24 Volt alternator, 24 Volt electric start. Engine only.
PRICE: $100,000.00

(10) Rebuilt D398TA industrial or EPG drive engine rated 900 hp @ 1200 RPM. Rebuilt with Caterpillar parts. Unit has standard air cleaner, electric start, alternator, #00 housing, and 21-inch flywheel. Skid mounted.
PRICE: $100,000.00

(11) Used Caterpillar D379TA engine rated 550 horsepower @ 1200 RPM. Standard air cleaner, #00 housing, industrial flywheel, mechanical safety shutdowns. Load tested, serviced, and painted. Low hour take out; 6,500 hours total time. Good runner. Sold front hub to flywheel.
PRICE: $45,000.00

(12) Used Caterpillar 3412DITTA B gendrive core rated 900 hp @ 1800 RPM, or 600 kW. Front hub to flywheel. #0 housing, 18-inch industrial flywheel. Engine only.
PRICE: $25,000.00

(13) Rebuilt Caterpillar 3508TA MUI industrial engine rated 800 hp @ 1200 RPM. Complete with radiator, fan, fan drive, safety shutdowns, alternator, electric start, engine gauges, standard air cleaner, EG3P governor drive, #00 housing, and 21-inch industrial flywheel. Radiator to flywheel. Load tested and painted. Caterpillar parts warranty. Skid mounted.
PRICE: $120,000.00

(14) Rebuilt Caterpillar 3412 “B” gendrive engine built for 545/600 kW or 900 horsepower @ 1800 RPM. Unit is complete with dual turbos, jacket water aftercooled, #0 housing, 18-inch flywheel, air cleaners, exhaust muffler, electric start, and charging alternator. Front hub to flywheel. EG3P or 3% governor control available.
PRICE: $64,500.00


(15) Used Caterpillar 3406 “B” industrial power unit rated 460 hp @ 2100 RPM, or 320 kW prime as a gendrive engine. Front hub to flywheel, load tested flywheel, #0 housing, 18-inch flywheel, and pos lock governor. Freestanding engine only. Approximately 4,000 hours. New rod and main bearings. Six-month major component parts warranty on crankshaft.
PRICE: $24,000.00

(16) Rebuilt Caterpillar C15 industrial engine rated 425 hp Class A @ 1800 RPM, 460 hp @ 2100 RPM. With radiator, fan, fan drive, #0 housing, 18-inch flywheel, safety shutdowns, engine gauges and monitoring, and standard air cleaner. Free-standing power unit.
PRICE: $37,000.00

(17) Rebuilt Caterpillar 3406 (B or C model) rated 420 hp Class A, 460 hp Class C. Radiator, fan, fan drive, safety shutdowns, standard air cleaner, alternator, electric start, engine gauges, 90? exhaust elbow, rear legs. Freestanding power unit with pos lock governor 10% spring. Rebuilt with Caterpillar parts. Sold with six-month major component parts warranty.
PRICE: $34,000.00
Core: $8,500.00 (engine only)

(18) Caterpillar C9 industrial engine rated 300 hp @ 2200 RPM. Comes with radiator, fan, fan drive, safety shutdowns, control panel, standard air cleaner, alternator, electric start, #1 housing, and 14-inch flywheel. Freestanding engine only.
PRICE: $27,000.00

(19) Caterpillar 6.6 industrial power unit rated 202 hp @ 2200 RPM. Includes 12 Volt alternator, electric start, safety shutdowns, mounted radiator, fan, fan drive, mounted control panel, exhaust stack cap, and standard air cleaner. Freestanding engine only.
PRICE: $14,000.00